Source: https://mokxi.com/learn/path/epaper-displays
Updated: 2026-11-20

All paths

# E-paper displays

E-paper on the Uno with GxEPD2: how e-ink holds a picture with no power, full and partial refresh, two-color layouts, paged drawing, fonts and icons, sleeping between updates, and an ISS pass badge for the boss.

Arduino Uno R3 Free 7 lessons 5 h 4 chapters 1,838 XP Embedded engineering · Intermediate +150 XP

0 of 7 done

Start the course free How e-ink holds an image Lesson plan for teachers

What you will build

## 2 projects, built step by step

7 lessons in 4 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Full and partial refresh

A press counter: a partial refresh of one strip in a fraction of a second, the ghosts it leaves, and a full refresh every fifth update to clean them.
Open it in the simulator

Chapter 2 project

### Fonts and icons

A weather card: GFX fonts that draw from a baseline, getTextBounds() to center a reading, and a sun and a cloud from 16x16 bitmaps.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## How e-paper works

Particles that stay put, and the two kinds of refresh.

Open 218 XP

### How e-ink holds an image

Charged particles in oil: a picture that needs power only to change. One full refresh with BUSY high for two seconds, then deep sleep and the picture stays.

0 of 6 steps

Start What is in it

Project Locked 436 XP

### Full and partial refresh

A press counter: a partial refresh of one strip in a fraction of a second, the ghosts it leaves, and a full refresh every fifth update to clean them.

0 of 6 steps

4 questions, graded as you go.

Chapter 2

## Drawing for paper

Black and white layouts, pages, fonts and icons.

Locked 187 XP

### Two-color layout

A mission status card in pure black and white: an inverted title band, boxes, a progress bar and a dotted line, all placed from width() and height() so it survives a rotation.

0 of 5 steps

Locked 187 XP

### Pages: a picture bigger than RAM

A 4000-byte picture on a board with 2048 bytes of RAM: GxEPD2 draws it in pages, the do/while loop runs once per page, and a bigger buffer means fewer passes.

0 of 5 steps

Project Locked 374 XP

### Fonts and icons

A weather card: GFX fonts that draw from a baseline, getTextBounds() to center a reading, and a sun and a cloud from 16x16 bitmaps.

0 of 5 steps

4 questions, graded as you go.

Chapter 3

## Living on a battery

Wake, draw, sleep, and the power budget.

Locked 187 XP

### Sleep between updates

A sensor display on a timer: wake, draw with a partial refresh, hibernate, and work out how long a battery lasts when the screen costs nothing between updates.

0 of 5 steps

3 questions, graded as you go.

Chapter 4

## Boss project

A badge that says when to look up for the space station.

Locked 249 XP

### Boss: an ISS pass badge

A 2.9 inch badge that counts down to the next pass of the space station: a mission patch, partial updates every minute with a full one every sixth, a details page on a button, and sleep between.

0 of 7 steps

3 questions, graded as you go.

Syllabus

## Every lesson in the course

All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### How e-paper works

- How e-ink holds an image Charged particles in oil: a picture that needs power only to change. One full refresh with BUSY high for two seconds, then deep sleep and the picture stays.
- Full and partial refresh A press counter: a partial refresh of one strip in a fraction of a second, the ghosts it leaves, and a full refresh every fifth update to clean them.

Chapter 2

### Drawing for paper

- Two-color layout A mission status card in pure black and white: an inverted title band, boxes, a progress bar and a dotted line, all placed from width() and height() so it survives a rotation.
- Pages: a picture bigger than RAM A 4000-byte picture on a board with 2048 bytes of RAM: GxEPD2 draws it in pages, the do/while loop runs once per page, and a bigger buffer means fewer passes.
- Fonts and icons A weather card: GFX fonts that draw from a baseline, getTextBounds() to center a reading, and a sun and a cloud from 16x16 bitmaps.

Chapter 3

### Living on a battery

- Sleep between updates A sensor display on a timer: wake, draw with a partial refresh, hibernate, and work out how long a battery lasts when the screen costs nothing between updates.

Chapter 4

### Boss project

- Boss: an ISS pass badge A 2.9 inch badge that counts down to the next pass of the space station: a mission patch, partial updates every minute with a full one every sixth, a details page on a button, and sleep between.

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About E-paper displays

Is E-paper displays free?

Yes. All 7 lessons of E-paper displays are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does E-paper displays take?

About 5 hours: 7 lessons in 4 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Full and partial refresh and Fonts and icons.

Where do I start?

With "How e-ink holds an image", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
