Source: https://mokxi.com/teachers/plans/build-sumo-robot
Updated: 2026-11-19

Lesson plan

# Build a sumo robot lesson plan

A mini-sumo robot from the rules up: a legal start, edge sensors that always win, an ultrasonic eye, a state machine with real strategies, and the physics of grip and torque, ending in a tournament.

3 chapters, 6 lessons, about 5 hours, on the Arduino Uno R3. Every lesson runs in the browser, with nothing to install.

Start a class from this course

The unit

## Objectives and materials

### By the end, students can

- The real mini-sumo rules, a state machine that obeys them, and edge sensors that keep the robot in.
- An ultrasonic eye with a charge distance and a filter, then three ways to search and an opening move.
- Traction against torque in newtons, a tired pack, and a robot ready for a real tournament.

### Materials for the whole unit

- Arduino Uno R3
- Battery: AA, coin cell, LiPo
- Line sensor, TCRT5000 x 2
- Motor driver, TB6612FNG
- Pushbutton
- Robot car chassis, 2WD
- Ultrasonic ranger

Every part is already on the simulator’s bench, so there is nothing to buy or hand out. The counts are the most any one lesson uses, if you build it on real breadboards too.

Chapter 1. About 1 h 40 min

## Rules and the ring

The real mini-sumo rules, a state machine that obeys them, and edge sensors that keep the robot in.

Lesson | Time | What students do

The rules of mini-sumo Two robots, one ring, push the other one out. The real mini-sumo rules in numbers, and the first rule a robot has to obey in code: hands off for five seconds. | 50 min

- Run it
- Press start
- Fight
- Make it legal

Edge sensors A robot that drives out of the ring loses on its own. Two TCRT5000s on the front corners watch for the border, and the check for them beats everything else the robot wants to do. | 50 min

- Find the border
- Reverse, hard
- Turn away
- The border always wins

### Materials

- Arduino Uno R3
- Battery: AA, coin cell, LiPo
- Line sensor, TCRT5000 x 2
- Motor driver, TB6612FNG
- Pushbutton
- Robot car chassis, 2WD
- Ultrasonic ranger

### Check for understanding

Each student finishes "Edge sensors" on their own, without opening the hints. The simulator checks 4 of its 4 steps as they go.

Then ask each one to explain, in a sentence or two, the last thing it asked of them: "The border always wins".

Chapter 2. About 1 h 50 min

## Find and fight

An ultrasonic eye with a charge distance and a filter, then three ways to search and an opening move.

Lesson | Time | What students do

Opponent sensing An HC-SR04 finds the other robot by the echo of a 40 kHz chirp. Time the pings, choose a charge distance that fits the ring, and stop a single missed echo from wrecking a charge. | 60 min

- Found it
- Fourteen pings a second
- Out of reach
- Lost it
- Hold the charge

Strategies Spin, wait, or sweep: three ways to search, each with a weakness. Try them, add an opening move, and make one the robot’s default. | 50 min

- The turtle
- The arc
- An opening move
- Pick your default

### Materials

- Arduino Uno R3
- Battery: AA, coin cell, LiPo
- Line sensor, TCRT5000 x 2
- Motor driver, TB6612FNG
- Pushbutton
- Robot car chassis, 2WD
- Ultrasonic ranger

### Check for understanding

Each student finishes "Strategies" on their own, without opening the hints. The simulator checks 4 of its 4 steps as they go.

Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Pick your default".

Chapter 3. About 1 h 40 min

## Push and win

Traction against torque in newtons, a tired pack, and a robot ready for a real tournament.

Lesson | Time | What students do

Pushing power Sumo is won by force, and force comes from grip and torque. Measure the charge, work out which one runs out first, and see what bigger wheels and a tired pack do. | 50 min

- The charge
- Grip or torque
- Bigger wheels
- A tired pack

Project: a tournament Get the robot ready for a real tournament: a charge distance for the 77 cm ring, a round timer, and a full rule-legal match, start to finish. | 50 min

- Check in
- Fit the ring
- A round timer
- Match day

### Materials

- Arduino Uno R3
- Battery: AA, coin cell, LiPo
- Line sensor, TCRT5000 x 2
- Motor driver, TB6612FNG
- Pushbutton
- Robot car chassis, 2WD
- Ultrasonic ranger

### Check for understanding

Each student finishes "Project: a tournament" on their own, without opening the hints. The simulator checks 4 of its 4 steps as they go.

Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Match day".

Your class

## Teach this unit as a class

Start a class from this course and its 6 lessons are assigned in one go, in order. Students join with a six-character code or printed login cards, and each one’s work comes back to you.

The class tools are free for 30 days for one class of up to 20 students, with no card. The lessons themselves are free either way.

Start a class from this course See the demo class

More units

## Other lesson plans

Electronics basics 20 lessons, about 10 h. Embedded on the Arduino Uno 16 lessons, about 12 h. Embedded on the ESP32-C3 13 lessons, about 11 h. Embedded on the Raspberry Pi Pico 7 lessons, about 6 h. Build your own fight stick 5 lessons, about 4 h. Embedded on the STM32F411 6 lessons, about 6 h. C++ on a board 13 lessons, about 10 h. Digital logic and memory 4 lessons, about 4 h. Interactive devices on the Uno 9 lessons, about 8 h. From gates to a computer 23 lessons, about 16 h. Build a claw machine 8 lessons, about 6 h. Every unit All the courses as ready-made units, on the teachers page.
