Source: https://mokxi.com/ideas/microswitch-projects
Updated: 2026-11-17

Projects / Project ideas
Project ideas by part

# Projects with a limit switch

22 Mokxi projects use a limit switch (1 beginner, 11 intermediate and 10 advanced). They run on Arduino Uno, Pro Micro and Arduino Nano boards. Here are all of them, from “Pico W micro switch on GP14” to “Motor starter”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “Pico W micro switch on GP14”, a beginner project that needs a limit switch, a resistor and a capacitor.
- Arduino Uno runs 17 of them, Pro Micro 2 and Arduino Nano 1. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the push button (11 projects), the I2C LCD (9) and the servo motor (7). With those on hand, most of this list is open to you.
- Before you build one on a real bench, open the limit switch part page for its pins and what each one does.

Projects

## 22 projects ready to run

### Pico W micro switch on GP14

MicroPython on a Pico W: a lever micro switch with its common on GP14 reads 1 while pressed and 0 at rest, and prints each change.

Board

Raspberry Pi Pico W

Parts

Limit switch, resistor, capacitor

Level

Beginner

Open in the simulator

### Bumper car

A 2WD robot car on a DRV8833 with two lever microswitches for bumpers. It drives until a bumper is hit, then backs off and turns away from that side.

Board

Arduino Uno R3

Parts

DRV8833 motor driver, 2WD robot car chassis, limit switch

Level

Intermediate

Open in the simulator

### Stepper homing

An A4988 and a NEMA 17 home against a microswitch endstop the way a 3D printer does, fast and then a slow second touch.

Board

Arduino Uno R3

Parts

A4988 stepper driver, NEMA 17 stepper motor, limit switch

Level

Intermediate

Open in the simulator

### Guitar controller on a Pro Micro

Five fret buttons, a two-switch strum bar, a whammy knob and a tilt switch for star power, sent as a gamepad report through Joystick.h.

Board

SparkFun Pro Micro

Parts

Limit switch, push button, arcade button, potentiometer, tilt switch

Level

Intermediate

Open in the simulator

### Automatic curtain opener with a stepper motor

A NEMA 17 on an A4988 homes to an end switch, opens the curtain at dawn and closes it at dusk, with a button to open, close or stop and a speed knob.

Board

Arduino Uno R3

Parts

A4988 stepper driver, NEMA 17 stepper motor, DC jack and adapter, capacitor, limit switch, +4 more

Level

Intermediate

Open in the simulator

### Motor starter circuit

The classic 3-wire motor control circuit on a 12 V DC stand-in: a relay as the contactor, a normally closed STOP.

Board

No board

Parts

Limit switch, push button, slide switch, DPDT relay, DC motor

Level

Intermediate

Open in the simulator

### XY pen plotter

Two steppers and a pen-lift servo home to their end switches, then draw a square and a star from a list of points, counting every step on an LCD.

Board

Arduino Uno R3

Parts

A4988 stepper driver, NEMA 17 stepper motor, servo motor, push button, limit switch, +1 more

Level

Intermediate

Open in the simulator

### Washing machine

Pick a cycle on the knob and press START: it fills, washes with a reversing drum, drains and spins, and it only spins with the lid shut and locked.

Board

Arduino Uno R3

Parts

Servo motor, two-channel relay board, solenoid, mini water pump, L9110S motor driver, +6 more

Level

Intermediate

Open in the simulator

### Robot vacuum behaviors

A cleaning robot with two bumpers and a cliff sensor.

Board

Arduino Uno R3

Parts

DRV8833 motor driver, 2WD robot car chassis, limit switch, TCRT5000 line sensor

Level

Intermediate

Open in the simulator

### Bottling line

A belt brings each bottle to the filler, a pump fills it until the float switch trips, and the LCD counts them.

Board

Arduino Uno R3

Parts

Two-channel relay board, DC motor, mini water pump, FC-51 IR obstacle sensor, float switch, +4 more

Level

Intermediate

Open in the simulator

### Gumball machine

Drop a coin and a servo gate lets out one gumball, with a sensor that spots jams, a coin counter and a sold-out sign on an LCD.

