Source: https://mokxi.com/teachers/plans/build-reaction-pods
Updated: 2026-11-19

Lesson plan

# Build reaction training pods lesson plan

Touch pads, LED rings and a wireless pod on nRF24L01: random drills timed to the millisecond, scores and a record that survives the night.

2 chapters, 6 lessons, about 5 hours, on the Arduino Uno R3. Every lesson runs in the browser, with nothing to install.

Start a class from this course

The unit

## Objectives and materials

### By the end, students can

- Touch pads, colors and a pod that talks by radio.
- Random drills, fair scores and a full training session.

### Materials for the whole unit

- 2.4 GHz radio, nRF24L01+ x 2
- Addressable RGB LEDs x 3
- Arduino Uno R3 x 2
- Touch sensor, TTP223 x 3

Every part is already on the simulator’s bench, so there is nothing to buy or hand out. The counts are the most any one lesson uses, if you build it on real breadboards too.

Chapter 1. About 2 h 35 min

## Pods

Touch pads, colors and a pod that talks by radio.

Lesson | Time | What students do

Touch pads Read TTP223 touch pads that feel a finger through plastic, with their half-second start and 60 ms answer, and light each pod's ring under a finger. | 55 min

- Three pods
- A finger reads HIGH
- Touched
- Ring on
- Let go

Lights Make the rings speak in colors: dim blue for waiting, green for go, red for a miss, with a touch on the green pod putting it out. | 45 min

- Green means go
- Hit it
- Too slow
- All eight green

Pods talking Link a wireless pod with nRF24L01 radios: the hub tells pod C to light, pod C times the touch on its own clock and radios the result back. | 55 min

- The hub
- Pod C
- Light up
- Green over the air
- Timed at the pod

### Materials

- 2.4 GHz radio, nRF24L01+ x 2
- Addressable RGB LEDs x 3
- Arduino Uno R3 x 2
- Touch sensor, TTP223 x 3

### Check for understanding

Each student finishes "Pods talking" on their own, without opening the hints. The simulator checks 5 of its 5 steps as they go.

Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Timed at the pod".

Chapter 2. About 2 h 25 min

## Training

Random drills, fair scores and a full training session.

Lesson | Time | What students do

Drills Run a drill of ten lights in random order after random gaps across all three pods, and time every reaction to the millisecond. | 55 min

- Ready
- Start
- Hit
- Missed
- Ten lights

Scores Score a drill fairly: hits, misses counted as the full timeout, the average and the best reaction, a rating, and a record kept in EEPROM. | 45 min

- A record to beat
- Session over
- Rating
- New record

Project: a training session Run real training sessions on the three pods, see what a session of misses scores, then make the drills your own and build pods for a gym. | 45 min

- Warm up
- Train
- Hands off
- Build your pods

### Materials

- 2.4 GHz radio, nRF24L01+ x 2
- Addressable RGB LEDs x 3
- Arduino Uno R3 x 2
- Touch sensor, TTP223 x 3

### Check for understanding

Each student finishes "Project: a training session" on their own, without opening the hints. The simulator checks 4 of its 4 steps as they go.

Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Build your pods".

Your class

## Teach this unit as a class

Start a class from this course and its 6 lessons are assigned in one go, in order. Students join with a six-character code or printed login cards, and each one’s work comes back to you.

The class tools are free for 30 days for one class of up to 20 students, with no card. The lessons themselves are free either way.

Start a class from this course See the demo class

More units

## Other lesson plans

Electronics basics 20 lessons, about 10 h. Embedded on the Arduino Uno 16 lessons, about 12 h. Embedded on the ESP32-C3 13 lessons, about 11 h. Embedded on the Raspberry Pi Pico 7 lessons, about 6 h. Build your own fight stick 5 lessons, about 4 h. Embedded on the STM32F411 6 lessons, about 6 h. C++ on a board 13 lessons, about 10 h. Digital logic and memory 4 lessons, about 4 h. Interactive devices on the Uno 9 lessons, about 8 h. From gates to a computer 23 lessons, about 16 h. Build a claw machine 8 lessons, about 6 h. Every unit All the courses as ready-made units, on the teachers page.
