Source: https://mokxi.com/learn/path/build-smart-bird-feeder
Updated: 2026-11-20

All paths

# Build a smart bird feeder

Build a feeder that keeps a diary: motion, a scale that weighs every visitor, a squirrel guard, a visit log and a daily report.

Arduino Uno R3 Free 6 lessons 5 h 3 chapters 1,530 XP Maker · Intermediate +150 XP

0 of 6 done

Start the course free Visit detection Lesson plan for teachers

What you will build

## 3 projects, built step by step

6 lessons in 3 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Seed weight

Hang the feeder from a load cell: the seed left in the hopper, and every visitor weighed and sized as it lands.
Open it in the simulator

Chapter 2 project

### Logging visits

Write every visit to VISITS.CSV on microSD with the time from a DS3231: when, how heavy, what size, and how long it stayed.
Open it in the simulator

Chapter 3 project

### Project: a bird diary

The whole feeder: motion, landings and departures with times and weights, a log on the card, and the evening report.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Who came

Motion, and a scale that weighs every visitor.

Open 174 XP

### Visit detection

Count visits with a PIR motion sensor: one per rising edge, held for a few seconds, so a bird hopping about is one visit and not twenty.

0 of 4 steps

Start What is in it

Project Locked 348 XP

### Seed weight

Hang the feeder from a load cell: the seed left in the hopper, and every visitor weighed and sized as it lands.

0 of 4 steps

4 questions, graded as you go.

Chapter 2

## Guard and log

Keep the squirrels out, and write every visit down.

Locked 174 XP

### Squirrel guard

Shut a servo gate over the seed when anything over 300 g sits on the perch, and open it again only after 10 seconds clear.

0 of 4 steps

Project Locked 348 XP

### Logging visits

Write every visit to VISITS.CSV on microSD with the time from a DS3231: when, how heavy, what size, and how long it stayed.

0 of 4 steps

3 questions, graded as you go.

Chapter 3

## The diary

An evening report, then the whole feeder.

Locked 174 XP

### Daily report

At 20:00 every evening, sum up the day: visits by size, seed eaten, the share left, the busiest hour and a refill reminder.

0 of 4 steps

Project Locked 312 XP

### Project: a bird diary

The whole feeder: motion, landings and departures with times and weights, a log on the card, and the evening report.

0 of 4 steps

3 questions, graded as you go.

Syllabus

## Every lesson in the course

All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Who came

- Visit detection Count visits with a PIR motion sensor: one per rising edge, held for a few seconds, so a bird hopping about is one visit and not twenty.
- Seed weight Hang the feeder from a load cell: the seed left in the hopper, and every visitor weighed and sized as it lands.

Chapter 2

### Guard and log

- Squirrel guard Shut a servo gate over the seed when anything over 300 g sits on the perch, and open it again only after 10 seconds clear.
- Logging visits Write every visit to VISITS.CSV on microSD with the time from a DS3231: when, how heavy, what size, and how long it stayed.

Chapter 3

### The diary

- Daily report At 20:00 every evening, sum up the day: visits by size, seed eaten, the share left, the busiest hour and a refill reminder.
- Project: a bird diary The whole feeder: motion, landings and departures with times and weights, a log on the card, and the evening report.

Keep going

## The next course on your track

Build a smart bird feeder is part of the maker track, a ladder of courses from zero to expert.

Next course

### Build a smart lock

A keypad with a constant-time check, RFID, a fingerprint, a relay-driven bolt, an EEPROM log and a three-factor door, with honest security notes.
Open the next course

Track

### Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build a smart bird feeder

Is Build a smart bird feeder free?

Yes. All 6 lessons of Build a smart bird feeder are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build a smart bird feeder take?

About 5 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Seed weight, Logging visits and Project: a bird diary.

Where do I start?

With "Visit detection", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
