Source: https://mokxi.com/ideas/thermistor-projects
Updated: 2026-11-17

Projects / Project ideas
Project ideas by part

# Projects with a thermistor

13 Mokxi projects use a 10k NTC thermistor (2 beginner, 7 intermediate and 4 advanced). They run on Arduino Uno, Raspberry Pi Pico and ESP32 boards. Here are all of them, from “Pico W thermistor thermometer on GP28” to “Water heater thermostat”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “Pico W thermistor thermometer on GP28”, a beginner project that needs a resistor and a thermistor.
- Arduino Uno runs 8 of them, Raspberry Pi Pico 4 and ESP32 1. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the I2C LCD (4 projects), the filament lamp (2) and the LED (2). With those on hand, most of this list is open to you.
- Before you build one on a real bench, open the 10k NTC thermistor part page for its pins and what each one does.

Projects

## 13 projects ready to run

### Pico W thermistor thermometer on GP28

MicroPython on a Pico W: a 10k thermistor divider on GP28, its resistance turned into Celsius and Fahrenheit with the beta equation, once a second.

Board

Raspberry Pi Pico W

Parts

Resistor, 10k NTC thermistor

Level

Beginner

Open in the simulator

### Thermometer: a thermistor on A0

A thermistor and a 10k resistor in a divider on A0: the sketch works out the thermistor’s resistance and turns it into degrees with the beta.

Board

Arduino Uno R3

Parts

10k NTC thermistor, resistor

Level

Beginner

Open in the simulator

### Thermistor thermometer

A 10k thermistor and a 10k resistor make a divider on A0, and the beta equation turns the reading into degrees on a 16x2 LCD.

Board

Arduino Uno R3

Parts

10k NTC thermistor, resistor, 16x2 character LCD

Level

Intermediate

Open in the simulator

### Temperature alarm: thermistor on A0, RGB on 10, 11 and 12

A thermistor in a divider on A0 reads the temperature; an RGB LED (red 10, green 11, blue 12) shows blue when it is cold.

Board

Arduino Uno R3

Parts

RGB LED, resistor, 10k NTC thermistor

Level

Intermediate

Open in the simulator

### MicroPython thermometer: a thermistor on GPIO 36

MicroPython on an ESP32: a 10k NTC thermistor in a divider on GPIO 36, turned into degrees Celsius with the beta equation every second.

Board

ESP32-DevKitC V4

Parts

Resistor, 10k NTC thermistor

Level

Intermediate

Open in the simulator

### Thermometer on an I2C LCD

A 10 k NTC bead in a divider on A0, the temperature on a 16x2 character LCD over its PCF8574 backpack. Four wires to the display.

Board

Arduino Uno R3

Parts

10k NTC thermistor, resistor, I2C LCD

Level

Intermediate

Open in the simulator

### I2C LCD clock and thermometer

An I2C LCD on A4 and A5 shows the time, kept by a timer interrupt every second, and the temperature from a thermistor on A0.

Board

Arduino Uno R3

Parts

10k NTC thermistor, resistor, I2C LCD

Level

Intermediate

Open in the simulator

### MicroPython thermometer on a Pico: thermistor on GP26

MicroPython on a Raspberry Pi Pico: a 10k NTC thermistor and a 10k resistor on GP26, and the B equation, print the temperature every second.

Board

Raspberry Pi Pico

Parts

Resistor, 10k NTC thermistor

Level

Intermediate

Open in the simulator

### Pico W room temperature on an I2C LCD

MicroPython on a Pico W: a 10k thermistor divider on GP28 gives the temperature, and an I2C LCD1602 on GP6 and GP7 shows it every second.

Board

Raspberry Pi Pico W

Parts

I2C LCD, resistor, 10k NTC thermistor

Level

Intermediate

Open in the simulator

### Pico W web server sets an RGB LED

MicroPython on a Pico W: a socket server on port 80 serves a page whose links set an RGB LED on GP13 to GP15 and that shows a thermistor’s.

Board

Raspberry Pi Pico W

Parts

Resistor, 10k NTC thermistor, RGB LED

Level

Advanced

Open in the simulator

### Plant monitor: light, soil, temperature and a pump

A photoresistor on A0, a soil moisture sensor on A1 and a thermistor on A2 report to an I2C LCD; when the soil dries out.

Board

Arduino Uno R3

Parts

Photoresistor, resistor, 10k NTC thermistor, L293D motor driver, capacitive soil moisture sensor, +2 more

Level

Advanced

Open in the simulator

### Heated bed PID

A 100k thermistor, a MOSFET heater and a PID loop holding a modeled bed at its target.

Board

Arduino Uno R3

Parts

Resistor, 10k NTC thermistor, MOSFET, filament lamp, slide switch, +1 more

Level

Advanced

Open in the simulator

### Water heater thermostat

A thermistor, a setpoint knob and an SSR-switched lamp for the element: an 8 F hysteresis band plus a latched high-limit cutout.

Board

Arduino Uno R3

Parts

10k NTC thermistor, resistor, potentiometer, push button, LED, +3 more

Level

Advanced

Open in the simulator

Keep going

## Wiring, libraries and more ideas

The 10k NTC thermistor part page Every project ideas list

### Library pages

- LiquidCrystal I2C library
- LiquidCrystal library
- MsTimer2 library

### More project ideas

- Arduino Uno project ideas
- Raspberry Pi Pico project ideas
- ESP32 project ideas
- Projects with an I2C LCD
- Projects with a lamp
- LED projects for Arduino, ESP32 and Pico
- Projects with an RGB LED
- Projects with an L293D motor driver
- Projects with a 16x2 LCD
- Projects with a photoresistor
