Source: https://mokxi.com/ideas/piezo-projects
Updated: 2026-11-17

Projects / Project ideas
Project ideas by part

# Projects with a piezo speaker

107 Mokxi projects use a piezo speaker (29 beginner, 46 intermediate and 32 advanced). They run on Arduino Uno, Raspberry Pi Pico and ESP32 boards. Here are 24, from “Dreidel spinner” to “Desk buddy robot”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “Passive buzzer on pin 8”, a beginner project that needs a piezo speaker.
- Arduino Uno runs 83 of them, Raspberry Pi Pico 7 and ESP32 6. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the push button (52 projects), the LED (31) and the servo motor (18). With those on hand, most of this list is open to you.
- Before you build one on a real bench, read the piezo speaker wiring guide for your board below. It gives every pin and the voltage notes.

Projects

## 24 projects of 107

### Dreidel spinner

Board

Arduino Uno R3

Parts

Push button, piezo speaker, I2C LCD

Level

Beginner

Open in the simulator

### Tug of war game

Tug of war game for two players on a 15-LED NeoPixel strip: every button press pulls the light one LED your way, and the first to pull it off wins.

Board

Arduino Nano

Parts

Arcade button, WS2812 NeoPixel LEDs, piezo speaker

Level

Beginner

Open in the simulator

### Crosswalk

A traffic light module runs green, yellow and red on its own, and a button asks for the walk signal sooner; a piezo beeps while it is safe to cross.

Board

Arduino Uno R3

Parts

Traffic light module, push button, piezo speaker

Level

Beginner

Open in the simulator

### Stopwatch with lap times

Stopwatch with lap times on an Arduino Nano and a 16x2 LCD: one button starts, stops and carries on, the other takes laps or resets.

Board

Arduino Nano

Parts

Arcade button, piezo speaker, I2C LCD

Level

Beginner

Open in the simulator

### Four-key keyboard

Four buttons share A0 through a ladder of 10k resistors, so each key reads a different number, and a piezo plays C, D, E or F.

Board

Arduino Uno R3

Parts

Push button, resistor, piezo speaker

Level

Beginner

Open in the simulator

### Pico W passive buzzer plays notes with PWM

MicroPython on a Pico W: PWM on GP15 drives a passive buzzer through an S8050 and plays 440, 494 and 523 Hz, a quarter second each.

Board

Raspberry Pi Pico W

Parts

Piezo speaker, transistor, resistor

Level

Beginner

Open in the simulator

### Ultrasonic theremin

Ultrasonic theremin on an Arduino Nano: wave a hand over an HC-SR04 to play notes of a pentatonic scale, or glide the pitch like a real theremin.

Board

Arduino Nano

Parts

HC-SR04 ultrasonic sensor, arcade button, piezo speaker

Level

Beginner

Open in the simulator

### Passive buzzer on pin 8

A passive buzzer on pin 8 plays the eight notes of a C major scale with tone(), one every half second, and names each note as it plays.

Board

Arduino Uno R3

Parts

Piezo speaker

Level

Beginner

Open in the simulator

### Fever thermometer

An MLX90614 reads a forehead without touching it; an I2C LCD shows the temperature, and over 38 C it says FEVER and beeps.

Board

Arduino Uno R3

Parts

IR thermometer, I2C LCD, piezo speaker

Level

Beginner

Open in the simulator

### Stop the light game

Stop the light game on a Raspberry Pi Pico: press the button as a red light runs onto the green LED of a 16-LED NeoPixel ring, faster every level.

Board

Raspberry Pi Pico

Parts

WS2812 NeoPixel LEDs, arcade button, piezo speaker

Level

Beginner

Open in the simulator

### Digital piano

Eight keys and a piezo play an octave from middle C on an Uno.

Board

Arduino Uno R3

Parts

Push button, piezo speaker

Level

Beginner

Open in the simulator

### Electronic voting machine

Electronic voting machine on an Arduino Nano: four buttons to vote, a result button for every count and the winner on an LCD.

Board

Arduino Nano

Parts

Arcade button, piezo speaker, I2C LCD

Level

Beginner

Open in the simulator

### Hatching chick

An egg on an 8x8 MAX7219 matrix wobbles, cracks three times and hatches into a chick that blinks and peeps on a piezo.

