Source: https://mokxi.com/learn/path/build-camera-slider
Updated: 2026-11-20

All paths

# Build a camera slider

A motorized camera slider on a Nano in three short lessons: homing a stepper, an eased video move, and a timelapse that settles before every shot.

Arduino Nano Free 3 lessons 1 h 2 chapters 570 XP Maker · Intermediate +150 XP

0 of 3 done

Start the course free A stepper that knows where it is Lesson plan for teachers

What you will build

## One project, built step by step

3 lessons in 2 chapters, about 1 hour on a simulated Arduino Nano. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### The eased move

A trapezoid of speed: accelerate evenly, cruise, slow evenly, worked out from time in whole numbers, and why the top speed has a limit.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Motion

Home to a switch, then glide the whole rail with an even ease.

Open 138 XP

### A stepper that knows where it is

STEP and DIR into an A4988, steps per millimeter from the belt and pulley, and homing to an end switch so every move starts from a known place.

0 of 4 steps

Start What is in it

Project Locked 276 XP

### The eased move

A trapezoid of speed: accelerate evenly, cruise, slow evenly, worked out from time in whole numbers, and why the top speed has a limit.

0 of 4 steps

Chapter 2

## Timelapse

Move, settle and shoot, frame by frame.

Locked 156 XP

### Timelapse: move, settle, shoot

Divide the rail into equal moves, let the rig stop shaking before every frame, and fire the shutter through an optocoupler on a real camera.

0 of 4 steps

Syllabus

## Every lesson in the course

All 3 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Motion

- A stepper that knows where it is STEP and DIR into an A4988, steps per millimeter from the belt and pulley, and homing to an end switch so every move starts from a known place.
- The eased move A trapezoid of speed: accelerate evenly, cruise, slow evenly, worked out from time in whole numbers, and why the top speed has a limit.

Chapter 2

### Timelapse

- Timelapse: move, settle, shoot Divide the rail into equal moves, let the rig stop shaking before every frame, and fire the shutter through an optocoupler on a real camera.

Keep going

## The next course on your track

Build a camera slider is part of the maker track, a ladder of courses from zero to expert.

Next course

### Build a guitar controller

A rhythm game guitar on a Pro Micro in three short lessons: frets and a strum bar that never double-strums, a whammy and star power, and your own config.
Open the next course

Track

### Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build a camera slider

Is Build a camera slider free?

Yes. All 3 lessons of Build a camera slider are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Nano?

No. Every lesson runs on a simulated Arduino Nano with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build a camera slider take?

About 1 hour: 3 lessons in 2 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: The eased move.

Where do I start?

With "A stepper that knows where it is", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
