Source: https://mokxi.com/learn/path/halloween-prop
Updated: 2026-11-20

All paths

# Build a Halloween prop

Five porch props on the Uno, from a fog trigger to a talking skull, each one a complete build with the safety notes that go with it.

Arduino Uno R3 Free 5 lessons 5 h 3 chapters 890 XP Maker · Beginner +100 XP

0 of 5 done

Start the course free Prop 1: a fog machine trigger Build it as a kit Retails for about $66, free on Mokxi. Lesson plan for teachers

What you will build

## 2 projects, built step by step

5 lessons in 3 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Prop 2: a candy bowl that grabs back

An HC-SR04 watches across the top of the bowl. A hand reaches in, a piezo cackles and a servo swings a rubber hand down. Distance, a debounce for sensors, and a servo show.
Open it in the simulator

Chapter 2 project

### Prop 4: a talking skull

A servo jaw that moves in time with a spoken line. Two honest ways to sync a jaw to a voice, and the cue list this one uses, with BUSY to know when the line is really over.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Sense the visitor

Spot someone on the path and switch something big, safely and only once.

Open 135 XP

### Prop 1: a fog machine trigger

A PIR sees someone on the path and a relay presses the fog machine’s remote for a short burst, then a cooldown lets the fog drift. The safe way to let an Arduino switch something big.

0 of 5 steps

Start What is in it

Project Locked 250 XP

### Prop 2: a candy bowl that grabs back

An HC-SR04 watches across the top of the bowl. A hand reaches in, a piezo cackles and a servo swings a rubber hand down. Distance, a debounce for sensors, and a servo show.

0 of 4 steps

Chapter 2

## Move and speak

Open a lid and work a jaw on time with a sound from a DFPlayer.

Locked 125 XP

### Prop 3: a jump-scare box

A radar hidden inside a box sees someone walk up. A servo throws the lid open, a DFPlayer screams and two red eyes flicker, then it shuts and waits for the porch to clear.

0 of 4 steps

Project Locked 270 XP

### Prop 4: a talking skull

A servo jaw that moves in time with a spoken line. Two honest ways to sync a jaw to a voice, and the cue list this one uses, with BUSY to know when the line is really over.

0 of 5 steps

Chapter 3

## Light the scene

Run lightning and candlelight on WS2812B strips at the same time.

Locked 110 XP

### Prop 5: a haunted window

A WS2812B strip throws lightning across a window while four LEDs on the sill flicker like candles, and a knob sets the storm. Two animations at once, with no delay() anywhere.

0 of 4 steps

Syllabus

## Every lesson in the course

All 5 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Sense the visitor

- Prop 1: a fog machine trigger A PIR sees someone on the path and a relay presses the fog machine’s remote for a short burst, then a cooldown lets the fog drift. The safe way to let an Arduino switch something big.
- Prop 2: a candy bowl that grabs back An HC-SR04 watches across the top of the bowl. A hand reaches in, a piezo cackles and a servo swings a rubber hand down. Distance, a debounce for sensors, and a servo show.

Chapter 2

### Move and speak

- Prop 3: a jump-scare box A radar hidden inside a box sees someone walk up. A servo throws the lid open, a DFPlayer screams and two red eyes flicker, then it shuts and waits for the porch to clear.
- Prop 4: a talking skull A servo jaw that moves in time with a spoken line. Two honest ways to sync a jaw to a voice, and the cue list this one uses, with BUSY to know when the line is really over.

Chapter 3

### Light the scene

- Prop 5: a haunted window A WS2812B strip throws lightning across a window while four LEDs on the sill flicker like candles, and a knob sets the storm. Two animations at once, with no delay() anywhere.

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

The kit for this course

### Halloween Prop Kit

Five props for the porch: fog, a grabbing bowl, a jump scare, a skull and a window.
Open the kit

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build a Halloween prop

Is Build a Halloween prop free?

Yes. All 5 lessons of Build a Halloween prop are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build a Halloween prop take?

About 5 hours: 5 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Prop 2: a candy bowl that grabs back and Prop 4: a talking skull.

Where do I start?

With "Prop 1: a fog machine trigger", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