Board

Arduino Uno R3

Parts

Push button, piezo speaker, MAX7219 8x8 LED matrix

Level

Beginner

Open in the simulator

### Grabbing candy bowl

An HC-SR04 watches across the top of a candy bowl: when a hand reaches in, a piezo cackles and a servo swings a rubber hand down to grab it.

Board

Arduino Uno R3

Parts

HC-SR04 ultrasonic sensor, servo motor, piezo speaker

Level

Beginner

Open in the simulator

### Morse sender

An ESP32-C3 sends a word in Morse on a lamp and a piezo at once, and a button picks the next message.

Board

ESP32-C3-DevKitM-1

Parts

Resistor, LED, piezo speaker, push button

Level

Beginner

Open in the simulator

### Drum pads

Arduino drum pads: three force-sensing resistors play a kick, a snare and a hi-hat on a piezo, harder hits longer.

Board

Arduino Nano

Parts

Force-sensing resistor, piezo speaker

Level

Intermediate

Open in the simulator

### 555 tone

A 555 astable drives a piezo straight from the output pin, no board and no button.

Board

No board

Parts

Resistor, NE555 timer, capacitor, piezo speaker

Level

Intermediate

Open in the simulator

### MicroPython alarm siren on a passive buzzer

MicroPython on an ESP32: while the button on GPIO 4 is held, a passive buzzer behind an S8050 on GPIO 13 wails between 1500 and 2500 Hz.

Board

ESP32-DevKitC V4

Parts

Piezo speaker, resistor, transistor, push button

Level

Intermediate

Open in the simulator

### Pong, two buttons

A TFT paddle game on an ILI9341 screen, full screen at forty frames a second, played with two buttons.

Board

ESP32-C3-DevKitM-1

Parts

ILI9341 TFT display, push button, piezo speaker

Level

Advanced

Open in the simulator

### Tetris on LED matrices

Tetris on LED matrices with an Arduino Mega: two 8x8 MAX7219s make an 8 by 16 field, with four buttons, all seven pieces.

Board

Arduino Mega 2560 R3

Parts

MAX7219 8x8 LED matrix, arcade button, piezo speaker

Level

Advanced

Open in the simulator

### Space Invaders on an OLED

Space Invaders on an OLED with an Arduino: invaders that march faster as you shoot them, three buttons to move and fire, bombs.

Board

Arduino Uno R3

Parts

Arcade button, piezo speaker, SSD1306 OLED display

Level

Advanced

Open in the simulator

### Chiptune player

A four-channel chiptune on an ESP32-C3: a lead, a harmony, a bass and a noise drum on four piezos, with mute buttons.

Board

ESP32-C3-DevKitM-1

Parts

Push button, piezo speaker

Level

Advanced

Open in the simulator

### Snake

Snake on a 240x320 TFT with a thumb stick: eat the apple, grow, and repaint only the squares that moved.

Board

Arduino Uno R3

Parts

ILI9341 TFT display, joystick, piezo speaker

Level

Advanced

Open in the simulator

### Desk buddy robot

Animated robot eyes on a round GC9A01: it blinks and glances about, beams when you stroke it, gets dizzy when rocked and lonely when ignored.

Board

ESP32-C3-DevKitM-1

Parts

GC9A01 round display, MPU6050 accelerometer and gyro, touch sensor, photoresistor module, piezo speaker

Level

Advanced

Open in the simulator

Keep going

## Wiring, libraries and more ideas

The piezo speaker part page Every project ideas list

### Wiring guides

- buzzer to Arduino Uno
- buzzer to Arduino Nano
- buzzer to Raspberry Pi Pico
- buzzer to ESP32

### Library pages

- Servo library
- LiquidCrystal I2C library
- Adafruit NeoPixel library
- TM1637 library
- Adafruit GFX library
- Adafruit SSD1306 library

### More project ideas

- Arduino Uno project ideas
- Raspberry Pi Pico project ideas
- ESP32 project ideas
- Arduino Mega project ideas
- Projects with a push button
- LED projects for Arduino, ESP32 and Pico
- Servo motor projects
- Projects with a potentiometer
- Projects with an arcade button
- Projects with an ILI9341 TFT display
- Projects with an I2C LCD
