Source: https://mokxi.com/learn/path/electric-machines-dc
Updated: 2026-11-20

All paths

# DC motors and generators

The brushed DC machine as a component: torque from current, back EMF, the torque-speed line, generator mode, where the watts go, three ways to brake, and an Uno motor dyno you build yourself.

Free 7 lessons 5 h 7 chapters 1,399 XP Electrical · Intermediate +150 XP

0 of 7 done

Start the course free Torque and current Lesson plan for teachers

What you will build

## 0 projects, built step by step

7 lessons in 7 chapters, about 5 hours on a simulated breadboard. Free, in your browser, every step checked by the simulator.

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Torque and current

Torque is current, from stall to free running.

Open 236 XP

### Torque and current

A motor's torque is its current times a constant: a stalled motor at 1.2 V that cannot beat its friction, the start at 2 V, full speed at 6 V, the inrush at switch-on, and a lower-resistance winding that pulls twice the amps.

0 of 6 steps

Start What is in it

3 questions, graded as you go.

Chapter 2

## Back EMF

A spinning motor pushes back, in proportion to speed.

Locked 205 XP

### Back EMF

A spinning motor is a generator pushing back: speed proportional to voltage, the voltage it makes when the supply is cut, the constant that links them, and why the running current is so small.

0 of 5 steps

3 questions, graded as you go.

Chapter 3

## Motor curves

Free speed, stall and free current, and the line between.

Locked 218 XP

### Motor curves

Read a real motor's numbers off the bench: free speed, stall current and free current of a TT gear motor, the straight-line torque-speed curve they define, and a hobby motor that spins at twelve thousand rpm.

0 of 6 steps

3 questions, graded as you go.

Chapter 4

## Generator mode

The same machine driving a load.

Locked 174 XP

### Generator mode

The same machine run backward: a spinning motor driving current into a load, terminal voltage against load, the matched load that takes the most power, and the energy it is spending as it slows.

0 of 4 steps

3 questions, graded as you go.

Chapter 5

## Efficiency

Power in, copper loss and shaft power.

Locked 187 XP

### Efficiency

Where the watts go: input power, copper loss in the winding, and the rest turned into shaft power, at full and half voltage, and what a better motor saves.

0 of 5 steps

3 questions, graded as you go.

Chapter 6

## Braking

Coast, dynamic braking and plugging.

Locked 174 XP

### Braking

Three ways to stop a motor: coast, dynamic braking with a short or a resistor, and plugging with a reversed supply that stops it and spins it the other way.

0 of 4 steps

3 questions, graded as you go.

Chapter 7

## Boss build

An Uno motor dyno that measures a real motor.

Locked 205 XP

### Boss: characterize a motor

An Uno, an L9110S, an INA219 and an encoder gear motor become a motor dyno: sweep the PWM, find the dead band, the free speed, the free current and the back EMF constant, then change the supply, prove the speed follows, find the driver's limit, and brake it.

0 of 5 steps

3 questions, graded as you go.

Syllabus

## Every lesson in the course

All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Torque and current

- Torque and current A motor's torque is its current times a constant: a stalled motor at 1.2 V that cannot beat its friction, the start at 2 V, full speed at 6 V, the inrush at switch-on, and a lower-resistance winding that pulls twice the amps.

Chapter 2

### Back EMF

- Back EMF A spinning motor is a generator pushing back: speed proportional to voltage, the voltage it makes when the supply is cut, the constant that links them, and why the running current is so small.

Chapter 3

### Motor curves

- Motor curves Read a real motor's numbers off the bench: free speed, stall current and free current of a TT gear motor, the straight-line torque-speed curve they define, and a hobby motor that spins at twelve thousand rpm.

Chapter 4

### Generator mode

- Generator mode The same machine run backward: a spinning motor driving current into a load, terminal voltage against load, the matched load that takes the most power, and the energy it is spending as it slows.

Chapter 5

### Efficiency

- Efficiency Where the watts go: input power, copper loss in the winding, and the rest turned into shaft power, at full and half voltage, and what a better motor saves.

Chapter 6

### Braking

- Braking Three ways to stop a motor: coast, dynamic braking with a short or a resistor, and plugging with a reversed supply that stops it and spins it the other way.

Chapter 7

### Boss build

- Boss: characterize a motor An Uno, an L9110S, an INA219 and an encoder gear motor become a motor dyno: sweep the PWM, find the dead band, the free speed, the free current and the back EMF constant, then change the supply, prove the speed follows, find the driver's limit, and brake it.

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About DC motors and generators

Is DC motors and generators free?

Yes. All 7 lessons of DC motors and generators are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need any parts?

No. Every circuit is built on a simulated breadboard, and the simulator checks each step as you go. When you want to build it for real, the same parts and wiring work on a real bench.

How long does DC motors and generators take?

About 5 hours: 7 lessons in 7 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

Where do I start?

With "Torque and current", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
