Source: https://mokxi.com/learn/path/build-bike-computer
Updated: 2026-11-20

All paths

# Build a bike computer

Hall switches on interrupts, speed and distance from a tire, cadence, automatic lights, an OLED and a ride log on microSD.

Arduino Uno R3 Free 6 lessons 5 h 3 chapters 1,467 XP Maker · Intermediate +150 XP

0 of 6 done

Start the course free Wheel magnet Lesson plan for teachers

What you will build

## 2 projects, built step by step

6 lessons in 3 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Cadence

Add a crank sensor on the second interrupt: pedal turns a minute, the gear worked out from wheel turns per pedal turn, and coasting spotted.
Open it in the simulator

Chapter 2 project

### Display

Put speed in big digits, distance, cadence and the lights on an SSD1306 OLED, with a text-only library that leaves RAM for the card.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Wheels

Magnets, interrupts, speed, distance and cadence.

Open 205 XP

### Wheel magnet

Catch a spoke magnet with an A3144 Hall switch on an interrupt, count every pass the instant it happens, and throw out bounces.

0 of 5 steps

Start What is in it

Locked 205 XP

### Speed and distance

Turn the time for one wheel turn into km/h and the count of turns into meters, for a 2105 mm road tire, with whole-number math.

0 of 5 steps

Project Locked 348 XP

### Cadence

Add a crank sensor on the second interrupt: pedal turns a minute, the gear worked out from wheel turns per pedal turn, and coasting spotted.

0 of 4 steps

4 questions, graded as you go.

Chapter 2

## Lights and screen

Lights that switch themselves and a screen you can read on the move.

Locked 174 XP

### Lights

Switch the headlight on at dusk and off in daylight from a light sensor, with two levels so it never flickers, while the wheel keeps counting.

0 of 4 steps

Project Locked 348 XP

### Display

Put speed in big digits, distance, cadence and the lights on an SSD1306 OLED, with a text-only library that leaves RAM for the card.

0 of 4 steps

3 questions, graded as you go.

Chapter 3

## Ride

A ride log on microSD and a bike computer of your own.

Locked 187 XP

### Project: a ride log

Log every ride to RIDE.CSV on a microSD card, second by second, end the ride after ten still seconds with a summary, and ride on without a card.

0 of 5 steps

3 questions, graded as you go.

Syllabus

## Every lesson in the course

All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Wheels

- Wheel magnet Catch a spoke magnet with an A3144 Hall switch on an interrupt, count every pass the instant it happens, and throw out bounces.
- Speed and distance Turn the time for one wheel turn into km/h and the count of turns into meters, for a 2105 mm road tire, with whole-number math.
- Cadence Add a crank sensor on the second interrupt: pedal turns a minute, the gear worked out from wheel turns per pedal turn, and coasting spotted.

Chapter 2

### Lights and screen

- Lights Switch the headlight on at dusk and off in daylight from a light sensor, with two levels so it never flickers, while the wheel keeps counting.
- Display Put speed in big digits, distance, cadence and the lights on an SSD1306 OLED, with a text-only library that leaves RAM for the card.

Chapter 3

### Ride

- Project: a ride log Log every ride to RIDE.CSV on a microSD card, second by second, end the ride after ten still seconds with a summary, and ride on without a card.

Keep going

## The next course on your track

Build a bike computer is part of the maker track, a ladder of courses from zero to expert.

Next course

### Build a boat autopilot

A tiller pilot for the simulator: a tilt-compensated compass with declination, a limited rudder, a PID heading loop that knows 359 from 1 and ignores waves, and great-circle navigation to GPS waypoints. Never for real navigation.
Open the next course

Track

### Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build a bike computer

Is Build a bike computer free?

Yes. All 6 lessons of Build a bike computer are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build a bike computer take?

About 5 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Cadence and Display.

Where do I start?

With "Wheel magnet", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
