Source: https://mokxi.com/learn/path/health-and-biometric-sensors
Updated: 2026-11-20

All paths

# Heart, skin and body sensors

Pulse and SpO2 from light, ECG beats, skin response, contactless temperature and fingerprints, the honest limits of all of them, then a fitness monitor. Learning projects, battery powered, never medical devices.

Arduino Uno R3 Free 7 lessons 6 h 4 chapters 2,420 XP Embedded engineering · Intermediate +150 XP

0 of 7 done

Start the course free Pulse and SpO2 from light Lesson plan for teachers

What you will build

## 3 projects, built step by step

7 lessons in 4 chapters, about 6 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### ECG with the AD8232

The heart’s electrical signal from three skin electrodes: R spikes found with a threshold and a refractory time, the R-R interval, electrodes checked, and why it runs on a battery.
Open it in the simulator

Chapter 2 project

### MLX90614 contactless temperature

An MLX90614 reads infrared glow without touching: the object and its own ambient, the field of view, a hot-surface warning, and why a forehead is not the inside of a body.
Open it in the simulator

Chapter 3 project

### Honest medical limits

The same oximeter with the rules a careful readout needs: no finger, no number; the settling window thrown away; numbers outside what the method can measure refused; and plain words about what it is.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Heart

Pulse from light and beats from the skin.

Open 267 XP

### Pulse and SpO2 from light

A MAX30102 shines red and infrared light into a fingertip: the steady level, the pulse riding on it, the heart rate in its rhythm and an SpO2 estimate from the two colors.

0 of 7 steps

Start What is in it

Project Locked 534 XP

### ECG with the AD8232

The heart’s electrical signal from three skin electrodes: R spikes found with a threshold and a refractory time, the R-R interval, electrodes checked, and why it runs on a battery.

0 of 7 steps

4 questions, graded as you go.

Chapter 2

## Skin and body

Skin response and contactless temperature.

Locked 218 XP

### GSR: skin response

A Grove GSR module in microsiemens: the slow tonic level, the quick responses on top of it, and an honest look at what skin response can and cannot say.

0 of 6 steps

Project Locked 436 XP

### MLX90614 contactless temperature

An MLX90614 reads infrared glow without touching: the object and its own ambient, the field of view, a hot-surface warning, and why a forehead is not the inside of a body.

0 of 6 steps

4 questions, graded as you go.

Chapter 3

## Identity and honesty

Fingerprints, and the limits of every body sensor.

Locked 218 XP

### Fingerprint modules

An optical fingerprint module with its own processor: templates kept on the module, a search that returns an ID and a confidence, an admin finger, and why fingerprints are not passwords.

0 of 6 steps

Project Locked 498 XP

### Honest medical limits

The same oximeter with the rules a careful readout needs: no finger, no number; the settling window thrown away; numbers outside what the method can measure refused; and plain words about what it is.

0 of 7 steps

4 questions, graded as you go.

Chapter 4

## Boss

A fitness monitor.

Locked 249 XP

### Boss: a fitness monitor

A MAX30102 pulse, an MLX90614 skin temperature and an OLED showing the heart rate zone for a workout, with every honest rule from the course built in.

0 of 7 steps

3 questions, graded as you go.

Syllabus

## Every lesson in the course

All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Heart

- Pulse and SpO2 from light A MAX30102 shines red and infrared light into a fingertip: the steady level, the pulse riding on it, the heart rate in its rhythm and an SpO2 estimate from the two colors.
- ECG with the AD8232 The heart’s electrical signal from three skin electrodes: R spikes found with a threshold and a refractory time, the R-R interval, electrodes checked, and why it runs on a battery.

Chapter 2

### Skin and body

- GSR: skin response A Grove GSR module in microsiemens: the slow tonic level, the quick responses on top of it, and an honest look at what skin response can and cannot say.
- MLX90614 contactless temperature An MLX90614 reads infrared glow without touching: the object and its own ambient, the field of view, a hot-surface warning, and why a forehead is not the inside of a body.

Chapter 3

### Identity and honesty

- Fingerprint modules An optical fingerprint module with its own processor: templates kept on the module, a search that returns an ID and a confidence, an admin finger, and why fingerprints are not passwords.
- Honest medical limits The same oximeter with the rules a careful readout needs: no finger, no number; the settling window thrown away; numbers outside what the method can measure refused; and plain words about what it is.

Chapter 4

### Boss

- Boss: a fitness monitor A MAX30102 pulse, an MLX90614 skin temperature and an OLED showing the heart rate zone for a workout, with every honest rule from the course built in.

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Heart, skin and body sensors

Is Heart, skin and body sensors free?

Yes. All 7 lessons of Heart, skin and body sensors are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Heart, skin and body sensors take?

About 6 hours: 7 lessons in 4 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: ECG with the AD8232, MLX90614 contactless temperature and Honest medical limits.

Where do I start?

With "Pulse and SpO2 from light", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
