Source: https://mokxi.com/learn/path/cyd-touch-apps
Updated: 2026-11-20

All paths

# Touch apps on the Cheap Yellow Display

Make touch-screen gadgets on the Cheap Yellow Display, an ESP32 with a screen built in: shapes, text and fonts, touch points, buttons on screen, a WiFi clock, and a space mission panel.

Cheap Yellow Display (ESP32-2432S028R) Free 7 lessons 5 h 4 chapters 1,800 XP Embedded engineering · Beginner +100 XP

0 of 7 done

Start the course free The board tour Lesson plan for teachers

What you will build

## 3 projects, built step by step

7 lessons in 4 chapters, about 5 hours on a simulated Cheap Yellow Display (ESP32-2432S028R). Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Drawing shapes

A night launch in pixels: coordinates where y grows down, lines, rectangles, circles and triangles, colors as RGB565 numbers, and a satellite animated by erasing and redrawing.
Open it in the simulator

Chapter 2 project

### Touch points

Where did the finger land? Read the XPT2046 touch chip, see its raw numbers, map them to pixels, draw a crosshair, and find out what calibration is by getting it wrong.
Open it in the simulator

Chapter 3 project

### A WiFi clock

Join WiFi, ask a time server for the time with NTP, add a time zone, and show it in seven-segment digits. The network is simulated, and the lesson says exactly what that means.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## The screen

The board, then shapes, colors and animation.

Open 175 XP

### The board tour

Meet the Cheap Yellow Display: an ESP32 glued to a touch screen. Where the screen, the touch film, the RGB LED and the free pins are wired, and a first hello on the screen.

0 of 6 steps

Start What is in it

Project Locked 350 XP

### Drawing shapes

A night launch in pixels: coordinates where y grows down, lines, rectangles, circles and triangles, colors as RGB565 numbers, and a satellite animated by erasing and redrawing.

0 of 6 steps

4 questions, graded as you go.

Chapter 2

## Words and touch

Fonts and text, and where a finger lands.

Locked 175 XP

### Text and fonts

Words and numbers on the screen: TFT_eSPI’s numbered fonts measured in pixels, the text datum that anchors a string, scaling, and a score that counts up without flicker.

0 of 6 steps

Project Locked 350 XP

### Touch points

Where did the finger land? Read the XPT2046 touch chip, see its raw numbers, map them to pixels, draw a crosshair, and find out what calibration is by getting it wrong.

0 of 6 steps

4 questions, graded as you go.

Chapter 3

## Real apps

Buttons that do things, and a clock that asks the internet.

Locked 175 XP

### Buttons on screen

Turn rectangles into buttons: a struct for each one, a hit test, a pressed look, and an action. Three buttons that light the board’s RGB LED red, green or blue.

0 of 6 steps

Project Locked 350 XP

### A WiFi clock

Join WiFi, ask a time server for the time with NTP, add a time zone, and show it in seven-segment digits. The network is simulated, and the lesson says exactly what that means.

0 of 6 steps

4 questions, graded as you go.

Chapter 4

## Project

A touch remote: a space mission panel.

Locked 225 XP

### Project: a space mission panel

A touch remote for a rocket: ARM, LAUNCH and ABORT buttons drive a safe, armed, countdown and liftoff state machine, light the LED, and send every command over serial.

0 of 8 steps

3 questions, graded as you go.

Syllabus

## Every lesson in the course

All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### The screen

- The board tour Meet the Cheap Yellow Display: an ESP32 glued to a touch screen. Where the screen, the touch film, the RGB LED and the free pins are wired, and a first hello on the screen.
- Drawing shapes A night launch in pixels: coordinates where y grows down, lines, rectangles, circles and triangles, colors as RGB565 numbers, and a satellite animated by erasing and redrawing.

Chapter 2

### Words and touch

- Text and fonts Words and numbers on the screen: TFT_eSPI’s numbered fonts measured in pixels, the text datum that anchors a string, scaling, and a score that counts up without flicker.
- Touch points Where did the finger land? Read the XPT2046 touch chip, see its raw numbers, map them to pixels, draw a crosshair, and find out what calibration is by getting it wrong.

Chapter 3

### Real apps

- Buttons on screen Turn rectangles into buttons: a struct for each one, a hit test, a pressed look, and an action. Three buttons that light the board’s RGB LED red, green or blue.
- A WiFi clock Join WiFi, ask a time server for the time with NTP, add a time zone, and show it in seven-segment digits. The network is simulated, and the lesson says exactly what that means.

Chapter 4

### Project

- Project: a space mission panel A touch remote for a rocket: ARM, LAUNCH and ABORT buttons drive a safe, armed, countdown and liftoff state machine, light the LED, and send every command over serial.

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Touch apps on the Cheap Yellow Display

Is Touch apps on the Cheap Yellow Display free?

Yes. All 7 lessons of Touch apps on the Cheap Yellow Display are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Cheap Yellow Display (ESP32-2432S028R)?

No. Every lesson runs on a simulated Cheap Yellow Display (ESP32-2432S028R) with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Touch apps on the Cheap Yellow Display take?

About 5 hours: 7 lessons in 4 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Drawing shapes, Touch points and A WiFi clock.

Where do I start?

With "The board tour", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
