Source: https://mokxi.com/ideas/nema17-projects
Updated: 2026-11-17

Projects / Project ideas
Project ideas by part

# Projects with a NEMA 17 stepper motor

12 Mokxi projects use a NEMA 17 stepper motor (10 intermediate and 2 advanced). They run on Arduino Uno and Arduino Nano boards, and 1 needs no board at all. Here are all of them, from “TB6600 stepper driver” to “Camera slider with eased moves”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “Steppers on A4988 and DRV8825”, an intermediate project that needs an A4988 stepper driver and a NEMA 17 stepper motor.
- Arduino Uno runs 10 of them, Arduino Nano 1 and 1 needs no board at all. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the A4988 stepper driver (7 projects), the limit switch (5) and the push button (4). With those on hand, most of this list is open to you.
- Before you build one on a real bench, open the NEMA 17 stepper motor part page for its pins and what each one does.

Projects

## 12 projects ready to run

### TB6600 stepper driver

A NEMA 23 on a TB6600 wired common cathode to pins 2, 3 and 4: a turn forward, half a turn back, then offline with ENA, at 1/8 step.

Board

Arduino Uno R3

Parts

TB6600 stepper driver, NEMA 17 stepper motor

Level

Intermediate

Open in the simulator

### Steppers on A4988 and DRV8825

STEP and DIR into an A4988 and a DRV8825, each turning a NEMA 17. The same pulses to both, and the DRV8825 turns half as far.

Board

Arduino Uno R3

Parts

A4988 stepper driver, NEMA 17 stepper motor

Level

Intermediate

Open in the simulator

### Two steppers on a CNC shield

A CNC shield v3 with A4988 drivers on an Uno: the X and Y NEMA 17s turn a quarter turn each way, stepped on pins 2 and 3, turned on 5 and 6.

Board

Arduino Uno R3

Parts

CNC shield v3 with A4988s, NEMA 17 stepper motor, DC voltage source

Level

Intermediate

Open in the simulator

### Stepper homing

An A4988 and a NEMA 17 home against a microswitch endstop the way a 3D printer does, fast and then a slow second touch.

Board

Arduino Uno R3

Parts

A4988 stepper driver, NEMA 17 stepper motor, limit switch

Level

Intermediate

Open in the simulator

### TMC2209 stepper driver

A NEMA 17 on a TMC2209 with STEP, DIR and EN on pins 2, 3 and 4: one turn each way at the default 1/8 step, 1600 pulses a turn.

Board

Arduino Uno R3

Parts

TMC2209 stepper driver, NEMA 17 stepper motor

Level

Intermediate

Open in the simulator

### Five StepStick drivers left alone

TMC2208, TMC2209, TMC2100, DRV8834 and DRV8880 on one 200 Hz clock each: left alone, each steps at its own default resolution.

Board

No board

Parts

TMC2208 stepper driver, NEMA 17 stepper motor, clock, TMC2209 stepper driver, TMC2100 stepper driver, +2 more

Level

Intermediate

Open in the simulator

### Filament runout sensor

An optical slot sensor on the filament path and an A4988 extruder: a debounced runout, 10 mm more printed from the filament still in the path.

Board

Arduino Uno R3

Parts

A4988 stepper driver, NEMA 17 stepper motor, slot photo interrupter, push button, LED, +2 more

Level

Intermediate

Open in the simulator

### Stepper speed control with a TMC2209 and a knob

A knob on A0 sets the speed and direction of a NEMA 17 on a quiet TMC2209 with AccelStepper: stop in the middle, up to 120 rpm either way, eased.

Board

Arduino Uno R3

Parts

Potentiometer, TMC2209 stepper driver, NEMA 17 stepper motor

Level

Intermediate

Open in the simulator

### Automatic curtain opener with a stepper motor

A NEMA 17 on an A4988 homes to an end switch, opens the curtain at dawn and closes it at dusk, with a button to open, close or stop and a speed knob.

Board

Arduino Uno R3

Parts

A4988 stepper driver, NEMA 17 stepper motor, DC jack and adapter, capacitor, limit switch, +4 more

Level

Intermediate

Open in the simulator

### XY pen plotter

Two steppers and a pen-lift servo home to their end switches, then draw a square and a star from a list of points, counting every step on an LCD.

Board

Arduino Uno R3

Parts

A4988 stepper driver, NEMA 17 stepper motor, servo motor, push button, limit switch, +1 more

Level

Intermediate

Open in the simulator

### Mini G-code plotter

A two-axis plotter that reads G28, G0, G1, G90, G91 and M114 from the Serial Monitor.

Board

Arduino Uno R3

Parts

A4988 stepper driver, NEMA 17 stepper motor, limit switch

Level

Advanced

Open in the simulator

### Camera slider with eased moves

A NEMA 17 on an A4988 homes to an end switch, then makes a video move that speeds up and slows down evenly, or a timelapse that moves.

Board

Arduino Nano

Parts

LED, resistor, potentiometer, push button, slide switch, +3 more

Level

Advanced

Open in the simulator

Keep going

## Wiring, libraries and more ideas

The NEMA 17 stepper motor part page Every project ideas list

### Library pages

- FastAccelStepper library
- GyverStepper library
- TMCStepper library
- AccelStepper library
- LiquidCrystal I2C library
- Servo library

### More project ideas

- Arduino Uno project ideas
- Arduino Nano project ideas
- Electronics projects with no code
- Projects with an A4988 stepper driver
- Projects with a limit switch
- Projects with a push button
- Projects with a potentiometer
- LED projects for Arduino, ESP32 and Pico
- Projects with a capacitor
