Source: https://mokxi.com/learn/path/build-thermal-camera
Updated: 2026-11-20

All paths

# Build a thermal camera

Build a thermal camera on an Uno: sixty-four heat pixels, color maps, bilinear upscaling, a hot spot finder and snapshots to microSD.

Arduino Uno R3 Free 6 lessons 5 h 3 chapters 1,653 XP Maker · Intermediate +150 XP

0 of 6 done

Start the course free 64 heat pixels Lesson plan for teachers

What you will build

## 2 projects, built step by step

6 lessons in 3 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Interpolation

Upscale 8x8 to 29x29 with bilinear interpolation: three blends of four pixels, and what it can and cannot show you.
Open it in the simulator

Chapter 2 project

### Snapshots

Save frames to a microSD card as CSV with names that never collide, list them, and handle a missing card without a crash.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Seeing heat

Sixty-four temperatures, turned into a picture and made smooth.

Open 205 XP

### 64 heat pixels

Read an AMG8833 Grid-EYE: sixty-four temperatures ten times a second, laid out row by row, with the hottest and coldest found in one pass.

0 of 5 steps

Start What is in it

Locked 205 XP

### Color maps

Turn temperatures into colors: a palette of our own, a gray one, and the choice every thermal camera makes between an automatic and a fixed range.

0 of 5 steps

Project Locked 410 XP

### Interpolation

Upscale 8x8 to 29x29 with bilinear interpolation: three blends of four pixels, and what it can and cannot show you.

0 of 5 steps

4 questions, graded as you go.

Chapter 2

## Measuring and keeping

Find the hot spot to better than a pixel, and save what you see.

Locked 205 XP

### Hot spot

Find the hot spot to better than a pixel with a weighted centroid, see how the frame edge pulls it, and raise an alarm over 50 C.

0 of 5 steps

Project Locked 410 XP

### Snapshots

Save frames to a microSD card as CSV with names that never collide, list them, and handle a missing card without a crash.

0 of 5 steps

4 questions, graded as you go.

Chapter 3

## Find the drafts

Put it all together into a tool that finds where a house leaks.

Locked 218 XP

### Project: find the drafts

Turn the camera into a draft finder: the room from the median, cold leaks and warm spots marked on a smooth picture, and snapshots for the record.

0 of 6 steps

3 questions, graded as you go.

Syllabus

## Every lesson in the course

All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Seeing heat

- 64 heat pixels Read an AMG8833 Grid-EYE: sixty-four temperatures ten times a second, laid out row by row, with the hottest and coldest found in one pass.
- Color maps Turn temperatures into colors: a palette of our own, a gray one, and the choice every thermal camera makes between an automatic and a fixed range.
- Interpolation Upscale 8x8 to 29x29 with bilinear interpolation: three blends of four pixels, and what it can and cannot show you.

Chapter 2

### Measuring and keeping

- Hot spot Find the hot spot to better than a pixel with a weighted centroid, see how the frame edge pulls it, and raise an alarm over 50 C.
- Snapshots Save frames to a microSD card as CSV with names that never collide, list them, and handle a missing card without a crash.

Chapter 3

### Find the drafts

- Project: find the drafts Turn the camera into a draft finder: the room from the median, cold leaks and warm spots marked on a smooth picture, and snapshots for the record.

Keep going

## The next course on your track

Build a thermal camera is part of the maker track, a ladder of courses from zero to expert.

Next course

### Build a tide clock

A wall clock for the sea: why tides come every 12 h 25 min, a servo hand from high to low, a DS3231 that keeps the time, and one high tide from your port’s table, with an honest look at why it is never for navigation.
Open the next course

Track

### Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build a thermal camera

Is Build a thermal camera free?

Yes. All 6 lessons of Build a thermal camera are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build a thermal camera take?

About 5 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Interpolation and Snapshots.

Where do I start?

With "64 heat pixels", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
