Source: https://mokxi.com/ideas/ws2812-projects
Updated: 2026-11-17

Projects / Project ideas
Project ideas by part

# NeoPixel projects

51 Mokxi projects use NeoPixel LEDs (24 beginner, 15 intermediate and 12 advanced). They run on Arduino Uno, ESP32 and Raspberry Pi Pico boards. Here are 24, from “MicroPython NeoPixels on a Pico: 8 LEDs on GP16” to “Key matrix numpad”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “CircuitPython NeoPixel rainbow on a Pico”, a beginner project that needs NeoPixel LEDs.
- Arduino Uno runs 30 of them, ESP32 10 and Raspberry Pi Pico 7. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the push button (16 projects), the piezo speaker (14) and the potentiometer (8). With those on hand, most of this list is open to you.
- Before you build one on a real bench, read the WS2812 NeoPixel LEDs wiring guide for your board below. It gives every pin and the voltage notes.

Projects

## 24 projects of 51

### MicroPython NeoPixels on a Pico: 8 LEDs on GP16

MicroPython on a Raspberry Pi Pico: the neopixel module fills an 8 LED WS2812 module on GP16 with red, green, blue and white, one LED at a time.

Board

Raspberry Pi Pico

Parts

WS2812 NeoPixel LEDs

Level

Beginner

Open in the simulator

### Tree topper star

A WS2812B ring behind a star cutout tops the tree: warm twinkle, a gold comet, a slow rainbow and a red and green chase, one press of a button each.

Board

Arduino Uno R3

Parts

Push button, resistor, WS2812 NeoPixel LEDs

Level

Beginner

Open in the simulator

### CircuitPython NeoPixel rainbow on a Pico

CircuitPython on a Raspberry Pi Pico: Adafruit’s neopixel library turns a rainbow around eight WS2812 LEDs on GP16, sent by the Pico’s PIO.

Board

Raspberry Pi Pico

Parts

WS2812 NeoPixel LEDs

Level

Beginner

Open in the simulator

### Love meter

Hold a TMP36 between your fingers and a bar of ten WS2812B LEDs fills from pink to red with your warmth.

Board

Arduino Uno R3

Parts

TMP36 temperature sensor, resistor, WS2812 NeoPixel LEDs

Level

Beginner

Open in the simulator

### Lunar New Year lantern

A ring of WS2812B LEDs inside a red paper lantern glows red with flickers of gold like a candle, and a light sensor turns it on at dusk.

Board

Arduino Uno R3

Parts

Photoresistor module, resistor, WS2812 NeoPixel LEDs

Level

Beginner

Open in the simulator

### Tug of war game

Tug of war game for two players on a 15-LED NeoPixel strip: every button press pulls the light one LED your way, and the first to pull it off wins.

Board

Arduino Nano

Parts

Arcade button, WS2812 NeoPixel LEDs, piezo speaker

Level

Beginner

Open in the simulator

### ESP32-C6 rainbow

A hue wheel on the DevKitC-1's own RGB LED and seven more, bit-banged on GPIO 8.

Board

ESP32-C6-DevKitC-1

Parts

WS2812 NeoPixel LEDs

Level

Beginner

Open in the simulator

### MicroPython NeoPixel: eight WS2812 LEDs on GPIO 2

MicroPython on an ESP32: the neopixel module fills a strip of eight WS2812 LEDs on GPIO 2 one by one in red, green, blue and white.

Board

ESP32-DevKitC V4

Parts

WS2812 NeoPixel LEDs

Level

Beginner

Open in the simulator

### LED sparkler

Board

Arduino Uno R3

Parts

Push button, resistor, WS2812 NeoPixel LEDs

Level

Beginner

Open in the simulator

### Stop the light game

Stop the light game on a Raspberry Pi Pico: press the button as a red light runs onto the green LED of a 16-LED NeoPixel ring, faster every level.

Board

Raspberry Pi Pico

Parts

WS2812 NeoPixel LEDs, arcade button, piezo speaker

Level

Beginner

Open in the simulator

### Hanukkah menorah

Nine flickering WS2812B lights, eight candles and the shamash: each press is the next night, the shamash lights first and then tonight’s candles.

Board

Arduino Uno R3

Parts

Push button, resistor, WS2812 NeoPixel LEDs

Level

Beginner

Open in the simulator

### Pico W WS2812 strip of eight on GP0

MicroPython on a Pico W: the neopixel module gives each of eight WS2812 pixels on GP0 its own color, then turns the colors along the strip.

Board

Raspberry Pi Pico W

Parts

WS2812 NeoPixel LEDs

Level

Beginner

Open in the simulator

### Distance rainbow

A Sharp GP2Y0A21 measures a hand from 10 to 80 cm and a WS2812 stick lights up from green to red as it comes closer.

