Source: https://mokxi.com/ideas/robotarm-projects
Updated: 2026-11-17

Projects / Project ideas
Project ideas by part

# Projects with a robot arm

5 Mokxi projects use a four-servo robot arm (1 intermediate and 4 advanced). They run on Arduino Uno boards. Here are all of them, from “Robot arm with joysticks” to “Robot arm record and playback”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “Robot arm with joysticks”, an intermediate project that needs a robot arm and a joystick.
- All of them run on an Arduino Uno, so that is the one board you need.
- The parts used most here are the joystick (2 projects), the potentiometer (2) and the nRF24L01+ 2.4 GHz radio (1). With those on hand, most of this list is open to you.
- Before you build one on a real bench, open the four-servo robot arm part page for its pins and what each one does.

Projects

## 5 projects ready to run

### Robot arm with joysticks

A four-servo desktop arm on four Uno pins, steered by two joysticks with the Servo library: base and shoulder on one stick.

Board

Arduino Uno R3

Parts

Four-servo robot arm, joystick

Level

Intermediate

Open in the simulator

### Robot arm inverse kinematics

Two knobs set where the claw should be in millimeters, and the Uno solves the shoulder and elbow angles with the law of cosines.

Board

Arduino Uno R3

Parts

Four-servo robot arm, potentiometer

Level

Advanced

Open in the simulator

### Pick and place arm on a PCA9685

A four-servo arm on a PCA9685 servo board with the Adafruit library: it picks a part up on one side, sets it down on the other and goes home.

Board

Arduino Uno R3

Parts

Servo driver, four-servo robot arm

Level

Advanced

Open in the simulator

### Wireless robot arm with nRF24L01

Two Unos and two nRF24L01 radios: joysticks on one board steer a four-servo arm on the other, with a failsafe that holds the arm when the link drops.

Board

Arduino Uno R3

Parts

NRF24L01+ 2.4 GHz radio, four-servo robot arm, joystick

Level

Advanced

Open in the simulator

### Robot arm record and playback

Teach a four-servo arm a routine with four knobs, save each pose to EEPROM with a button, then press PLAY and it glides through them on its own.

Board

Arduino Uno R3

Parts

Four-servo robot arm, push button, potentiometer

Level

Advanced

Open in the simulator

Keep going

## Wiring, libraries and more ideas

The four-servo robot arm part page Every project ideas list

### Library pages

- Servo library
- Adafruit PWM Servo Driver library
- RF24 library

### More project ideas

- Arduino Uno project ideas
- Projects with a joystick
- Projects with a potentiometer
- Projects with an nRF24L01 radio
- Projects with a push button
