Source: https://mokxi.com/learn/path/build-solar-tracker
Updated: 2026-11-20

All paths

# Build a solar tracker

Light sensors and servos aim a panel, an INA219 measures it, and a fair experiment compares tracked with fixed.

Arduino Uno R3 Free 3 lessons 2 h 2 chapters 696 XP Maker · Intermediate +150 XP

0 of 3 done

Start the course free Four eyes and two servos Lesson plan for teachers

What you will build

## One project, built step by step

3 lessons in 2 chapters, about 2 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Measure what the panel makes

Add a small solar panel, a load and an INA219, and read real volts, milliamps and milliwatts. Why a panel is a current source, and how a shunt measures current.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Aim and measure

Steer two servos with four light sensors, then read real power off the panel.

Open 174 XP

### Four eyes and two servos

Four light sensors in a cross steer a pan and tilt pair toward the brighter side. How a voltage divider turns light into a number, and how comparing two numbers aims a panel.

0 of 4 steps

Start What is in it

Project Locked 348 XP

### Measure what the panel makes

Add a small solar panel, a load and an INA219, and read real volts, milliamps and milliwatts. Why a panel is a current source, and how a shunt measures current.

0 of 4 steps

Chapter 2

## The experiment

Compare tracked with fixed using measured energy, and nothing else.

Locked 174 XP

### Tracked against fixed, honestly

Run a fair experiment: twenty seconds tracking, twenty seconds parked, again and again, adding up the energy each way. Only measured numbers, never invented ones.

0 of 4 steps

Syllabus

## Every lesson in the course

All 3 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Aim and measure

- Four eyes and two servos Four light sensors in a cross steer a pan and tilt pair toward the brighter side. How a voltage divider turns light into a number, and how comparing two numbers aims a panel.
- Measure what the panel makes Add a small solar panel, a load and an INA219, and read real volts, milliamps and milliwatts. Why a panel is a current source, and how a shunt measures current.

Chapter 2

### The experiment

- Tracked against fixed, honestly Run a fair experiment: twenty seconds tracking, twenty seconds parked, again and again, adding up the energy each way. Only measured numbers, never invented ones.

Keep going

## The next course on your track

Build a solar tracker is part of the maker track, a ladder of courses from zero to expert.

Next course

### Build an arc reactor and helmet

An arc reactor style chest light and a moving faceplate in three builds: the glow, the helmet, then the whole suit.
Open the next course

Track

### Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build a solar tracker

Is Build a solar tracker free?

Yes. All 3 lessons of Build a solar tracker are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build a solar tracker take?

About 2 hours: 3 lessons in 2 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Measure what the panel makes.

Where do I start?

With "Four eyes and two servos", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
