Source: https://mokxi.com/teachers/plans/build-word-clock
Updated: 2026-11-19

Lesson plan

# Build a word clock lesson plan

A letter grid on WS2812 LEDs that spells the time: words as numbers, a snake-wired panel, a DS3231, brightness by light and animations.

3 chapters, 6 lessons, about 5 hours, on the Arduino Uno R3. Every lesson runs in the browser, with nothing to install.

Start a class from this course

The unit

## Objectives and materials

### By the end, students can

- Design a face of letters and turn any time into words.
- A real-time clock and a face that follows the room.
- Animations, setting the time and a clock of your own design.

### Materials for the whole unit

- Addressable RGB LEDs
- Arduino Uno R3
- Light sensor, BH1750
- Real-time clock, DS3231

Every part is already on the simulator’s bench, so there is nothing to buy or hand out. The counts are the most any one lesson uses, if you build it on real breadboards too.

Chapter 1. About 2 h

## Letters and words

Design a face of letters and turn any time into words.

Lesson | Time | What students do

A letter grid Design an 11 x 10 face that holds every word a clock needs, put an LED behind each letter, and find any word on it. | 60 min

- A block of letters
- Test every letter
- Read the face
- Find a word
- Seven LEDs

Mapping words to LEDs Keep each word as a row, a column and a length, pick words for any time rounded to five minutes, and find the LED behind each letter on a snake-wired panel. | 60 min

- Words as numbers
- Twenty past three
- Count the letters
- Quarter to
- On the hour

### Materials

- Addressable RGB LEDs
- Arduino Uno R3
- Light sensor, BH1750
- Real-time clock, DS3231

### Check for understanding

Each student finishes "Mapping words to LEDs" on their own, without opening the hints. The simulator checks 5 of its 5 steps as they go.

Then ask each one to explain, in a sentence or two, the last thing it asked of them: "On the hour".

Chapter 2. About 1 h 30 min

## Time and light

A real-time clock and a face that follows the room.

Lesson | Time | What students do

RTC time Read the time from a DS3231 every second, relight the face when the minute changes, and show the minutes between fives as dots. | 45 min

- A clock that keeps time
- The time in words
- Minute dots
- Twenty five past

Brightness by light Read lux from a BH1750 and dim the face at night and brighten it by day, from 8 to 255, without flicker. | 45 min

- A light meter
- Lights out
- Daylight
- Still telling the time

### Materials

- Addressable RGB LEDs
- Arduino Uno R3
- Light sensor, BH1750
- Real-time clock, DS3231

### Check for understanding

Each student finishes "Brightness by light" on their own, without opening the hints. The simulator checks 4 of its 4 steps as they go.

Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Still telling the time".

Chapter 3. About 1 h 30 min

## A desk clock

Animations, setting the time and a clock of your own design.

Lesson | Time | What students do

Animations Mark every new five minutes with a sparkle of random letters and a wipe that sweeps the new words in, and play them on request. | 45 min

- Sparkle
- Wipe
- Every five minutes
- Back to the time

Project: a desk word clock Put it all together: real time, brightness by light and animations, set the clock from the serial monitor, then design and build your own face. | 45 min

- The desk clock
- Set the time
- Quarter to eight
- Make your own

### Materials

- Addressable RGB LEDs
- Arduino Uno R3
- Light sensor, BH1750
- Real-time clock, DS3231

### Check for understanding

Each student finishes "Project: a desk word clock" on their own, without opening the hints. The simulator checks 4 of its 4 steps as they go.

Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Make your own".

Your class

## Teach this unit as a class

Start a class from this course and its 6 lessons are assigned in one go, in order. Students join with a six-character code or printed login cards, and each one’s work comes back to you.

The class tools are free for 30 days for one class of up to 20 students, with no card. The lessons themselves are free either way.

Start a class from this course See the demo class

More units

## Other lesson plans

Electronics basics 20 lessons, about 10 h. Embedded on the Arduino Uno 16 lessons, about 12 h. Embedded on the ESP32-C3 13 lessons, about 11 h. Embedded on the Raspberry Pi Pico 7 lessons, about 6 h. Build your own fight stick 5 lessons, about 4 h. Embedded on the STM32F411 6 lessons, about 6 h. C++ on a board 13 lessons, about 10 h. Digital logic and memory 4 lessons, about 4 h. Interactive devices on the Uno 9 lessons, about 8 h. From gates to a computer 23 lessons, about 16 h. Build a claw machine 8 lessons, about 6 h. Every unit All the courses as ready-made units, on the teachers page.
