Source: https://mokxi.com/learn/path/build-launch-controller
Updated: 2026-11-20

All paths

# Build a rocket launch controller

Build the launch box a club rocket range runs on: a safety key, an arm code, a continuity check, a countdown, every abort and a misfire lockout.

Arduino Uno R3 Free 6 lessons 6 h 3 chapters 1,995 XP Maker · Intermediate +150 XP

0 of 6 done

Start the course free Arming keys Build it as a kit Retails for about $40, free on Mokxi. Lesson plan for teachers

What you will build

## 3 projects, built step by step

6 lessons in 3 chapters, about 6 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Continuity check

Prove an igniter is in the clips and unbroken with a sense current about a thousand times too small to light it: 5 V, a 4.7k resistor and an analog pin.
Open it in the simulator

Chapter 2 project

### Abort

Three ways to stop a launch, each named on the monitor: the abort key, the safety key and a lost igniter. Then make sure the only way back is a fresh start.
Open it in the simulator

Chapter 3 project

### Project: a club launch box

Run a launch day from the table: check the pad, arm with the club code, count down, fly two rockets in a row and read back the log. Then make the box your own.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Safe, then armed

A key, a code, and proof the igniter is there.

Open 205 XP

### Arming keys

Two things arm a launch box, and they cannot happen together by accident: a safety key and a code. Wire the key so it cuts the fire relay in hardware, then read it in software too.

0 of 5 steps

Start What is in it

Project Locked 472 XP

### Continuity check

Prove an igniter is in the clips and unbroken with a sense current about a thousand times too small to light it: 5 V, a 4.7k resistor and an analog pin.

0 of 6 steps

4 questions, graded as you go.

Chapter 2

## Count down, or stop

Five, four, three, two, one, and every way to say no.

Locked 236 XP

### Countdown

Press A and count down from five with a beep a second on the TM1637, then pull the relay in for exactly one second and watch the igniter glow.

0 of 6 steps

Project Locked 410 XP

### Abort

Three ways to stop a launch, each named on the monitor: the abort key, the safety key and a lost igniter. Then make sure the only way back is a fresh start.

0 of 5 steps

4 questions, graded as you go.

Chapter 3

## On the range

Misfires, the 60 second rule, and a full launch day.

Locked 236 XP

### Range safety

The rules a real range runs on, built into the box: a power-up self-test, no arming with the key left in, a liftoff check, and the 60 second misfire wait.

0 of 6 steps

Project Locked 436 XP

### Project: a club launch box

Run a launch day from the table: check the pad, arm with the club code, count down, fly two rockets in a row and read back the log. Then make the box your own.

0 of 6 steps

4 questions, graded as you go.

Certificate

## A certificate when you finish

Finish every lesson and pass every chapter quiz and Mokxi issues a certificate with your name, verified on its own page.

Certificate No. MXC0-URSE-0001

Certificate of Completion

This is to certify that

Your Name

has successfully completed the course

Build a rocket launch controller

Covering Safe, then armed, Count down, or stop and On the range.

6 lessons · about 6 hours of study

Dane Dane, Founder, Mokxi Issued November 17, 2026

Verify this certificate mokxi.com/cert/MXC0URSE0001

Preview

Certificate

### Earn your certificate

- Your name and a unique ID Printed on a landscape certificate that is yours to keep.
- Verified by Mokxi A QR code and a public page anyone can check it against.
- Add to LinkedIn One click fills in LinkedIn’s certification form.
- Download as PDF Print it or attach it to a CV or an application.

Finish the course and earn a verifiable certificate with your name, a QR code and a link for LinkedIn. Certificates come with Pro, and the 7-day trial is free.

Earn your certificate

Syllabus

## Every lesson in the course

All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Safe, then armed

- Arming keys Two things arm a launch box, and they cannot happen together by accident: a safety key and a code. Wire the key so it cuts the fire relay in hardware, then read it in software too.
- Continuity check Prove an igniter is in the clips and unbroken with a sense current about a thousand times too small to light it: 5 V, a 4.7k resistor and an analog pin.

Chapter 2

### Count down, or stop

- Countdown Press A and count down from five with a beep a second on the TM1637, then pull the relay in for exactly one second and watch the igniter glow.
- Abort Three ways to stop a launch, each named on the monitor: the abort key, the safety key and a lost igniter. Then make sure the only way back is a fresh start.

Chapter 3

### On the range

- Range safety The rules a real range runs on, built into the box: a power-up self-test, no arming with the key left in, a liftoff check, and the 60 second misfire wait.
- Project: a club launch box Run a launch day from the table: check the pad, arm with the club code, count down, fly two rockets in a row and read back the log. Then make the box your own.

Keep going

## The next course on your track

Build a rocket launch controller is part of the maker track, a ladder of courses from zero to expert.

Next course

### Build a rotary phone jukebox

Read a rotary dial pulse by pulse, add a hook switch and a DFPlayer, and turn an old phone into a jukebox that rings you back.
Open the next course

Track

### Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

The kit for this course

### Rocket Launch Controller Kit

An Uno, a keypad (4x4), a four-digit display (TM1637), a relay module and a filament lamp: a launch box that arms, checks and counts down.
Open the kit

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build a rocket launch controller

Is Build a rocket launch controller free?

Yes. All 6 lessons of Build a rocket launch controller are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build a rocket launch controller take?

About 6 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Continuity check, Abort and Project: a club launch box.

Where do I start?

With "Arming keys", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
