Source: https://mokxi.com/learn/path/build-smart-beehive
Updated: 2026-11-20

All paths

# Build a smart beehive

Build a hive monitor beekeepers can trust: weight trends, brood temperature, hive sound, a swarm watch and LoRa reports.

Arduino Uno R3 Free 6 lessons 5 h 3 chapters 1,530 XP Maker · Intermediate +150 XP

0 of 6 done

Start the course free Hive weight Lesson plan for teachers

What you will build

## 3 projects, built step by step

6 lessons in 3 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Temperature and humidity

Put an SHT31 in the brood box and read the colony's own thermostat: brood held near 34.5 C, whatever the weather.
Open it in the simulator

Chapter 2 project

### Swarm signs

Combine two clues into one alarm: a weight drop of 1.5 kg in ten minutes, and piping heard in the last half hour.
Open it in the simulator

Chapter 3 project

### Project: a season of data

The whole monitor: weight, brood climate, sound, the swarm watch and LoRa reports with the season so far.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Read the hive

Weight and the brood nest's climate.

Open 174 XP

### Hive weight

Weigh a whole beehive with load cells and an HX711, and read the trend: a nectar flow puts weight on, a swarm takes it off in minutes.

0 of 4 steps

Start What is in it

Project Locked 348 XP

### Temperature and humidity

Put an SHT31 in the brood box and read the colony's own thermostat: brood held near 34.5 C, whatever the weather.

0 of 4 steps

4 questions, graded as you go.

Chapter 2

## Listen for a swarm

Hive sound, and an alarm that needs two clues.

Locked 174 XP

### Hive sound

Listen to a colony: the pitch from zero crossings, the level as RMS, and a careful watch on the band where young queens pipe.

0 of 4 steps

Project Locked 348 XP

### Swarm signs

Combine two clues into one alarm: a weight drop of 1.5 kg in ten minutes, and piping heard in the last half hour.

0 of 4 steps

3 questions, graded as you go.

Chapter 3

## Report the season

Ten bytes over LoRa, then a season of data.

Locked 174 XP

### LoRa reports

Send the hive's state home in ten bytes over LoRa: weight, brood temperature, humidity, sound and a report number.

0 of 4 steps

Project Locked 312 XP

### Project: a season of data

The whole monitor: weight, brood climate, sound, the swarm watch and LoRa reports with the season so far.

0 of 4 steps

3 questions, graded as you go.

Syllabus

## Every lesson in the course

All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Read the hive

- Hive weight Weigh a whole beehive with load cells and an HX711, and read the trend: a nectar flow puts weight on, a swarm takes it off in minutes.
- Temperature and humidity Put an SHT31 in the brood box and read the colony's own thermostat: brood held near 34.5 C, whatever the weather.

Chapter 2

### Listen for a swarm

- Hive sound Listen to a colony: the pitch from zero crossings, the level as RMS, and a careful watch on the band where young queens pipe.
- Swarm signs Combine two clues into one alarm: a weight drop of 1.5 kg in ten minutes, and piping heard in the last half hour.

Chapter 3

### Report the season

- LoRa reports Send the hive's state home in ten bytes over LoRa: weight, brood temperature, humidity, sound and a report number.
- Project: a season of data The whole monitor: weight, brood climate, sound, the swarm watch and LoRa reports with the season so far.

Keep going

## The next course on your track

Build a smart beehive is part of the maker track, a ladder of courses from zero to expert.

Next course

### Build a smart bird feeder

Build a feeder that keeps a diary: motion, a scale that weighs every visitor, a squirrel guard, a visit log and a daily report.
Open the next course

Track

### Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build a smart beehive

Is Build a smart beehive free?

Yes. All 6 lessons of Build a smart beehive are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build a smart beehive take?

About 5 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Temperature and humidity, Swarm signs and Project: a season of data.

Where do I start?

With "Hive weight", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
