Source: https://mokxi.com/ideas/waterpump-projects
Updated: 2026-11-17

Projects / Project ideas
Project ideas by part

# Projects with a water pump

12 Mokxi projects use a mini water pump (3 beginner, 7 intermediate and 2 advanced). They run on Arduino Uno and Raspberry Pi Pico boards. Here are all of them, from “Aquarium air pump and doser” to “Fire fighting robot”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “Pico W water pump on a motor driver”, a beginner project that needs an L9110S motor driver and a water pump.
- Arduino Uno runs 11 of them and Raspberry Pi Pico 1. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the I2C LCD (5 projects), the push button (5) and the relay module (5). With those on hand, most of this list is open to you.
- Before you build one on a real bench, open the mini water pump part page for its pins and what each one does.

Projects

## 12 projects ready to run

### Aquarium air pump and doser

Two D4184 modules on pins 9 and 10 run a 12 V air pump all the time and a peristaltic pump for 3 s, 5 ml, every 20 s.

Board

Arduino Uno R3

Parts

DC jack and adapter, D4184 MOSFET module, mini water pump

Level

Beginner

Open in the simulator

### Pico W water pump on a motor driver

MicroPython on a Pico W: GP14 high and GP15 low keep a small DC water pump running through a two-input motor driver.

Board

Raspberry Pi Pico W

Parts

L9110S motor driver, mini water pump

Level

Beginner

Open in the simulator

### Mini pump plant waterer

A capacitive soil probe watches the pot; when it reads dry, a relay runs the mini pump for three seconds, then waits for the water to soak in.

Board

Arduino Uno R3

Parts

Capacitive soil moisture sensor, relay module, mini water pump

Level

Beginner

Open in the simulator

### Automatic soap dispenser: ultrasonic on 8 and 7, pump on 2

An HC-SR04 (TRIG 8, ECHO 7) sees a hand under the spout and runs a mini water pump for a moment through an L293D whose 1A input is on pin 2.

Board

Arduino Uno R3

Parts

L293D motor driver, mini water pump, HC-SR04 ultrasonic sensor

Level

Intermediate

Open in the simulator

### Ultrasonic water tank level monitor

An HC-SR04 in the lid reads the water level onto an I2C LCD, a relay pump refills from 20 to 90 percent, and a buzzer warns of an overflow.

Board

Arduino Uno R3

Parts

HC-SR04 ultrasonic sensor, relay module, mini water pump, buzzer, I2C LCD

Level

Intermediate

Open in the simulator

### Water level controller with float switches

Two float switches keep a tank between its low and high marks with a pump on a relay; a stuck float or a pump running dry stops it and blinks red.

Board

Arduino Uno R3

Parts

Float switch, push button, resistor, LED, relay module, +2 more

Level

Intermediate

Open in the simulator

### Washing machine

Pick a cycle on the knob and press START: it fills, washes with a reversing drum, drains and spins, and it only spins with the lid shut and locked.

Board

Arduino Uno R3

Parts

Servo motor, two-channel relay board, solenoid, mini water pump, L9110S motor driver, +6 more

Level

Intermediate

Open in the simulator

### Bottling line

A belt brings each bottle to the filler, a pump fills it until the float switch trips, and the LCD counts them.

Board

Arduino Uno R3

Parts

Two-channel relay board, DC motor, mini water pump, FC-51 IR obstacle sensor, float switch, +4 more

Level

Intermediate

Open in the simulator

### Car wash

Drive a car up to the sensor and press START: it rinses, soaps, brushes, rinses and dries on a timeline.

Board

Arduino Uno R3

Parts

Traffic light module, two-channel relay board, solenoid, mini water pump, MX1508 dual motor driver, +7 more

Level

Intermediate

Open in the simulator

### Sump pump controller

A teaching model of a sump controller: two floats run a relay pump, an ACS712 checks that current really flows, and alarms catch a dead pump.

Board

Arduino Uno R3

Parts

Float switch, ACS712 current sensor, relay module, mini water pump, slide switch, +4 more

Level

Intermediate

Open in the simulator

### Plant monitor: light, soil, temperature and a pump

A photoresistor on A0, a soil moisture sensor on A1 and a thermistor on A2 report to an I2C LCD; when the soil dries out.

Board

Arduino Uno R3

Parts

Photoresistor, resistor, 10k NTC thermistor, L293D motor driver, capacitive soil moisture sensor, +2 more

Level

Advanced

Open in the simulator

### Fire fighting robot

Three flame sensors steer a 2WD car on an L298N to the fire, then a relay runs a water pump while a servo sweeps the nozzle until the flame is out.

Board

Arduino Uno R3

Parts

L298N motor driver, 2WD robot car chassis, flame sensor, servo motor, relay module, +1 more

Level

Advanced

Open in the simulator

Keep going

## Wiring, libraries and more ideas

The mini water pump part page Every project ideas list

### Library pages

- LiquidCrystal I2C library
- Servo library

### More project ideas

- Arduino Uno project ideas
- Raspberry Pi Pico project ideas
- Projects with an I2C LCD
- Projects with a push button
- Projects with a relay module
- Projects with a DC motor
- Projects with a float switch
- Projects with a piezo speaker
- Projects with a two-channel relay board
