Source: https://mokxi.com/ideas/trafficlight-projects
Updated: 2026-11-17

Projects / Project ideas
Project ideas by part

# Projects with a traffic light module

18 Mokxi projects use a traffic light module (5 beginner, 11 intermediate and 2 advanced). They run on Arduino Uno and Raspberry Pi boards. Here are all of them, from “Crosswalk” to “Merge jam”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “Traffic lights with gpiozero”, a beginner project that needs a traffic light module and a push button.
- Arduino Uno runs 17 of them and Raspberry Pi 1. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the I2C LCD (9 projects), the piezo speaker (7) and the push button (7). With those on hand, most of this list is open to you.
- Before you build one on a real bench, open the traffic light module part page for its pins and what each one does.

Projects

## 18 projects ready to run

### Crosswalk

A traffic light module runs green, yellow and red on its own, and a button asks for the walk signal sooner; a piezo beeps while it is safe to cross.

Board

Arduino Uno R3

Parts

Traffic light module, push button, piezo speaker

Level

Beginner

Open in the simulator

### Traffic lights with gpiozero

gpiozero TrafficLights and a Button on a Raspberry Pi 4: press the button and the lights go amber, red for crossing, red and amber, then green again.

Board

Raspberry Pi 4 Model B

Parts

Traffic light module, push button

Level

Beginner

Open in the simulator

### Battery level indicator

An 18650 cell straight into A0: its voltage and charge in percent on a 16x2 I2C LCD, and a green, yellow or blinking red light as it runs down.

Board

Arduino Uno R3

Parts

Traffic light module, battery: AA, I2C LCD

Level

Beginner

Open in the simulator

### Gas leak detector with an MQ-2

An MQ-2 on A0 waits out its warm-up, then shows the gas level on a 16x2 I2C LCD and a traffic light, and a buzzer beeps when LPG passes the limit.

Board

Arduino Uno R3

Parts

Traffic light module, buzzer, MQ-2 gas sensor, I2C LCD

Level

Beginner

Open in the simulator

### Smart dustbin

Smart dustbin on an Arduino: an ultrasonic sensor sees a hand and a servo opens the lid.

Board

Arduino Uno R3

Parts

HC-SR04 ultrasonic sensor, piezo speaker, traffic light module, servo motor

Level

Beginner

Open in the simulator

### Fingerprint door lock

An optical fingerprint sensor checks the finger on its glass: an enrolled one swings a servo latch open for three seconds.

Board

Arduino Uno R3

Parts

Fingerprint sensor, traffic light module, servo motor

Level

Intermediate

Open in the simulator

### Breathalyzer with an MQ-3

An MQ-3 alcohol sensor calibrated in clean air with MQUnifiedsensor.

Board

Arduino Uno R3

Parts

Traffic light module, alcohol sensor, I2C LCD

Level

Intermediate

Open in the simulator

### Car wash

Drive a car up to the sensor and press START: it rinses, soaps, brushes, rinses and dries on a timeline.

Board

Arduino Uno R3

Parts

Traffic light module, two-channel relay board, solenoid, mini water pump, MX1508 dual motor driver, +7 more

Level

Intermediate

Open in the simulator

### Zombie tripwire

An ultrasonic tripwire across a corridor: every walker is counted on a display, a traffic light rises from green to red.

Board

Arduino Uno R3

Parts

HC-SR04 ultrasonic sensor, piezo speaker, traffic light module, TM1637 four-digit display

Level

Intermediate

Open in the simulator

### Light curtain

Two E18-D80NK beams guard a servo press: start works only with the beams clear.

Board

Arduino Uno R3

Parts

Traffic light module, servo motor, buzzer, slide switch, arcade button, +2 more

Level

Intermediate

Open in the simulator

### Find the emergency broadcast

Turn a knob across the FM band to find a hidden station: the static fades and a traffic light warms from red to green as you close in.

Board

Arduino Uno R3

Parts

Traffic light module, TM1637 four-digit display, piezo speaker, potentiometer

Level

Intermediate

Open in the simulator

### Tire pressure check station

An MPX5700 gauge pressure sensor on a shop air chuck, auto-zeroed at power up: the tire in psi, kPa and bar on a 20x4 LCD.

Board

Arduino Uno R3

Parts

Traffic light module, pressure sensor, push button, buzzer, 20x4 I2C LCD

Level

Intermediate

Open in the simulator

### Bunker battery gauge

An INA219 measures a battery under load.

Board

Arduino Uno R3

Parts

Battery: AA, INA219 current monitor, resistor, piezo speaker, traffic light module

Level

Intermediate

Open in the simulator

### Reject station

A quality check that tracks each part: an HC-SR04 measures the part's height at the gate.

Board

Arduino Uno R3

Parts

Servo motor, traffic light module, two-channel relay board, DC motor, alarm siren, +3 more

Level

Intermediate

Open in the simulator

### Battery and alternator monitor

A car’s 12 V system through a protected divider on A0: rested charge, the lowest voltage of each start, and whether the alternator is charging.

Board

Arduino Uno R3

Parts

Traffic light module, buzzer, bench power supply, I2C LCD, resistor, +1 more

Level

Intermediate

Open in the simulator

### Bunker airlock interlock

Two servo doors that are never open together: press OUTSIDE or INSIDE and the airlock opens one door, purges with a beeper, then opens the other.

Board

Arduino Uno R3

Parts

Servo motor, traffic light module, piezo speaker, push button

Level

Intermediate

Open in the simulator

### PLC ladder

A motor starter solved like a PLC: every scan reads all inputs into a table, solves the ladder rungs from it and writes the outputs at once.

Board

Arduino Uno R3

Parts

Traffic light module, relay module, DC motor, push button, limit switch, +2 more

Level

Advanced

Open in the simulator

### Merge jam

Two feeder conveyors take turns putting items onto one shared belt, counted by three E18-D80NK sensors.

Board

Arduino Uno R3

Parts

Traffic light module, E18-D80NK IR proximity switch, two-channel relay board, DC motor, push button, +1 more

Level

Advanced

Open in the simulator

Keep going

## Wiring, libraries and more ideas

The traffic light module part page Every project ideas list

### Library pages

- LiquidCrystal I2C library
- Servo library
- TM1637 library
- Adafruit Fingerprint Sensor library
- Adafruit INA219 library
- MQUnifiedsensor library

### More project ideas

- Arduino Uno project ideas
- Raspberry Pi Pico project ideas
- Projects with an I2C LCD
- Projects with a piezo speaker
- Projects with a push button
- Servo motor projects
- Projects with a buzzer
- Projects with a DC motor
- Projects with an E18-D80NK sensor
