Source: https://mokxi.com/learn/path/build-guitar-effects-pedal
Updated: 2026-11-20

All paths

# Build a digital effects pedal

A guitar pedal on an Uno: bias and sampling, drive, a ring-buffer delay, tremolo, a swept wah, latency and a two-effect chain.

Arduino Uno R3 Free 7 lessons 7 h 3 chapters 2,187 XP Maker · Advanced +250 XP

0 of 7 done

Start the course free Audio in and out Lesson plan for teachers

What you will build

## 3 projects, built step by step

7 lessons in 3 chapters, about 7 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Gain and clipping

Overdrive from arithmetic: multiply by the knob, then clip hard against the rails or soft through a curve, and count how much of the wave goes flat.
Open it in the simulator

Chapter 2 project

### A wah filter

A swept band-pass filter: a state-variable filter in fixed point, its center on the knob from 200 Hz to 2 kHz, an LFO for auto-wah, and Q for the sharpness.
Open it in the simulator

Chapter 3 project

### Project: a two-effect pedal

Chain drive and tremolo, switch the pedal in and out with a footswitch, swap the order and hear why it matters, and share your settings.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## The signal

Audio in, audio out, and the gain that turns it into drive.

Open 227 XP

### Audio in and out

Get a guitar signal into a 0 to 5 V ADC: a coupling capacitor and a bias at mid-rail, a sample every 64 us, and PWM back out to a piezo.

0 of 5 steps

Start What is in it

Project Locked 454 XP

### Gain and clipping

Overdrive from arithmetic: multiply by the knob, then clip hard against the rails or soft through a curve, and count how much of the wave goes flat.

0 of 5 steps

4 questions, graded as you go.

Chapter 2

## Effects

Echo from memory, tremolo from an LFO, wah from a filter.

Locked 227 XP

### Delay

An echo from a ring buffer, honest about the Uno's 2 KB: 1,280 bytes hold 81 ms, feedback makes repeats, and MUTE measures the tail.

0 of 5 steps

Locked 212 XP

### Tremolo

Make the volume pulse with a low-frequency oscillator: set its rate and depth, and switch it from a smooth triangle to a hard square chop.

0 of 4 steps

Project Locked 424 XP

### A wah filter

A swept band-pass filter: a state-variable filter in fixed point, its center on the knob from 200 Hz to 2 kHz, an LFO for auto-wah, and Q for the sharpness.

0 of 4 steps

4 questions, graded as you go.

Chapter 3

## The pedal

How late it is, then a chain of your own.

Locked 189 XP

### Latency

Measure how late the sound comes out: under a sample working sample by sample, and a whole block when a processor works in blocks.

0 of 4 steps

Project Locked 454 XP

### Project: a two-effect pedal

Chain drive and tremolo, switch the pedal in and out with a footswitch, swap the order and hear why it matters, and share your settings.

0 of 5 steps

3 questions, graded as you go.

Syllabus

## Every lesson in the course

All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### The signal

- Audio in and out Get a guitar signal into a 0 to 5 V ADC: a coupling capacitor and a bias at mid-rail, a sample every 64 us, and PWM back out to a piezo.
- Gain and clipping Overdrive from arithmetic: multiply by the knob, then clip hard against the rails or soft through a curve, and count how much of the wave goes flat.

Chapter 2

### Effects

- Delay An echo from a ring buffer, honest about the Uno's 2 KB: 1,280 bytes hold 81 ms, feedback makes repeats, and MUTE measures the tail.
- Tremolo Make the volume pulse with a low-frequency oscillator: set its rate and depth, and switch it from a smooth triangle to a hard square chop.
- A wah filter A swept band-pass filter: a state-variable filter in fixed point, its center on the knob from 200 Hz to 2 kHz, an LFO for auto-wah, and Q for the sharpness.

Chapter 3

### The pedal

- Latency Measure how late the sound comes out: under a sample working sample by sample, and a whole block when a processor works in blocks.
- Project: a two-effect pedal Chain drive and tremolo, switch the pedal in and out with a footswitch, swap the order and hear why it matters, and share your settings.

Keep going

## The next course on your track

Build a digital effects pedal is part of the maker track, a ladder of courses from zero to expert.

Next course

### Build a handheld game console

Wire a color screen, buttons and sound to an ESP32-C3, one working step at a time, and finish with three games you can play.
Open the next course

Track

### Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build a digital effects pedal

Is Build a digital effects pedal free?

Yes. All 7 lessons of Build a digital effects pedal are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build a digital effects pedal take?

About 7 hours: 7 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Gain and clipping, A wah filter and Project: a two-effect pedal.

Where do I start?

With "Audio in and out", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
