Source: https://mokxi.com/learn/path/space-rover
Updated: 2026-11-20

All paths

# Mars rover

Drive by counting wheel slots, see hazards, do the science, then send your rover on a full mission.

Arduino Uno R3 Free 4 lessons 4 h 2 chapters 1,538 XP Maker · Advanced +250 XP

0 of 4 done

Start the course free Drive by counting Build it as a kit Retails for about $59, free on Mokxi. Lesson plan for teachers

What you will build

## 2 projects, built step by step

4 lessons in 2 chapters, about 4 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### See the hazard

Range with a VL53L0X time-of-flight sensor, stop before a rock, turn the mast to look both ways and choose the clearer side.
Open it in the simulator

Chapter 2 project

### The mission

Put it all together: dead reckoning to three waypoints, hazard avoidance on the way, a sample at each stop, and a report home.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Mobility

Know how far you have gone, and stop before the rock.

Open 212 XP

### Drive by counting

Turn wheel-encoder slots into millimeters: drive half a meter without looking, then make a quarter turn from the difference between the wheels.

0 of 4 steps

Start What is in it

Project Locked 500 XP

### See the hazard

Range with a VL53L0X time-of-flight sensor, stop before a rock, turn the mast to look both ways and choose the clearer side.

0 of 5 steps

Chapter 2

## Science and the mission

Measure the ground, log it, and drive the whole route alone.

Locked 250 XP

### Do some science

Calibrate a soil probe and a light sensor the right way up, show them on an OLED, and log numbered samples like a real instrument.

0 of 5 steps

Project Locked 576 XP

### The mission

Put it all together: dead reckoning to three waypoints, hazard avoidance on the way, a sample at each stop, and a report home.

0 of 6 steps

Syllabus

## Every lesson in the course

All 4 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Mobility

- Drive by counting Turn wheel-encoder slots into millimeters: drive half a meter without looking, then make a quarter turn from the difference between the wheels.
- See the hazard Range with a VL53L0X time-of-flight sensor, stop before a rock, turn the mast to look both ways and choose the clearer side.

Chapter 2

### Science and the mission

- Do some science Calibrate a soil probe and a light sensor the right way up, show them on an OLED, and log numbered samples like a real instrument.
- The mission Put it all together: dead reckoning to three waypoints, hazard avoidance on the way, a sample at each stop, and a report home.

Keep going

## The next course on your track

Mars rover is part of the robotics track, a ladder of courses from zero to expert.

Next course

### Build a claw machine

Build a real arcade claw machine piece by piece, from one stepper motor to coins, a clock, a win sensor, lights and sound.
Open the next course

Track

### Robotics track

Motors, servos, sensors and PID control loops, then a rover, a claw machine and a balance bot, every lesson checked on a simulated board.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

The kit for this course

### Mars Rover Kit

An Uno, a motor driver module (L298N), a robot car chassis (2WD) and an OLED display (128x64): a rover that drives itself and does science on the way.
Open the kit

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Mars rover

Is Mars rover free?

Yes. All 4 lessons of Mars rover are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Mars rover take?

About 4 hours: 4 lessons in 2 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: See the hazard and The mission.

Where do I start?

With "Drive by counting", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
