Source: https://mokxi.com/learn/path/dc-circuit-analysis
Updated: 2026-11-20

All paths

# DC circuit analysis

Solve resistor networks on paper and prove them on the meters: KVL, KCL, series-parallel reduction, Thevenin, Norton, superposition, maximum power, and a Wheatstone bridge you turn into a sensor.

Free 8 lessons 6 h 8 chapters 1,839 XP Electrical · Intermediate +150 XP

0 of 8 done

Start the course free KVL: every loop adds to zero Lesson plan for teachers

What you will build

## 0 projects, built step by step

8 lessons in 8 chapters, about 6 hours on a simulated breadboard. Free, in your browser, every step checked by the simulator.

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## KVL: the voltage law

Every loop adds to zero, with one source or two.

Open 236 XP

### KVL: every loop adds to zero

Kirchhoff's voltage law on a real loop: rises equal drops, any path between two points gives the same voltage, two sources aiding and opposing, and a resistor chosen so a drop lands on a target.

0 of 6 steps

Start What is in it

3 questions, graded as you go.

Chapter 2

## KCL: the current law

What goes into a node comes out, and a resistor solved from it.

Locked 236 XP

### KCL: what goes in comes out

Kirchhoff's current law at a node: an ammeter in the supply lead, branch currents read off each resistor, a new branch wired in, and a resistor solved so the supply draws a set current.

0 of 6 steps

3 questions, graded as you go.

Chapter 3

## Series-parallel reduction

Collapse a network to one resistor, and an R-2R ladder.

Locked 236 XP

### Series-parallel reduction

Collapse a network to one resistor on an ohmmeter: series adds, parallel is product over sum, equal parts halve, then an R-2R ladder that halves the voltage at every node.

0 of 6 steps

4 questions, graded as you go.

Chapter 4

## Thevenin

Voc, Isc and Rth, measured, built and proven.

Locked 236 XP

### Thevenin: one source, one resistor

Measure a network's open-circuit voltage, short-circuit current and resistance with the sources off, build its Thevenin equivalent, and prove the two give the same answer under any load.

0 of 6 steps

3 questions, graded as you go.

Chapter 5

## Norton

A current source, source transformation and compliance.

Locked 236 XP

### Norton: one current source, one resistor

The same network as a current source in parallel with a resistor: a bench supply in constant-current mode as the source, source transformation back to Thevenin, and what compliance voltage means.

0 of 6 steps

3 questions, graded as you go.

Chapter 6

## Superposition

One source at a time, and why power does not add.

Locked 236 XP

### Superposition: one source at a time

Two sources feeding one node: switch each off in turn, add the answers, predict a doubled and a reversed source by scaling, and see why power does not add the same way.

0 of 6 steps

4 questions, graded as you go.

Chapter 7

## Max power transfer

The matched load, and the efficiency it costs.

Locked 205 XP

### Maximum power transfer

Sweep a load across a source with internal resistance, find the peak where the load matches it, see the 50 percent efficiency that comes with it, and match a load to a real network's Thevenin resistance.

0 of 5 steps

3 questions, graded as you go.

Chapter 8

## Boss build

Solve, verify, balance and sense with a Wheatstone bridge.

Locked 218 XP

### Boss: solve and verify a bridge

A Wheatstone bridge solved on paper and proven on the meters: its output by two dividers, its Thevenin resistance with the source off, the current in a detector, then balance it and turn it into a sensor.

0 of 6 steps

3 questions, graded as you go.

Syllabus

## Every lesson in the course

All 8 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### KVL: the voltage law

- KVL: every loop adds to zero Kirchhoff's voltage law on a real loop: rises equal drops, any path between two points gives the same voltage, two sources aiding and opposing, and a resistor chosen so a drop lands on a target.

Chapter 2

### KCL: the current law

- KCL: what goes in comes out Kirchhoff's current law at a node: an ammeter in the supply lead, branch currents read off each resistor, a new branch wired in, and a resistor solved so the supply draws a set current.

Chapter 3

### Series-parallel reduction

- Series-parallel reduction Collapse a network to one resistor on an ohmmeter: series adds, parallel is product over sum, equal parts halve, then an R-2R ladder that halves the voltage at every node.

Chapter 4

### Thevenin

- Thevenin: one source, one resistor Measure a network's open-circuit voltage, short-circuit current and resistance with the sources off, build its Thevenin equivalent, and prove the two give the same answer under any load.

Chapter 5

### Norton

- Norton: one current source, one resistor The same network as a current source in parallel with a resistor: a bench supply in constant-current mode as the source, source transformation back to Thevenin, and what compliance voltage means.

Chapter 6

### Superposition

- Superposition: one source at a time Two sources feeding one node: switch each off in turn, add the answers, predict a doubled and a reversed source by scaling, and see why power does not add the same way.

Chapter 7

### Max power transfer

- Maximum power transfer Sweep a load across a source with internal resistance, find the peak where the load matches it, see the 50 percent efficiency that comes with it, and match a load to a real network's Thevenin resistance.

Chapter 8

### Boss build

- Boss: solve and verify a bridge A Wheatstone bridge solved on paper and proven on the meters: its output by two dividers, its Thevenin resistance with the source off, the current in a detector, then balance it and turn it into a sensor.

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About DC circuit analysis

Is DC circuit analysis free?

Yes. All 8 lessons of DC circuit analysis are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need any parts?

No. Every circuit is built on a simulated breadboard, and the simulator checks each step as you go. When you want to build it for real, the same parts and wiring work on a real bench.

How long does DC circuit analysis take?

About 6 hours: 8 lessons in 8 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

Where do I start?

With "KVL: every loop adds to zero", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