Board

Arduino Uno R3

Parts

Servo motor, FC-51 IR obstacle sensor, limit switch, push button, piezo speaker, +1 more

Level

Intermediate

Open in the simulator

### Coin pusher

Drop coins in front of a sweeping servo pusher, count the ones that fall off the front, win a jackpot light show, and watch it back out of a jam.

Board

Arduino Uno R3

Parts

Arcade button, piezo speaker, FC-51 IR obstacle sensor, TM1637 four-digit display, WS2812 NeoPixel LEDs, +2 more

Level

Intermediate

Open in the simulator

### Mini G-code plotter

A two-axis plotter that reads G28, G0, G1, G90, G91 and M114 from the Serial Monitor.

Board

Arduino Uno R3

Parts

A4988 stepper driver, NEMA 17 stepper motor, limit switch

Level

Advanced

Open in the simulator

### Camera slider with eased moves

A NEMA 17 on an A4988 homes to an end switch, then makes a video move that speeds up and slows down evenly, or a timelapse that moves.

Board

Arduino Nano

Parts

LED, resistor, potentiometer, push button, slide switch, +3 more

Level

Advanced

Open in the simulator

### H-pattern shifter and handbrake

Two pots read an H-pattern gate with hysteresis and push-down reverse, two microswitches make sequential paddles and a hall sensor is the handbrake.

Board

SparkFun Pro Micro

Parts

TM1637 four-digit display, limit switch, slide potentiometer, arcade button, 49E linear hall sensor

Level

Advanced

Open in the simulator

### Hexapod robot

Twelve servos on a PCA9685 walk a six-legged robot with the tripod gait: three feet lift and swing forward while the other three hold it up.

Board

Arduino Uno R3

Parts

Servo driver, limit switch, servo motor

Level

Advanced

Open in the simulator

### Arcade claw machine

A complete claw machine you can watch: a stepper gantry with home switches, winch, servo claw and prizes in the cabinet, a coin switch.

Board

Arduino Uno R3

Parts

A4988 stepper driver, joystick, claw machine cabinet, arcade button, DRV8833 motor driver, +5 more

Level

Advanced

Open in the simulator

### Vending machine

Four spiral slots on continuous servos, a keypad, coins and exact change, an LCD price list, a drop sensor that refunds a failed vend.

Board

Arduino Uno R3

Parts

4x4 keypad, I2C LCD, limit switch, vending machine cabinet, piezo speaker

Level

Advanced

Open in the simulator

### PLC ladder

A motor starter solved like a PLC: every scan reads all inputs into a table, solves the ladder rungs from it and writes the outputs at once.

Board

Arduino Uno R3

Parts

Traffic light module, relay module, DC motor, push button, limit switch, +2 more

Level

Advanced

Open in the simulator

### Pick and place

Two steppers home to their switches, then each START moves a part from the pick point to the place point: nozzle down, vacuum on, up, across, down.

Board

Arduino Uno R3

Parts

Relay module, DC motor, servo motor, 28BYJ-48 stepper and ULN2003, limit switch, +2 more

Level

Advanced

Open in the simulator

### ASRS picker

A stepper carriage homes on a limit switch, then counts its steps to the shelf you type on a keypad.

Board

Arduino Uno R3

Parts

4x3 telephone keypad, servo motor, 28BYJ-48 stepper and ULN2003, limit switch, buzzer, +1 more

Level

Advanced

Open in the simulator

### Motor starter

START and a fail-safe STOP, a relay and a small DC motor, and an ACS712 that feeds an inverse-time overload trip with a manual RESET.

Board

Arduino Uno R3

Parts

Push button, resistor, LED, limit switch, ACS712 current sensor, +4 more

Level

Advanced

Open in the simulator

Keep going

## Wiring, libraries and more ideas

The limit switch part page Every project ideas list

### Library pages

- LiquidCrystal I2C library
- Servo library
- Adafruit NeoPixel library
- Arduino Joystick library
- Keypad library
- TM1637 library

### More project ideas

- Arduino Uno project ideas
- Pro Micro and Leonardo project ideas
- Arduino Nano project ideas
- Electronics projects with no code
- Projects with a push button
- Projects with an I2C LCD
- Servo motor projects
- Projects with an A4988 stepper driver
- Projects with a DC motor
- Projects with a piezo speaker
- Projects with a NEMA 17 stepper motor
