Source: https://mokxi.com/ideas/rgbled-projects
Updated: 2026-11-17

Projects / Project ideas
Project ideas by part

# Projects with an RGB LED

25 Mokxi projects use an RGB LED (13 beginner, 8 intermediate and 4 advanced). They run on Arduino Uno, Raspberry Pi Pico and ESP32 boards. Here are 24, from “Motion night light (PIR on 12, RGB on 5, 6 and 9)” to “Keypad lock”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “MicroPython color wheel on a common-anode RGB LED”, a beginner project that needs an RGB LED and a resistor.
- Arduino Uno runs 16 of them, Raspberry Pi Pico 6 and ESP32 3. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the potentiometer (4 projects), the piezo speaker (3) and the IR receiver and remote (2). With those on hand, most of this list is open to you.
- Before you build one on a real bench, read the RGB LED wiring guide for your board below. It gives every pin and the voltage notes.

Projects

## 24 projects of 25

### Motion night light (PIR on 12, RGB on 5, 6 and 9)

An HC-SR501 on pin 12 turns on an RGB LED (red 5, green 6, blue 9) when someone moves, keeps it on for 20 seconds.

Board

Arduino Uno R3

Parts

RGB LED, resistor, PIR motion sensor

Level

Beginner

Open in the simulator

### RGB fade on pins 6, 5 and 3

A common-cathode RGB LED with red on pin 6, green on 5 and blue on 3, each through 220 ohm: analogWrite hands the light from one color to the next.

Board

Arduino Uno R3

Parts

RGB LED, resistor

Level

Beginner

Open in the simulator

### Warm or cool light: a knob blends an RGB LED

A potentiometer on A0 slides an RGB LED (red 11, green 10, blue 9) from a warm orange to a cool blue, mixing the two colors with map() on the way.

Board

Arduino Uno R3

Parts

RGB LED, resistor, potentiometer

Level

Beginner

Open in the simulator

### MicroPython color wheel on a common-anode RGB LED

MicroPython on an ESP32: PWM on GPIO 4, 2 and 15 walks a common-anode RGB LED smoothly around the color wheel, red to green to blue.

Board

ESP32-DevKitC V4

Parts

RGB LED, resistor

Level

Beginner

Open in the simulator

### Random colors on an RGB LED (pins 11, 10 and 9)

An RGB LED on pins 11, 10 and 9 changes to a random color twice a second, three random numbers from 0 to 255 at a time.

Board

Arduino Uno R3

Parts

RGB LED, resistor

Level

Beginner

Open in the simulator

### Three knobs mix an RGB LED (pins 11, 10 and 9)

Three potentiometers on A0, A1 and A2 set the red, green and blue of an RGB LED on pins 11, 10 and 9: mix any color by hand.

Board

Arduino Uno R3

Parts

RGB LED, resistor, potentiometer

Level

Beginner

Open in the simulator

### Color-mixing lamp

Three phototransistors on A0, A1 and A2, one for each color, set the red, green and blue of an RGB LED with analogWrite.

Board

Arduino Uno R3

Parts

Phototransistor, resistor, RGB LED

Level

Beginner

Open in the simulator

### MicroPython random colors on a Pico’s RGB LED

MicroPython on a Raspberry Pi Pico: PWM on GP13, GP12 and GP11 gives a common-anode RGB LED a random color five times a second.

Board

Raspberry Pi Pico

Parts

RGB LED, resistor

Level

Beginner

Open in the simulator

### Pico W RGB LED mixes orange with PWM

MicroPython on a Pico W: an RGB LED with red on GP13, green on GP14 and blue on GP15 mixes orange from PWM levels given as 0 to 255.

Board

Raspberry Pi Pico W

Parts

RGB LED, resistor

Level

Beginner

Open in the simulator

### RGB color mixer

An RGB LED on three PWM pins, each through its own resistor: analogWrite fades it through ten named colors.

Board

Arduino Uno R3

Parts

RGB LED, resistor

Level

Beginner

Open in the simulator

### MicroPython random colors on a common-anode RGB LED

MicroPython on an ESP32: a common-anode RGB LED on GPIO 4, 2 and 15 through 220 ohm each jumps to a random color five times a second.

Board

ESP32-DevKitC V4

Parts

RGB LED, resistor

Level

Beginner

Open in the simulator

### MicroPython color wheel on a Pico’s RGB LED

MicroPython on a Raspberry Pi Pico: a common-anode RGB LED on GP13, GP12 and GP11 drifts through a color wheel, red to green to blue.

Board

Raspberry Pi Pico

Parts

RGB LED, resistor

Level

Beginner

Open in the simulator

### RGB colors on pins 11, 10 and 9

An RGB LED with red on pin 11, green on 10 and blue on 9, each through 220 ohm: analogWrite shows seven colors in turn and names each one.

