Source: https://mokxi.com/learn/path/python-files-and-data
Updated: 2026-11-20

All paths

# Files, CSV and JSON

Build the flight computer of a weather balloon: read and write files without losing them, log a live sensor to CSV, keep settings in JSON, organize folders, survive every disk error, and ship a sensor log tool.

Raspberry Pi 4 Model B Free 7 lessons 5 h 4 chapters 2,050 XP Coding · Intermediate +150 XP

0 of 7 done

Start the course free Reading files Lesson plan for teachers

What you will build

## 3 projects, built step by step

7 lessons in 4 chapters, about 5 hours on a simulated Raspberry Pi 4 Model B. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Writing safely

Write a flight log without losing it: "w" that wipes the file, "a" that appends, newlines you have to add, print to a file, and an atomic save with os.replace that survives a power cut.
Open it in the simulator

Chapter 2 project

### JSON config

Keep a flight computer's settings in config.json: load it, fill gaps from defaults, validate it with clear messages, save it back atomically with indent and sort_keys, and learn what JSON changes on the way through.
Open it in the simulator

Chapter 3 project

### Errors on disk

Make a flight computer that keeps going when files go wrong: a missing config, a config cut off by a power failure, folders where files should be, bad rows in a CSV, try/except/else/finally, and the OSError family by errno.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Text files

Read a flight plan, then write a log that survives a power cut.

Open 205 XP

### Reading files

Read a balloon's flight plan from a text file: the whole file, its lines and their hidden newlines, a loop that skips comments, a key: value parser, and the bytes underneath the text.

0 of 5 steps

Start What is in it

Project Locked 410 XP

### Writing safely

Write a flight log without losing it: "w" that wipes the file, "a" that appends, newlines you have to add, print to a file, and an atomic save with os.replace that survives a power cut.

0 of 5 steps

4 questions, graded as you go.

Chapter 2

## CSV and JSON

Rows of readings in CSV, settings in JSON.

Locked 205 XP

### CSV in and out

Read a recorded balloon flight with DictReader, turn pressure into altitude, log the live BME280 to a CSV with csv.writer, append with a header only once, and see how commas and quotes inside values survive.

0 of 5 steps

Project Locked 410 XP

### JSON config

Keep a flight computer's settings in config.json: load it, fill gaps from defaults, validate it with clear messages, save it back atomically with indent and sort_keys, and learn what JSON changes on the way through.

0 of 5 steps

4 questions, graded as you go.

Chapter 3

## Folders and failures

Organize the files, and keep going when the disk says no.

Locked 205 XP

### Paths and folders

Organize a flight computer's files: the working folder, folders by date with makedirs, numbered log names that never overwrite, pathlib's Path objects, and a walk over the whole tree with sizes.

0 of 5 steps

Project Locked 410 XP

### Errors on disk

Make a flight computer that keeps going when files go wrong: a missing config, a config cut off by a power failure, folders where files should be, bad rows in a CSV, try/except/else/finally, and the OSError family by errno.

0 of 5 steps

5 questions, graded as you go.

Chapter 4

## Project

A sensor log tool for launch day.

Locked 205 XP

### Project: a sensor log tool

Skylark's ground tool, from everything in the course: a config with defaults, numbered CSV logs of the live BME280 in a folder, a list of logs with rows and sizes, a summary saved as JSON atomically, and temperature alarms from the config.

0 of 5 steps

4 questions, graded as you go.

Syllabus

## Every lesson in the course

All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Text files

- Reading files Read a balloon's flight plan from a text file: the whole file, its lines and their hidden newlines, a loop that skips comments, a key: value parser, and the bytes underneath the text.
- Writing safely Write a flight log without losing it: "w" that wipes the file, "a" that appends, newlines you have to add, print to a file, and an atomic save with os.replace that survives a power cut.

Chapter 2

### CSV and JSON

- CSV in and out Read a recorded balloon flight with DictReader, turn pressure into altitude, log the live BME280 to a CSV with csv.writer, append with a header only once, and see how commas and quotes inside values survive.
- JSON config Keep a flight computer's settings in config.json: load it, fill gaps from defaults, validate it with clear messages, save it back atomically with indent and sort_keys, and learn what JSON changes on the way through.

Chapter 3

### Folders and failures

- Paths and folders Organize a flight computer's files: the working folder, folders by date with makedirs, numbered log names that never overwrite, pathlib's Path objects, and a walk over the whole tree with sizes.
- Errors on disk Make a flight computer that keeps going when files go wrong: a missing config, a config cut off by a power failure, folders where files should be, bad rows in a CSV, try/except/else/finally, and the OSError family by errno.

Chapter 4

### Project

- Project: a sensor log tool Skylark's ground tool, from everything in the course: a config with defaults, numbered CSV logs of the live BME280 in a folder, a list of logs with rows and sizes, a summary saved as JSON atomically, and temperature alarms from the config.

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Files, CSV and JSON

Is Files, CSV and JSON free?

Yes. All 7 lessons of Files, CSV and JSON are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Raspberry Pi 4 Model B?

No. Every lesson runs on a simulated Raspberry Pi 4 Model B with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Files, CSV and JSON take?

About 5 hours: 7 lessons in 4 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Writing safely, JSON config and Errors on disk.

Where do I start?

With "Reading files", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
