Source: https://mokxi.com/ideas/microsd-projects
Updated: 2026-11-17

Projects / Project ideas
Project ideas by part

# Projects with a microSD card module

4 Mokxi projects use a microSD card module (1 intermediate and 3 advanced). They run on Arduino Uno and Arduino Mega boards. Here are all of them, from “Temperature data logger with an SD card” to “RFID attendance system”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “Temperature data logger with an SD card”, an intermediate project that needs a microSD card module, a resistor, an LED and 2 more parts.
- Arduino Uno runs 3 of them and Arduino Mega 1. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the DS3231 real-time clock (2 projects), the LED (2) and the buzzer (1). With those on hand, most of this list is open to you.
- Before you build one on a real bench, open the microSD card module part page for its pins and what each one does.

Projects

## 4 projects ready to run

### Temperature data logger with an SD card

A DS18B20, a DS3231 clock and a microSD card: every 5 seconds a dated temperature line goes into TEMPLOG.CSV, ready to open in a spreadsheet.

Board

Arduino Uno R3

Parts

MicroSD card module, resistor, LED, DS18B20 temperature sensor, DS3231 real-time clock

Level

Intermediate

Open in the simulator

### GPS logger

A NEO-6M on the Mega’s second serial port and a microSD card: every position goes into TRACK.CSV, which you can watch grow and download.

Board

Arduino Mega 2560 R3

Parts

GPS module, microSD card module

Level

Advanced

Open in the simulator

### Rocket flight computer

A model rocket flight computer: launch, burnout and a filtered apogee that fires the parachute servo, with a self-test.

Board

Arduino Uno R3

Parts

MicroSD card module, servo motor, pressure and temperature, MPU6050 accelerometer and gyro, push button, +3 more

Level

Advanced

Open in the simulator

### RFID attendance system

RFID attendance system on an Arduino: tap a card on an RC522, the LCD shows IN, LATE or OUT with the DS3231 time, and a CSV on the SD card logs it.

Board

Arduino Uno R3

Parts

MFRC522 RFID reader, microSD card module, DS3231 real-time clock, I2C LCD, piezo speaker

Level

Advanced

Open in the simulator

Keep going

## Wiring, libraries and more ideas

The microSD card module part page Every project ideas list

### Library pages

- SD library
- SdFat library
- SPI library
- RTClib library
- Adafruit BMP280 library
- DallasTemperature library

### More project ideas

- Arduino Uno project ideas
- Arduino Mega project ideas
- Projects with a DS3231 real-time clock
- LED projects for Arduino, ESP32 and Pico
- Projects with a buzzer
- Projects with a DS18B20 sensor
- Projects with an I2C LCD
- Projects with an RFID reader
