Source: https://mokxi.com/learn/path/build-carnival-games
Updated: 2026-11-20

All paths

# Build carnival games

Touch targets, light gates and an eight-digit display: whack-a-target, ring toss, skee-ball, high scores and a booth that pays out tickets.

Arduino Uno R3 Free 6 lessons 5 h 3 chapters 1,430 XP Maker · Beginner +100 XP

0 of 6 done

Start the course free Whack targets Build it as a kit Retails for about $34, free on Mokxi. Lesson plan for teachers

What you will build

## 3 projects, built step by step

6 lessons in 3 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Ring toss sensors

Put a light gate at the foot of each peg, count a ring only when the beam stays cut, catch the ones that bounce off, and score a turn.
Open it in the simulator

Chapter 2 project

### Scores

Keep a high score that survives the power going off: EEPROM read at power-up, written only when beaten, and shown as H1 on the display.
Open it in the simulator

Chapter 3 project

### Project: a game booth

Run the whole booth: attract mode, a 30 second clock, tickets and a high score in EEPROM, then make it your own and build it for real.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Targets and sensors

Touch targets and light gates: whack-a-target and a fair ring toss.

Open 190 XP

### Whack targets

Read three touch targets, learn how a touch sensor feels a finger, and build a whack-a-target round with hits, misses and a time limit.

0 of 6 steps

Start What is in it

Project Locked 330 XP

### Ring toss sensors

Put a light gate at the foot of each peg, count a ring only when the beam stays cut, catch the ones that bounce off, and score a turn.

0 of 5 steps

4 questions, graded as you go.

Chapter 2

## Lanes and scores

Skee-ball lanes, a scoreboard and a high score that survives the night.

Locked 165 XP

### Skee-ball lanes

A light gate under each hole worth 10, 30 and 50: catch every fast ball on its edge, show balls and score on a MAX7219, nine balls a game.

0 of 5 steps

Project Locked 280 XP

### Scores

Keep a high score that survives the power going off: EEPROM read at power-up, written only when beaten, and shown as H1 on the display.

0 of 4 steps

4 questions, graded as you go.

Chapter 3

## Run the booth

Tickets, a jackpot, a game clock and attract mode: a booth that runs itself.

Locked 165 XP

### Tickets

Turn a score into tickets with a table and a jackpot, then count them out one chirp at a time like a real ticket machine.

0 of 5 steps

Project Locked 300 XP

### Project: a game booth

Run the whole booth: attract mode, a 30 second clock, tickets and a high score in EEPROM, then make it your own and build it for real.

0 of 5 steps

4 questions, graded as you go.

Syllabus

## Every lesson in the course

All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Targets and sensors

- Whack targets Read three touch targets, learn how a touch sensor feels a finger, and build a whack-a-target round with hits, misses and a time limit.
- Ring toss sensors Put a light gate at the foot of each peg, count a ring only when the beam stays cut, catch the ones that bounce off, and score a turn.

Chapter 2

### Lanes and scores

- Skee-ball lanes A light gate under each hole worth 10, 30 and 50: catch every fast ball on its edge, show balls and score on a MAX7219, nine balls a game.
- Scores Keep a high score that survives the power going off: EEPROM read at power-up, written only when beaten, and shown as H1 on the display.

Chapter 3

### Run the booth

- Tickets Turn a score into tickets with a table and a jackpot, then count them out one chirp at a time like a real ticket machine.
- Project: a game booth Run the whole booth: attract mode, a 30 second clock, tickets and a high score in EEPROM, then make it your own and build it for real.

Keep going

## The next course on your track

Build carnival games is part of the maker track, a ladder of courses from zero to expert.

Next course

### Build game show buzzers

Four lit arcade buttons, a host and a buzzer: judge who pressed first, lock out cheats, keep score and run a real quiz night.
Open the next course

Track

### Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

The kit for this course

### Carnival Games Kit

An Uno, a photo interrupter (slot), a touch sensor (TTP223) and an eight-digit display (MAX7219): carnival games that score and pay out tickets.
Open the kit

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build carnival games

Is Build carnival games free?

Yes. All 6 lessons of Build carnival games are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build carnival games take?

About 5 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Ring toss sensors, Scores and Project: a game booth.

Where do I start?

With "Whack targets", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
