Source: https://mokxi.com/learn/path/build-animatronic-creature
Updated: 2026-11-20

All paths

# Build an animatronic creature

A haunted guest on four servos: keyframe timelines, easing and the animator’s tricks, lip sync to a DFPlayer, PIR triggers with a rest, and idle life so it never freezes.

Arduino Uno R3 Free 6 lessons 6 h 3 chapters 2,026 XP Robotics · Intermediate +150 XP

0 of 6 done

Start the course free Servo choreography Build it as a kit Retails for about $47, free on Mokxi. Lesson plan for teachers

What you will build

## 3 projects, built step by step

6 lessons in 3 chapters, about 6 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

### Easing and the animator’s tricks

Every key carries its own easing. Read a pose at any moment, see smooth against linear to the degree, add anticipation, find follow-through in the numbers, and snap a laugh with steps.
Open it in the simulator

Chapter 2 project

### Triggers

A PIR starts the show when a guest walks up: look, talk, laugh, then a rest that ignores the PIR so the scare does not loop. Tune the rest and give an operator a hidden trigger.
Open it in the simulator

Chapter 3 project

### Project: a haunted guest

Put it together: run the whole show, write a new clip of your own, put it in the show, and fix the guest that never re-triggers for a visitor who will not leave.
Open it in the simulator

The map

## Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

## Choreography

Keyframe timelines on four servos, and easing, anticipation and follow-through.

Open 236 XP

### Servo choreography

A creature moves many joints at once, on one clock. Read a keyframe timeline, play it on four servos, watch the tilt follow the pan, and add keys of your own: a wider look and a gasp.

0 of 6 steps

Start What is in it

Project Locked 472 XP

### Easing and the animator’s tricks

Every key carries its own easing. Read a pose at any moment, see smooth against linear to the degree, add anticipation, find follow-through in the numbers, and snap a laugh with steps.

0 of 6 steps

4 questions, graded as you go.

Chapter 2

## Sound and triggers

Lip sync locked to the DFPlayer’s BUSY pin, and a PIR show with a rest.

Locked 236 XP

### Sound sync

A talking creature lives or dies on lip sync. Start the clock when the DFPlayer’s BUSY pin says the track really started, read what the player is playing, and add a sound to a silent clip.

0 of 6 steps

Project Locked 472 XP

### Triggers

A PIR starts the show when a guest walks up: look, talk, laugh, then a rest that ignores the PIR so the scare does not loop. Tune the rest and give an operator a hidden trigger.

0 of 6 steps

4 questions, graded as you go.

Chapter 3

## Alive

Idle life, then the whole haunted guest made your own.

Locked 236 XP

### Idle life

A creature that freezes between shows is a prop. Give it random blinks and breathing, tune them, and switch them off to see the difference.

0 of 6 steps

Project Locked 374 XP

### Project: a haunted guest

Put it together: run the whole show, write a new clip of your own, put it in the show, and fix the guest that never re-triggers for a visitor who will not leave.

0 of 5 steps

3 questions, graded as you go.

Syllabus

## Every lesson in the course

All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

### Choreography

- Servo choreography A creature moves many joints at once, on one clock. Read a keyframe timeline, play it on four servos, watch the tilt follow the pan, and add keys of your own: a wider look and a gasp.
- Easing and the animator’s tricks Every key carries its own easing. Read a pose at any moment, see smooth against linear to the degree, add anticipation, find follow-through in the numbers, and snap a laugh with steps.

Chapter 2

### Sound and triggers

- Sound sync A talking creature lives or dies on lip sync. Start the clock when the DFPlayer’s BUSY pin says the track really started, read what the player is playing, and add a sound to a silent clip.
- Triggers A PIR starts the show when a guest walks up: look, talk, laugh, then a rest that ignores the PIR so the scare does not loop. Tune the rest and give an operator a hidden trigger.

Chapter 3

### Alive

- Idle life A creature that freezes between shows is a prop. Give it random blinks and breathing, tune them, and switch them off to see the difference.
- Project: a haunted guest Put it together: run the whole show, write a new clip of your own, put it in the show, and fix the guest that never re-triggers for a visitor who will not leave.

Keep going

## The next course on your track

Build an animatronic creature is part of the maker track, a ladder of courses from zero to expert.

Next course

### Build an aquarium controller

Build the controller a reef tank runs on: temperature, a guarded heater, sunrise to moonlight, auto top-off and a feeder.
Open the next course

Track

### Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the track

Kits

## Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

The kit for this course

### Animatronic Creature Kit

An Uno, a servo driver (PCA9685 16-channel), a hobby servo and a motion sensor: a creature that looks, talks and laughs at guests.
Open the kit

Have a kit already?

### Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kit

Questions

## About Build an animatronic creature

Is Build an animatronic creature free?

Yes. All 6 lessons of Build an animatronic creature are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build an animatronic creature take?

About 6 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Easing and the animator’s tricks, Triggers and Project: a haunted guest.

Where do I start?

With "Servo choreography", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.