Board

Arduino Uno R3

Parts

RGB LED, resistor

Level

Beginner

Open in the simulator

### MicroPython color mixer on a Pico: three knobs, RGB LED

MicroPython on a Raspberry Pi Pico: knobs on GP26, GP27 and GP28 set the blue, green and red of a common-anode RGB LED on GP13 to GP15.

Board

Raspberry Pi Pico

Parts

RGB LED, resistor, potentiometer

Level

Intermediate

Open in the simulator

### Remote-controlled colors: IR on pin 2, RGB on 11, 10 and 9

An IR receiver on pin 2 and an RGB LED with red on 11, green on 10 and blue on 9.

Board

Arduino Uno R3

Parts

RGB LED, resistor, IR receiver and remote, IR remote

Level

Intermediate

Open in the simulator

### Temperature alarm: thermistor on A0, RGB on 10, 11 and 12

A thermistor in a divider on A0 reads the temperature; an RGB LED (red 10, green 11, blue 12) shows blue when it is cold.

Board

Arduino Uno R3

Parts

RGB LED, resistor, 10k NTC thermistor

Level

Intermediate

Open in the simulator

### Catch the beans: a tilt game on an 8x8 matrix

Tip an MPU-6050 to slide a cup along a MAX7219 matrix (DIN 13, CLK 7, CS 8) and catch the falling beans.

Board

Arduino Uno R3

Parts

RGB LED, resistor, MAX7219 8x8 LED matrix, MPU6050 accelerometer and gyro, piezo speaker

Level

Intermediate

Open in the simulator

### Memory math game on an LCD and an IR remote

A sum flashes on a 16x2 LCD for two seconds, then you key the answer in on an IR remote (receiver on 12).

Board

Arduino Uno R3

Parts

16x2 character LCD, RGB LED, resistor, IR receiver and remote, IR remote, +1 more

Level

Intermediate

Open in the simulator

### Tilt dice on an 8x8 matrix

Shake the tilt switch on pin 2 and an 8x8 MAX7219 matrix (DIN 13, CLK 7, CS 8) rolls a die and settles on a number, while an RGB LED on pins 9.

Board

Arduino Uno R3

Parts

RGB LED, resistor, tilt switch, MAX7219 8x8 LED matrix

Level

Intermediate

Open in the simulator

### MicroPython color mixer: three knobs, one RGB LED

MicroPython on an ESP32: knobs on GPIO 36, 39 and 34 set the red, green and blue of a common-anode RGB LED on GPIO 15, 2 and 5.

Board

ESP32-DevKitC V4

Parts

Potentiometer, RGB LED, resistor

Level

Intermediate

Open in the simulator

### Pico W fruit piano: MPR121, buzzer and RGB LED

MicroPython on a Pico W: each of the twelve MPR121 electrodes plays its own note on a passive buzzer while an RGB LED flashes a random color.

Board

Raspberry Pi Pico W

Parts

Capacitive touch, piezo speaker, transistor, resistor, RGB LED

Level

Advanced

Open in the simulator

### Pico W web server sets an RGB LED

MicroPython on a Pico W: a socket server on port 80 serves a page whose links set an RGB LED on GP13 to GP15 and that shows a thermistor’s.

Board

Raspberry Pi Pico W

Parts

Resistor, 10k NTC thermistor, RGB LED

Level

Advanced

Open in the simulator

### Alarm clock with a timer on a four-digit display

A DS1307 keeps the time on a four-digit display driven by a 74HC595 (8, 13, 12).

Board

Arduino Uno R3

Parts

74HC595 shift register, four-digit seven-segment display, resistor, push button, RGB LED, +3 more

Level

Advanced

Open in the simulator

### Keypad lock

A 4x4 keypad, a relay and an RGB LED on an Uno: type 1234 then # and the relay clicks the door lamp on.

Board

Arduino Uno R3

Parts

4x4 keypad, RGB LED, resistor, relay module, LED

Level

Advanced

Open in the simulator

Keep going

## Wiring, libraries and more ideas

The RGB LED part page Every project ideas list

### Wiring guides

- RGB LED to Arduino Uno
- RGB LED to Raspberry Pi Pico
- RGB LED to Arduino Mega
- RGB LED to Arduino Nano

### Library pages

- IRremote library
- LedControl library
- DHT sensor library
- Keypad library
- LiquidCrystal library
- RTClib library

### More project ideas

- Arduino Uno project ideas
- Raspberry Pi Pico project ideas
- ESP32 project ideas
- Projects with a potentiometer
- Projects with a piezo speaker
- Projects with an IR receiver and remote
- LED projects for Arduino, ESP32 and Pico
- Projects with a MAX7219 LED matrix
- Projects with a thermistor
