Source: https://mokxi.com/learn/path/build-cubesat
Updated: 2026-11-20

All paths

# Build a CubeSat flight computer

Bring up a 1U CubeSat on the bench: sensors, a real power budget, CCSDS telemetry, beacons, safe mode and a ground pass.

Arduino Uno R3 Free 7 lessons 7 h 3 chapters 2,423 XP Maker · Advanced +250 XP

0 of 7 done

Start the course free Mission design Build it as a kit Retails for about $88, free on Mokxi. Lesson plan for teachers

What you will build

## 3 projects, built step by step

7 lessons in 3 chapters, about 7 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Power budget

Measure a real solar and battery circuit with an INA219, watch an eclipse, see why the blocking diode is there, and work out whether the satellite survives an orbit.
Open it in the simulator

Chapter 2 project

### Beacon mode

Keep the 45 minutes of radio silence after deployment, unfold the antenna, beacon a callsign and health, and answer a ping from the ground.
Open it in the simulator

Chapter 3 project

### Project: a ground pass

Fly the whole mission: deploy, beacon, log every ten minutes, ride out an eclipse in safe mode, then make contact and download the log as a pass report.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## The spacecraft

An orbit, the sensors that watch the cube, and the power that keeps it alive.

Open 250 XP

### Mission design

Wake a CubeSat flight computer, find its sensors and radio on the bus, and work out an orbit from Kepler: period, speed, eclipse and how long it stays up.

0 of 5 steps

Start What is in it

Locked 250 XP

### Sensors

Read housekeeping register by register: the temperature inside the cube against its limits, Earth's magnetic field, and the spin that says it is tumbling.

0 of 5 steps

Project Locked 500 XP

### Power budget

Measure a real solar and battery circuit with an INA219, watch an eclipse, see why the blocking diode is there, and work out whether the satellite survives an orbit.

0 of 5 steps

5 questions, graded as you go.

Chapter 2

## Talking to the ground

Frames with a sync marker and a CRC, then a beacon the ground can hear.

Locked 288 XP

### Telemetry frames

Pack housekeeping into CCSDS-style frames with a sync marker, a sequence count and a CRC-16, send them down, and watch the ground station catch a flipped bit.

0 of 6 steps

Project Locked 454 XP

### Beacon mode

Keep the 45 minutes of radio silence after deployment, unfold the antenna, beacon a callsign and health, and answer a ping from the ground.

0 of 5 steps

4 questions, graded as you go.

Chapter 3

## Flight

Survive an eclipse in safe mode, then bring the log down in a pass.

Locked 227 XP

### Safe mode

Fly into a long eclipse until the battery sags under 3.50 V, shed the payload, and come back only above 3.80 V: a mode machine with hysteresis.

0 of 5 steps

Project Locked 454 XP

### Project: a ground pass

Fly the whole mission: deploy, beacon, log every ten minutes, ride out an eclipse in safe mode, then make contact and download the log as a pass report.

0 of 5 steps

3 questions, graded as you go.

Syllabus

## Every lesson in the course

All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### The spacecraft

- Mission design Wake a CubeSat flight computer, find its sensors and radio on the bus, and work out an orbit from Kepler: period, speed, eclipse and how long it stays up.
- Sensors Read housekeeping register by register: the temperature inside the cube against its limits, Earth's magnetic field, and the spin that says it is tumbling.
- Power budget Measure a real solar and battery circuit with an INA219, watch an eclipse, see why the blocking diode is there, and work out whether the satellite survives an orbit.

Chapter 2

### Talking to the ground

- Telemetry frames Pack housekeeping into CCSDS-style frames with a sync marker, a sequence count and a CRC-16, send them down, and watch the ground station catch a flipped bit.
- Beacon mode Keep the 45 minutes of radio silence after deployment, unfold the antenna, beacon a callsign and health, and answer a ping from the ground.

Chapter 3

### Flight

- Safe mode Fly into a long eclipse until the battery sags under 3.50 V, shed the payload, and come back only above 3.80 V: a mode machine with hysteresis.
- Project: a ground pass Fly the whole mission: deploy, beacon, log every ten minutes, ride out an eclipse in safe mode, then make contact and download the log as a pass report.

Keep going

## The next course on your track

Build a CubeSat flight computer is part of the maker track, a ladder of courses from zero to expert.

Next course

### Build a digital effects pedal

A guitar pedal on an Uno: bias and sampling, drive, a ring-buffer delay, tremolo, a swept wah, latency and a two-effect chain.
Open the next course

Track

### Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

The kit for this course

### Small Satellite Flight Computer Kit

An Uno and a LoRa module (SX1278, Ra-02): a satellite that beacons, sleeps and survives an eclipse.
Open the kit

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build a CubeSat flight computer

Is Build a CubeSat flight computer free?

Yes. All 7 lessons of Build a CubeSat flight computer are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build a CubeSat flight computer take?

About 7 hours: 7 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Power budget, Beacon mode and Project: a ground pass.

Where do I start?

With "Mission design", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
