Source: https://mokxi.com/learn/path/build-reaction-pods
Updated: 2026-11-20

All paths

# Build reaction training pods

Touch pads, LED rings and a wireless pod on nRF24L01: random drills timed to the millisecond, scores and a record that survives the night.

Arduino Uno R3 Free 6 lessons 5 h 2 chapters 1,480 XP Maker · Intermediate +150 XP

0 of 6 done

Start the course free Touch pads Build it as a kit Retails for about $67, free on Mokxi. Lesson plan for teachers

What you will build

## 2 projects, built step by step

6 lessons in 2 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Pods talking

Link a wireless pod with nRF24L01 radios: the hub tells pod C to light, pod C times the touch on its own clock and radios the result back.
Open it in the simulator

Chapter 2 project

### Project: a training session

Run real training sessions on the three pods, see what a session of misses scores, then make the drills your own and build pods for a gym.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Pods

Touch pads, colors and a pod that talks by radio.

Open 205 XP

### Touch pads

Read TTP223 touch pads that feel a finger through plastic, with their half-second start and 60 ms answer, and light each pod's ring under a finger.

0 of 5 steps

Start What is in it

Locked 174 XP

### Lights

Make the rings speak in colors: dim blue for waiting, green for go, red for a miss, with a touch on the green pod putting it out.

0 of 4 steps

Project Locked 410 XP

### Pods talking

Link a wireless pod with nRF24L01 radios: the hub tells pod C to light, pod C times the touch on its own clock and radios the result back.

0 of 5 steps

3 questions, graded as you go.

Chapter 2

## Training

Random drills, fair scores and a full training session.

Locked 205 XP

### Drills

Run a drill of ten lights in random order after random gaps across all three pods, and time every reaction to the millisecond.

0 of 5 steps

Locked 174 XP

### Scores

Score a drill fairly: hits, misses counted as the full timeout, the average and the best reaction, a rating, and a record kept in EEPROM.

0 of 4 steps

Project Locked 312 XP

### Project: a training session

Run real training sessions on the three pods, see what a session of misses scores, then make the drills your own and build pods for a gym.

0 of 4 steps

4 questions, graded as you go.

Syllabus

## Every lesson in the course

All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Pods

- Touch pads Read TTP223 touch pads that feel a finger through plastic, with their half-second start and 60 ms answer, and light each pod's ring under a finger.
- Lights Make the rings speak in colors: dim blue for waiting, green for go, red for a miss, with a touch on the green pod putting it out.
- Pods talking Link a wireless pod with nRF24L01 radios: the hub tells pod C to light, pod C times the touch on its own clock and radios the result back.

Chapter 2

### Training

- Drills Run a drill of ten lights in random order after random gaps across all three pods, and time every reaction to the millisecond.
- Scores Score a drill fairly: hits, misses counted as the full timeout, the average and the best reaction, a rating, and a record kept in EEPROM.
- Project: a training session Run real training sessions on the three pods, see what a session of misses scores, then make the drills your own and build pods for a gym.

Keep going

## The next course on your track

Build reaction training pods is part of the maker track, a ladder of courses from zero to expert.

Next course

### Build receipt printer gadgets

Drive a thermal receipt printer from an Uno: ESC/POS bytes, 1-bit bitmaps, a fortune button, a to-do list, ASCII art and a daily brief.
Open the next course

Track

### Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

The kit for this course

### Reaction Pods Kit

An Uno, a touch sensor (TTP223), addressable RGB LEDs and a 2.4 GHz radio (nRF24L01+): three pods that test and time your reactions.
Open the kit

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build reaction training pods

Is Build reaction training pods free?

Yes. All 6 lessons of Build reaction training pods are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build reaction training pods take?

About 5 hours: 6 lessons in 2 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Pods talking and Project: a training session.

Where do I start?

With "Touch pads", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
