Source: https://mokxi.com/learn/path/build-escape-room-network
Updated: 2026-11-20

All paths

# Build a networked escape room

Three Unos on nRF24L01 radios run a three-room escape game: addresses, acks, retries, state sync, hints and resets from a game master panel.

Arduino Uno R3 Free 6 lessons 6 h 3 chapters 1,977 XP Maker · Advanced +250 XP

0 of 6 done

Start the course free Puzzle nodes Lesson plan for teachers

What you will build

## 2 projects, built step by step

6 lessons in 3 chapters, about 6 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Messages between nodes

Eight bytes on the air: addresses, a message format of your own, hardware acks, retries on top, and message numbers that catch repeats.
Open it in the simulator

Chapter 2 project

### Resets

Put every room back for the next group with one command, check every node acknowledged it, and confirm with a ping.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Nodes and messages

Puzzles that know their answers, and the packets that carry the news.

Open 250 XP

### Puzzle nodes

Meet the network: a game master and two puzzle nodes, a keypad code in the Lab, a key card in the Vault and a hidden magnet in the Study.

0 of 5 steps

Start What is in it

Project Locked 500 XP

### Messages between nodes

Eight bytes on the air: addresses, a message format of your own, hardware acks, retries on top, and message numbers that catch repeats.

0 of 5 steps

4 questions, graded as you go.

Chapter 2

## The game master

A panel that knows every room, sends hints and puts it all back.

Locked 250 XP

### A game master panel

A table of what the game master believes about every room, lights that show it, and a ping that makes the belief match the truth.

0 of 5 steps

Locked 250 XP

### Hints

Send hints across the network to the right room, count them, and make each one a little more direct than the last.

0 of 5 steps

Project Locked 424 XP

### Resets

Put every room back for the next group with one command, check every node acknowledged it, and confirm with a ping.

0 of 4 steps

4 questions, graded as you go.

Chapter 3

## A three-room game

Rooms in order, a clock, and an escape worth sharing.

Locked 303 XP

### Project: a three-room game

The whole game: rooms that unlock in order, a 60-minute clock, hints that cost time, and an escape time at the end.

0 of 7 steps

3 questions, graded as you go.

Syllabus

## Every lesson in the course

All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Nodes and messages

- Puzzle nodes Meet the network: a game master and two puzzle nodes, a keypad code in the Lab, a key card in the Vault and a hidden magnet in the Study.
- Messages between nodes Eight bytes on the air: addresses, a message format of your own, hardware acks, retries on top, and message numbers that catch repeats.

Chapter 2

### The game master

- A game master panel A table of what the game master believes about every room, lights that show it, and a ping that makes the belief match the truth.
- Hints Send hints across the network to the right room, count them, and make each one a little more direct than the last.
- Resets Put every room back for the next group with one command, check every node acknowledged it, and confirm with a ping.

Chapter 3

### A three-room game

- Project: a three-room game The whole game: rooms that unlock in order, a 60-minute clock, hints that cost time, and an escape time at the end.

Keep going

## The next course on your track

Build a networked escape room is part of the maker track, a ladder of courses from zero to expert.

Next course

### Build a parking assistant

A garage stop light from scratch: an ultrasonic sensor that measures with sound, LEDs that turn green, yellow and red, smoothing for messy echoes, sleep when the car is parked, and notes for mounting it for real.
Open the next course

Track

### Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build a networked escape room

Is Build a networked escape room free?

Yes. All 6 lessons of Build a networked escape room are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build a networked escape room take?

About 6 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Messages between nodes and Resets.

Where do I start?

With "Puzzle nodes", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
