Source: https://mokxi.com/learn/path/oscillators-and-timing-circuits
Updated: 2026-11-20

All paths

# Oscillators and timing circuits

The 555 in depth, the monostable, Schmitt and CD4060 oscillators, RC phase shift and Wien bridge sines, ending in a tone generator tuned to concert A.

Free 7 lessons 6 h 7 chapters 1,373 XP Electrical · Intermediate +150 XP

0 of 7 done

Start the course free 555 astable, in depth Lesson plan for teachers

What you will build

## 0 projects, built step by step

7 lessons in 7 chapters, about 6 hours on a simulated breadboard. Free, in your browser, every step checked by the simulator.

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## 555 astable deep

Frequency, duty, the 50 percent floor and the diode that breaks it.

Open 236 XP

### 555 astable, in depth

A 555 runs free at 68.6 Hz: the frequency and duty formulas, the capacitor between a third and two thirds of the supply, a tenth of the capacitor, a predicted resistor, a diode that breaks the 50 percent floor, and a slow blink.

0 of 6 steps

Start What is in it

4 questions, graded as you go.

Chapter 2

## Monostable

One pulse per trigger: T = 1.1 RC.

Locked 174 XP

### Monostable: one pulse per trigger

A 555 monostable makes one pulse of about 1.1 s per press of a button: T = 1.1 RC, a smaller capacitor for a shorter pulse, a predicted long pulse, and why monostables clean up switches and stretch short events.

0 of 4 steps

3 questions, graded as you go.

Chapter 3

## Schmitt oscillators

One gate, one resistor, one capacitor.

Locked 174 XP

### Schmitt oscillators: one gate, one R, one C

A 74HC14 inverter with hysteresis and an RC around it oscillates on its own: the frequency, an uneven duty from uneven thresholds, double the capacitor, a predicted resistor, and a second gate as a buffer.

0 of 4 steps

3 questions, graded as you go.

Chapter 4

## CD4060 dividers

An RC oscillator and fourteen halvings.

Locked 205 XP

### CD4060 dividers: slow and steady from fast

A CD4060's RC oscillator at 4.5 kHz and its binary dividers: Q4 at a sixteenth, Q7 at a 128th, a predicted capacitor, and how a one-minute timer comes out of fourteen flip-flops.

0 of 5 steps

3 questions, graded as you go.

Chapter 5

## RC phase shift

Three stages, 180 degrees and a gain of 29.

Locked 174 XP

### RC phase shift: three stages and a gain of 29

An LM358 inverting amplifier fed back through three RC stages: 650 Hz from the formula, the size of the wave, twice the capacitors, and a predicted retune.

0 of 4 steps

3 questions, graded as you go.

Chapter 6

## Wien bridge

A gain of 3 on one supply.

Locked 174 XP

### Wien bridge on one supply

The Wien bridge from the op-amp cookbook, rebuilt on an LM358 from one 9 V supply: a 4.5 V bias, 1592 Hz from 1 / (2 pi RC), the sine's size, both capacitors retuned together, and a predicted resistor pair.

0 of 4 steps

3 questions, graded as you go.

Chapter 7

## Boss build

A divided 555 tuned to 440 Hz.

Locked 236 XP

### Boss: a steady tone generator

A 555 at about 7 kHz clocks a CD4060 that divides it by 16 into an LM358 buffer and a piezo: wire the clock, read both counters, tune the 555 to concert A at 440 Hz, then drop it an octave.

0 of 6 steps

3 questions, graded as you go.

Syllabus

## Every lesson in the course

All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### 555 astable deep

- 555 astable, in depth A 555 runs free at 68.6 Hz: the frequency and duty formulas, the capacitor between a third and two thirds of the supply, a tenth of the capacitor, a predicted resistor, a diode that breaks the 50 percent floor, and a slow blink.

Chapter 2

### Monostable

- Monostable: one pulse per trigger A 555 monostable makes one pulse of about 1.1 s per press of a button: T = 1.1 RC, a smaller capacitor for a shorter pulse, a predicted long pulse, and why monostables clean up switches and stretch short events.

Chapter 3

### Schmitt oscillators

- Schmitt oscillators: one gate, one R, one C A 74HC14 inverter with hysteresis and an RC around it oscillates on its own: the frequency, an uneven duty from uneven thresholds, double the capacitor, a predicted resistor, and a second gate as a buffer.

Chapter 4

### CD4060 dividers

- CD4060 dividers: slow and steady from fast A CD4060's RC oscillator at 4.5 kHz and its binary dividers: Q4 at a sixteenth, Q7 at a 128th, a predicted capacitor, and how a one-minute timer comes out of fourteen flip-flops.

Chapter 5

### RC phase shift

- RC phase shift: three stages and a gain of 29 An LM358 inverting amplifier fed back through three RC stages: 650 Hz from the formula, the size of the wave, twice the capacitors, and a predicted retune.

Chapter 6

### Wien bridge

- Wien bridge on one supply The Wien bridge from the op-amp cookbook, rebuilt on an LM358 from one 9 V supply: a 4.5 V bias, 1592 Hz from 1 / (2 pi RC), the sine's size, both capacitors retuned together, and a predicted resistor pair.

Chapter 7

### Boss build

- Boss: a steady tone generator A 555 at about 7 kHz clocks a CD4060 that divides it by 16 into an LM358 buffer and a piezo: wire the clock, read both counters, tune the 555 to concert A at 440 Hz, then drop it an octave.

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Oscillators and timing circuits

Is Oscillators and timing circuits free?

Yes. All 7 lessons of Oscillators and timing circuits are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need any parts?

No. Every circuit is built on a simulated breadboard, and the simulator checks each step as you go. When you want to build it for real, the same parts and wiring work on a real bench.

How long does Oscillators and timing circuits take?

About 6 hours: 7 lessons in 7 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

Where do I start?

With "555 astable, in depth", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
