Source: https://mokxi.com/ideas/speaker-projects
Updated: 2026-11-17

Projects / Project ideas
Project ideas by part

# Projects with a speaker

9 Mokxi projects use an 8 ohm speaker (1 beginner, 6 intermediate and 2 advanced). They run on Arduino Uno, Arduino Nano and ESP32 boards. Here are all of them, from “Sleigh-bell doorbell” to “Christmas light show”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “Sleigh-bell doorbell”, a beginner project that needs a push button, a resistor, a speaker and 1 more part.
- Arduino Uno runs 7 of them, Arduino Nano 1 and ESP32 1. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the DFPlayer Mini MP3 module (5 projects), the servo motor (4) and the LED (3). With those on hand, most of this list is open to you.
- Before you build one on a real bench, open the 8 ohm speaker part page for its pins and what each one does.

Projects

## 9 projects ready to run

### Sleigh-bell doorbell

Press the doorbell and a servo shakes a strap of real sleigh bells in time while a speaker plays the chorus of Jingle Bells.

Board

Arduino Uno R3

Parts

Push button, resistor, 8 ohm speaker, servo motor

Level

Beginner

Open in the simulator

### ESP32 I2S sine player

A MAX98357A I2S amplifier on an ESP32 playing a 440 Hz sine into a speaker, the samples computed in the sketch with ESP_I2S.h.

Board

ESP32 DevKit V1

Parts

I2S amplifier, 8 ohm speaker

Level

Intermediate

Open in the simulator

### LM386 speaker amp

An Uno plays a tune with tone() on pin 8, and an LM386 with a gain of 20 drives an 8 ohm speaker from a 9 V battery.

Board

Arduino Uno R3

Parts

Battery: AA, LM386 audio amplifier, resistor, capacitor, 8 ohm speaker

Level

Intermediate

Open in the simulator

### Jump-scare box

A radar inside a box sees someone walk up: a servo throws the lid open, a DFPlayer screams and two red eyes flicker, then it shuts and rearms.

Board

Arduino Uno R3

Parts

DFPlayer Mini MP3 module, resistor, LED, microwave motion sensor, servo motor, +1 more

Level

Intermediate

Open in the simulator

### Animated diorama: DFPlayer sound + stepper

A button plays a C-3PO line on a DFPlayer Mini while a 28BYJ-48 turns R2-D2’s dome.

Board

Arduino Nano

Parts

DFPlayer Mini MP3 module, resistor, push button, 8 ohm speaker, 28BYJ-48 stepper and ULN2003

Level

Intermediate

Open in the simulator

### Talking skull

A PIR wakes a skull: its eyes light and a servo jaw follows a hand-timed cue list in step with a DFPlayer track, until BUSY says the line is over.

Board

Arduino Uno R3

Parts

DFPlayer Mini MP3 module, resistor, LED, PIR motion sensor, servo motor, +1 more

Level

Intermediate

Open in the simulator

### Music box

A tune on an 8 ohm speaker through 100 ohms, a continuous-rotation servo turning the drum.

Board

Arduino Uno R3

Parts

Transistor, resistor, diode, vibration motor, 8 ohm speaker, +1 more

Level

Intermediate

Open in the simulator

### Laser sword

A light saber style sword on an Uno: a WS2812 blade that ignites and retracts, swing and clash from an MPU6050.

Board

Arduino Uno R3

Parts

WS2812 NeoPixel LEDs, MPU6050 accelerometer and gyro, resistor, LED, push button, +3 more

Level

Advanced

Open in the simulator

### Christmas light show

A DFPlayer starts the song and three WS2812B strips, roofline, tree and arch, follow a cue list timed in beats from that moment until the song ends.

Board

Arduino Uno R3

Parts

DFPlayer Mini MP3 module, resistor, WS2812 NeoPixel LEDs, 8 ohm speaker

Level

Advanced

Open in the simulator

Keep going

## Wiring, libraries and more ideas

The 8 ohm speaker part page Every project ideas list

### Library pages

- DFRobotDFPlayerMini library
- Servo library
- Adafruit NeoPixel library
- I2S (ESP32 core and ESP-IDF) library

### More project ideas

- Arduino Uno project ideas
- Arduino Nano project ideas
- ESP32 project ideas
- Projects with a DFPlayer Mini
- Servo motor projects
- LED projects for Arduino, ESP32 and Pico
- Projects with a push button
- NeoPixel projects
- Projects with a capacitor
- Projects with a diode
