Source: https://mokxi.com/learn/path/home-assistant-devices
Updated: 2026-11-20

All paths

# Home Assistant devices

Build the sensors and switches people put around the house on an ESP32-C3, and see how each reading reaches Home Assistant.

ESP32-C3-DevKitM-1 Free 5 lessons 5 h 3 chapters 1,087 XP Maker · Intermediate +150 XP

0 of 5 done

Start the course free A room multisensor Lesson plan for teachers

What you will build

## 2 projects, built step by step

5 lessons in 3 chapters, about 5 hours on a simulated ESP32-C3-DevKitM-1. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### A calibrated plant sensor

A capacitive soil sensor turned into a moisture percentage you can trust, a light level, and a thirsty alert that does not flicker. A sensor only, with no pump.
Open it in the simulator

Chapter 2 project

### An LED strip controller

On, off, brightness, color and effects with a smooth fade, from buttons on the strip or from the network, plus the power rules for real strips.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Sensors that report

Read a room and a plant pot, and turn each reading into a message.

Open 169 XP

### A room multisensor

Temperature, humidity, light and motion on one board: the sensor Home Assistant users build first, and how each reading becomes a message.

0 of 5 steps

Start What is in it

Project Locked 312 XP

### A calibrated plant sensor

A capacitive soil sensor turned into a moisture percentage you can trust, a light level, and a thirsty alert that does not flicker. A sensor only, with no pump.

0 of 4 steps

Chapter 2

## Presence and light

Use a radar for occupancy and drive an LED strip that fades.

Locked 138 XP

### A radar hallway light

An RCWL-0516 radar, an off delay so a pause does not plunge you into the dark, and a light that only comes on when it is dark.

0 of 4 steps

Project Locked 312 XP

### An LED strip controller

On, off, brightness, color and effects with a smooth fade, from buttons on the strip or from the network, plus the power rules for real strips.

0 of 4 steps

Chapter 3

## Control something heavy

Press a garage door button safely and know where the door really is.

Locked 156 XP

### A garage door opener

A relay that presses the wall button for half a second and two reed switches that report where the door really is, with the safety rules that come first.

0 of 4 steps

Syllabus

## Every lesson in the course

All 5 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Sensors that report

- A room multisensor Temperature, humidity, light and motion on one board: the sensor Home Assistant users build first, and how each reading becomes a message.
- A calibrated plant sensor A capacitive soil sensor turned into a moisture percentage you can trust, a light level, and a thirsty alert that does not flicker. A sensor only, with no pump.

Chapter 2

### Presence and light

- A radar hallway light An RCWL-0516 radar, an off delay so a pause does not plunge you into the dark, and a light that only comes on when it is dark.
- An LED strip controller On, off, brightness, color and effects with a smooth fade, from buttons on the strip or from the network, plus the power rules for real strips.

Chapter 3

### Control something heavy

- A garage door opener A relay that presses the wall button for half a second and two reed switches that report where the door really is, with the safety rules that come first.

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Home Assistant devices

Is Home Assistant devices free?

Yes. All 5 lessons of Home Assistant devices are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real ESP32-C3-DevKitM-1?

No. Every lesson runs on a simulated ESP32-C3-DevKitM-1 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Home Assistant devices take?

About 5 hours: 5 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: A calibrated plant sensor and An LED strip controller.

Where do I start?

With "A room multisensor", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
