Source: https://mokxi.com/learn/path/build-arc-reactor
Updated: 2026-11-20

All paths

# Build an arc reactor and helmet

An arc reactor style chest light and a moving faceplate in three builds: the glow, the helmet, then the whole suit.

Arduino Uno R3 Free 3 lessons 3 h 1 chapter 635 XP Maker · Beginner +100 XP

0 of 3 done

Start the course free Make the reactor glow Build it as a kit Retails for about $44, free on Mokxi. Lesson plan for teachers

What you will build

## One project, built step by step

3 lessons in 1 chapter, about 3 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Suit up

The chest light and the helmet on one Uno: the reactor breathes while the faceplate glides, the eyes flicker back on and both switches work.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Glow, helmet, suit

Make the reactor glow, give the helmet a faceplate, then run both at once.

Open 165 XP

### Make the reactor glow

A ring of 16 WS2812 LEDs becomes a chest light that powers up, breathes, spins and holds steady, all on one data wire.

0 of 5 steps

Start What is in it

Locked 140 XP

### Open the faceplate

A servo lifts the helmet faceplate on a touch or a button press, gliding instead of slamming, while two eyes fade out with PWM.

0 of 4 steps

Project Locked 330 XP

### Suit up

The chest light and the helmet on one Uno: the reactor breathes while the faceplate glides, the eyes flicker back on and both switches work.

0 of 5 steps

Syllabus

## Every lesson in the course

All 3 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Glow, helmet, suit

- Make the reactor glow A ring of 16 WS2812 LEDs becomes a chest light that powers up, breathes, spins and holds steady, all on one data wire.
- Open the faceplate A servo lifts the helmet faceplate on a touch or a button press, gliding instead of slamming, while two eyes fade out with PWM.
- Suit up The chest light and the helmet on one Uno: the reactor breathes while the faceplate glides, the eyes flicker back on and both switches work.

Keep going

## The next course on your track

Build an arc reactor and helmet is part of the maker track, a ladder of courses from zero to expert.

Next course

### Build load cell pedals

Sim racing pedals on a Pro Micro in three short lessons: a load cell brake on an HX711, a hall throttle and a pot clutch, and the curve that makes it feel right.
Open the next course

Track

### Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

The kit for this course

### Arc Reactor Kit

An LED ring for the chest, a touch pad, a faceplate servo and two glowing eyes.
Open the kit

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build an arc reactor and helmet

Is Build an arc reactor and helmet free?

Yes. All 3 lessons of Build an arc reactor and helmet are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build an arc reactor and helmet take?

About 3 hours: 3 lessons in 1 chapter, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Suit up.

Where do I start?

With "Make the reactor glow", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
