Source: https://mokxi.com/learn/path/build-geiger-logger
Updated: 2026-11-20

All paths

# Build a radiation logger

Count a Geiger tube with interrupts, read background with its uncertainty, turn counts into dose, and keep a diary on microSD.

Arduino Uno R3 Free 6 lessons 5 h 3 chapters 1,529 XP Maker · Intermediate +150 XP

0 of 6 done

Start the course free Counts per minute Lesson plan for teachers

What you will build

## 2 projects, built step by step

6 lessons in 3 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Background

Measure the radiation that is always there with a running minute, and read every number with its Poisson uncertainty.
Open it in the simulator

Chapter 2 project

### Clicks and alarms

Make every count a click you can hear, mute it, and raise an alarm over 1 uSv/h that does not cry wolf at random bursts.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Counting the invisible

Pulses, interrupts, background and the square root of N.

Open 205 XP

### Counts per minute

Count the pulses of a Geiger tube with an interrupt, see what polling would miss, and meet the square root that rules every count.

0 of 5 steps

Start What is in it

Project Locked 348 XP

### Background

Measure the radiation that is always there with a running minute, and read every number with its Poisson uncertainty.

0 of 4 steps

4 questions, graded as you go.

Chapter 2

## From counts to a meter

Dose math, a log on microSD, and clicks and alarms.

Locked 174 XP

### Dose math

Turn counts per minute into microsieverts an hour with the tube's factor, see how approximate that is, and add it up over a year.

0 of 4 steps

Locked 174 XP

### Logging

Write the raw counts to microSD every 30 seconds, safely, and read them back. Rates can be worked out later; counts cannot be recovered from rates.

0 of 4 steps

Project Locked 410 XP

### Clicks and alarms

Make every count a click you can hear, mute it, and raise an alarm over 1 uSv/h that does not cry wolf at random bursts.

0 of 5 steps

4 questions, graded as you go.

Chapter 3

## A radiation diary

Put it all together into a logger worth carrying.

Locked 218 XP

### Project: a radiation diary

Put it all together: a counter that clicks, alarms, totals your dose and keeps a diary of the places you took it.

0 of 6 steps

3 questions, graded as you go.

Syllabus

## Every lesson in the course

All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Counting the invisible

- Counts per minute Count the pulses of a Geiger tube with an interrupt, see what polling would miss, and meet the square root that rules every count.
- Background Measure the radiation that is always there with a running minute, and read every number with its Poisson uncertainty.

Chapter 2

### From counts to a meter

- Dose math Turn counts per minute into microsieverts an hour with the tube's factor, see how approximate that is, and add it up over a year.
- Logging Write the raw counts to microSD every 30 seconds, safely, and read them back. Rates can be worked out later; counts cannot be recovered from rates.
- Clicks and alarms Make every count a click you can hear, mute it, and raise an alarm over 1 uSv/h that does not cry wolf at random bursts.

Chapter 3

### A radiation diary

- Project: a radiation diary Put it all together: a counter that clicks, alarms, totals your dose and keeps a diary of the places you took it.

Keep going

## The next course on your track

Build a radiation logger is part of the maker track, a ladder of courses from zero to expert.

Next course

### Build a reflow oven controller

Build the low-voltage side of a reflow oven: a thermocouple, an SSR, solder profiles, PID tracking and the safety cutoffs that make it trustworthy.
Open the next course

Track

### Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build a radiation logger

Is Build a radiation logger free?

Yes. All 6 lessons of Build a radiation logger are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build a radiation logger take?

About 5 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Background and Clicks and alarms.

Where do I start?

With "Counts per minute", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
