Source: https://mokxi.com/learn/path/build-weather-balloon
Updated: 2026-11-20

All paths

# Build a high-altitude balloon tracker

Build the payload that rides a balloon to 30 km: GPS in flight mode, pressure and cold, LoRa tracking, a flight log, a cutdown and a whole simulated flight.

Arduino Uno R3 Free 6 lessons 6 h 3 chapters 2,432 XP Maker · Advanced +250 XP

0 of 6 done

Start the course free GPS altitude Build it as a kit Retails for about $48, free on Mokxi. Lesson plan for teachers

What you will build

## 3 projects, built step by step

6 lessons in 3 chapters, about 6 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Pressure and cold

Turn pressure into altitude with the three layers of the standard atmosphere, then find where the BMP280 runs out of range and why batteries hate the tropopause.
Open it in the simulator

Chapter 2 project

### Logging

Write GPS, pressure and temperature to a CSV file on microSD every two seconds, flush it so a dead battery loses nothing, and keep flying without a card.
Open it in the simulator

Chapter 3 project

### Project: a simulated flight

Fly a whole balloon flight, 300 times faster than life: launch, the tropopause, burst at 30 km, the parachute, landing, with telemetry, a log and a cutdown.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## How high, how cold

GPS altitude in flight mode, and the standard atmosphere.

Open 250 XP

### GPS altitude

Read altitude from a NEO-6M, and send the one UBX command every balloon needs: airborne mode, or the fix disappears at 12 km.

0 of 5 steps

Start What is in it

Project Locked 500 XP

### Pressure and cold

Turn pressure into altitude with the three layers of the standard atmosphere, then find where the BMP280 runs out of range and why batteries hate the tropopause.

0 of 5 steps

4 questions, graded as you go.

Chapter 2

## Track it, keep it

Sentences a stranger can check, and a log that misses nothing.

Locked 250 XP

### LoRa tracking

Send a UKHAS position sentence with a CRC16 every five seconds, so any receiver on the ground can check it and put the balloon on a map.

0 of 5 steps

Project Locked 500 XP

### Logging

Write GPS, pressure and temperature to a CSV file on microSD every two seconds, flush it so a dead battery loses nothing, and keep flying without a card.

0 of 5 steps

4 questions, graded as you go.

Chapter 3

## Fly it

A cutdown that never fires on the ground, then launch to landing.

Locked 326 XP

### A cutdown

Cut the balloon away on purpose with a MOSFET and a nichrome stand-in: on a ceiling, a geofence or a command, and never on the ground.

0 of 7 steps

Project Locked 606 XP

### Project: a simulated flight

Fly a whole balloon flight, 300 times faster than life: launch, the tropopause, burst at 30 km, the parachute, landing, with telemetry, a log and a cutdown.

0 of 7 steps

4 questions, graded as you go.

Syllabus

## Every lesson in the course

All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### How high, how cold

- GPS altitude Read altitude from a NEO-6M, and send the one UBX command every balloon needs: airborne mode, or the fix disappears at 12 km.
- Pressure and cold Turn pressure into altitude with the three layers of the standard atmosphere, then find where the BMP280 runs out of range and why batteries hate the tropopause.

Chapter 2

### Track it, keep it

- LoRa tracking Send a UKHAS position sentence with a CRC16 every five seconds, so any receiver on the ground can check it and put the balloon on a map.
- Logging Write GPS, pressure and temperature to a CSV file on microSD every two seconds, flush it so a dead battery loses nothing, and keep flying without a card.

Chapter 3

### Fly it

- A cutdown Cut the balloon away on purpose with a MOSFET and a nichrome stand-in: on a ceiling, a geofence or a command, and never on the ground.
- Project: a simulated flight Fly a whole balloon flight, 300 times faster than life: launch, the tropopause, burst at 30 km, the parachute, landing, with telemetry, a log and a cutdown.

Keep going

## The next course on your track

Build a high-altitude balloon tracker is part of the maker track, a ladder of courses from zero to expert.

Next course

### Build a home computer

From a CPU of NAND gates to a machine with a keyboard, a screen, a hex monitor and a BASIC that saves your programs.
Open the next course

Track

### Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

The kit for this course

### Weather Balloon Tracker Kit

An Uno, a LoRa module (SX1278, Ra-02) and a GPS module (NEO-6M): a tracker that logs a balloon flight and cuts it down on command.
Open the kit

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build a high-altitude balloon tracker

Is Build a high-altitude balloon tracker free?

Yes. All 6 lessons of Build a high-altitude balloon tracker are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build a high-altitude balloon tracker take?

About 6 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Pressure and cold, Logging and Project: a simulated flight.

Where do I start?

With "GPS altitude", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
