Source: https://mokxi.com/learn/path/h-bridge-design
Updated: 2026-11-20

All paths

# Design an H-bridge

Build the motor driver a chip hides from four discrete MOSFETs: choose the parts, drive the high-side gates, set dead time, survive shoot-through, sense the current and brake. Ends with a working driver you characterize.

Free 7 lessons 6 h 7 chapters 1,841 XP Electrical · Advanced +250 XP

0 of 7 done

Start the course free MOSFET choice Lesson plan for teachers

What you will build

## 0 projects, built step by step

7 lessons in 7 chapters, about 6 hours on a simulated breadboard. Free, in your browser, every step checked by the simulator.

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## MOSFET choice

On-resistance, logic level and the current rating that matters.

Open 288 XP

### MOSFET choice

One N-channel MOSFET switching a 12 V motor from a logic pin. Read its on-resistance off a meter, and see why "logic level" and the current rating decide the part, not the price.

0 of 6 steps

Start What is in it

3 questions, graded as you go.

Chapter 2

## Gate drive

A P-channel high side, a level shifter, and why bootstraps exist.

Locked 265 XP

### Gate drive

A P-channel MOSFET on the high side will not turn off from a 5 V pin. Find out why from its gate voltage, fix it with an NPN level shifter, and see why N-channel high sides need a bootstrap.

0 of 6 steps

3 questions, graded as you go.

Chapter 3

## Dead time

A gap where both switches are off, measured on an ammeter.

Locked 250 XP

### Dead time

One leg of an H-bridge switched by two comparators on a triangle wave. Open a gap where both MOSFETs are off and the supply current is only the load's; close it and watch the leg start burning current for nothing.

0 of 5 steps

3 questions, graded as you go.

Chapter 4

## Shoot-through

Forward, reverse, and the short a current limit catches.

Locked 250 XP

### Shoot-through

The whole bridge: four MOSFETs, four gate switches. Forward, reverse, and the one combination that shorts the supply, caught here by the bench supply's current limit.

0 of 5 steps

3 questions, graded as you go.

Chapter 5

## Current sensing

An ACS712: running current, start surge, sign and resolution.

Locked 212 XP

### Current sensing

An ACS712 Hall-effect sensor in the motor lead: the running current, the surge at every start, the sign that says which way it flows, and a bigger motor that would trip a real driver's limit.

0 of 4 steps

3 questions, graded as you go.

Chapter 6

## Braking

Coast, brake low, brake high and plugging, on the sensor.

Locked 250 XP

### Braking

Three ways to stop a spinning motor: let it coast, short it through the low sides or the high sides, or plug it into reverse. The current sensor shows the motor turning into a generator.

0 of 5 steps

3 questions, graded as you go.

Chapter 7

## Boss: a discrete motor driver

Wire the sensor, prove every state, fit your own motor.

Locked 326 XP

### Boss: a discrete motor driver

Finish a discrete H-bridge: wire in its current sensor, prove forward, reverse and braking against the readings, show the current limit catching a shoot-through, then fit your own motor and characterize it.

0 of 7 steps

3 questions, graded as you go.

Syllabus

## Every lesson in the course

All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### MOSFET choice

- MOSFET choice One N-channel MOSFET switching a 12 V motor from a logic pin. Read its on-resistance off a meter, and see why "logic level" and the current rating decide the part, not the price.

Chapter 2

### Gate drive

- Gate drive A P-channel MOSFET on the high side will not turn off from a 5 V pin. Find out why from its gate voltage, fix it with an NPN level shifter, and see why N-channel high sides need a bootstrap.

Chapter 3

### Dead time

- Dead time One leg of an H-bridge switched by two comparators on a triangle wave. Open a gap where both MOSFETs are off and the supply current is only the load's; close it and watch the leg start burning current for nothing.

Chapter 4

### Shoot-through

- Shoot-through The whole bridge: four MOSFETs, four gate switches. Forward, reverse, and the one combination that shorts the supply, caught here by the bench supply's current limit.

Chapter 5

### Current sensing

- Current sensing An ACS712 Hall-effect sensor in the motor lead: the running current, the surge at every start, the sign that says which way it flows, and a bigger motor that would trip a real driver's limit.

Chapter 6

### Braking

- Braking Three ways to stop a spinning motor: let it coast, short it through the low sides or the high sides, or plug it into reverse. The current sensor shows the motor turning into a generator.

Chapter 7

### Boss: a discrete motor driver

- Boss: a discrete motor driver Finish a discrete H-bridge: wire in its current sensor, prove forward, reverse and braking against the readings, show the current limit catching a shoot-through, then fit your own motor and characterize it.

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Design an H-bridge

Is Design an H-bridge free?

Yes. All 7 lessons of Design an H-bridge are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need any parts?

No. Every circuit is built on a simulated breadboard, and the simulator checks each step as you go. When you want to build it for real, the same parts and wiring work on a real bench.

How long does Design an H-bridge take?

About 6 hours: 7 lessons in 7 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

Where do I start?

With "MOSFET choice", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