Board

Arduino Uno R3

Parts

IR distance sensor, WS2812 NeoPixel LEDs

Level

Beginner

Open in the simulator

### Rainbow strip

An ESP32-C3 runs a hue wheel along sixteen WS2812Bs, bit-banged to the datasheet pulse widths.

Board

ESP32-C3-DevKitM-1

Parts

WS2812 NeoPixel LEDs

Level

Intermediate

Open in the simulator

### Sound-reactive LED strip

A KY-038 microphone and sixteen WS2812Bs on an ESP32-C3: a VU meter with a falling peak dot, and colors that turn with every loud beat.

Board

ESP32-C3-DevKitM-1

Parts

Sound sensor, WS2812 NeoPixel LEDs

Level

Intermediate

Open in the simulator

### Holi color catcher

Hold anything colorful to a TCS34725 sensor and a strip of eight WS2812B LEDs catches its color.

Board

Arduino Uno R3

Parts

Color sensor, resistor, WS2812 NeoPixel LEDs

Level

Intermediate

Open in the simulator

### Arcade button lighting

Four arcade buttons on an ESP32-C3, each lighting its own pair of WS2812B LEDs the moment it is pressed and fading out when it is let go.

Board

ESP32-C3-DevKitM-1

Parts

WS2812 NeoPixel LEDs, arcade button

Level

Intermediate

Open in the simulator

### Haunted window

A WS2812B strip across a window throws lightning in bursts of flashes while four LEDs on the sill flicker like candles.

Board

Arduino Uno R3

Parts

Potentiometer, resistor, WS2812 NeoPixel LEDs

Level

Intermediate

Open in the simulator

### Rangoli lights

A 16x16 WS2812B panel draws glowing rangoli patterns for Diwali, each symmetric eight ways from the center.

Board

Arduino Uno R3

Parts

Push button, resistor, WS2812 NeoPixel LEDs

Level

Intermediate

Open in the simulator

### Ring Simon

Simon on a sixteen-LED ring with a rotary encoder: turn the knob to the color you were shown and press the shaft.

Board

ESP32-C3-DevKitM-1

Parts

WS2812 NeoPixel LEDs, KY-040 rotary encoder

Level

Advanced

Open in the simulator

### Pico W RFID music player with a WS2812 strip

MicroPython on a Pico W: lay an RFID card on an MFRC522 and the notes stored on it play on a passive buzzer while a WS2812 strip flashes a color per.

Board

Raspberry Pi Pico W

Parts

MFRC522 RFID reader, WS2812 NeoPixel LEDs, piezo speaker, transistor, resistor

Level

Advanced

Open in the simulator

### Plasma panel

Three sine waves drift across a 16x16 WS2812B matrix, 256 LEDs on one wire from an ESP32-C3.

Board

ESP32-C3-DevKitM-1

Parts

WS2812 NeoPixel LEDs

Level

Advanced

Open in the simulator

### Pinball table

A table you can play on a Mega: flippers, pop bumpers on a kicker solenoid, targets, a drain beam and a plunger, with a four-digit score.

Board

Arduino Mega 2560 R3

Parts

TM1637 four-digit display, WS2812 NeoPixel LEDs, pinball table, MOSFET, diode, +3 more

Level

Advanced

Open in the simulator

### Key matrix numpad

Twelve switches in a 4 x 3 matrix with a diode on every key, three layers, an encoder and per-key RGB on a Pro Micro, typed as a USB keyboard.

Board

SparkFun Pro Micro

Parts

Push button, diode, KY-040 rotary encoder, WS2812 NeoPixel LEDs

Level

Advanced

Open in the simulator

Keep going

## Wiring, libraries and more ideas

The WS2812 NeoPixel LEDs part page Every project ideas list

### Wiring guides

- WS2812 LED strip to Arduino Uno
- WS2812 LED strip to Raspberry Pi Pico
- WS2812 LED strip to Arduino Nano
- WS2812 LED strip to ESP32

### Library pages

- Adafruit NeoPixel library
- Adafruit NeoMatrix library
- FastLED library
- FastLED NeoMatrix library
- LiteLED library
- NeoPixelBus by Makuna library

### More project ideas

- Arduino Uno project ideas
- ESP32 project ideas
- Raspberry Pi Pico project ideas
- Arduino Mega project ideas
- Projects with a push button
- Projects with a piezo speaker
- Projects with a potentiometer
- Projects with an arcade button
- Servo motor projects
- Projects with an I2C LCD
- Projects with a light sensor module
