Source: https://mokxi.com/ideas/keypad-projects
Updated: 2026-11-17

Projects / Project ideas
Project ideas by part

# Projects with a 4x4 keypad

14 Mokxi projects use a 4x4 keypad (1 beginner, 6 intermediate and 7 advanced). They run on Arduino Uno, Raspberry Pi Pico and ESP32 boards. Here are all of them, from “Membrane keypad on pins 9 to 2” to “MicroPython keypad door lock with a servo”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “Membrane keypad on pins 9 to 2”, a beginner project that needs a 4x4 keypad.
- Arduino Uno runs 7 of them, Raspberry Pi Pico 4 and ESP32 2. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the servo motor (6 projects), the piezo speaker (4) and the buzzer (3). With those on hand, most of this list is open to you.
- Before you build one on a real bench, read the 4x4 keypad wiring guide for your board below. It gives every pin and the voltage notes.

Projects

## 14 projects ready to run

### Membrane keypad on pins 9 to 2

A 4x4 membrane keypad with its rows on pins 9, 8, 7 and 6 and its columns on 5, 4, 3 and 2: the Keypad library prints every key that is pressed.

Board

Arduino Uno R3

Parts

4x4 keypad

Level

Beginner

Open in the simulator

### Pico W 4x4 keypad on GP2 to GP9

MicroPython on a Pico W: a 4x4 keypad with rows on GP2 to GP5 and columns on GP6 to GP9 with pull-downs, scanned row by row, prints each key.

Board

Raspberry Pi Pico W

Parts

4x4 keypad

Level

Intermediate

Open in the simulator

### MicroPython 4x4 keypad on an ESP32

MicroPython on an ESP32: a 4x4 matrix keypad with rows on GPIO 14, 27, 26, 25 and columns on 13, 21, 22, 23 prints each key you press.

Board

ESP32-DevKitC V4

Parts

4x4 keypad

Level

Intermediate

Open in the simulator

### MicroPython 4x4 keypad on a Pico, GP13 to GP6

MicroPython on a Raspberry Pi Pico: a 4x4 keypad with its rows on GP13 to GP10 and columns on GP9 to GP6 prints each key as it is pressed.

Board

Raspberry Pi Pico

Parts

4x4 keypad

Level

Intermediate

Open in the simulator

### Combination lock: keypad, servo bolt and buzzer

Type 1234 on a keypad (rows 11 to 8, columns 7 to 4) and a servo on pin 12 draws the bolt for two seconds; each key clicks a buzzer on pin 13.

Board

Arduino Uno R3

Parts

4x4 keypad, resistor, transistor, buzzer, servo motor

Level

Intermediate

Open in the simulator

### Pot-of-gold treasure box

Type the lucky code on a 4x4 keypad and a servo unlocks the treasure box, a ring of LEDs shimmers gold inside and a piezo plays a tune.

Board

Arduino Uno R3

Parts

4x4 keypad, resistor, WS2812 NeoPixel LEDs, piezo speaker, servo motor

Level

Intermediate

Open in the simulator

### I2C keypad door lock with an LCD

A 4x4 keypad on a PCF8574 and an I2C LCD share A4 and A5: the right code and # open a servo bolt, and three wrong codes lock the keypad for 30 s.

Board

Arduino Uno R3

Parts

I/O expander, 4x4 keypad, I2C LCD, servo motor

Level

Intermediate

Open in the simulator

### Pico W guess the number: keypad and LCD

MicroPython on a Pico W: a number game on a 4x4 keypad (rows GP21 to GP18.

Board

Raspberry Pi Pico W

Parts

I2C LCD, 4x4 keypad

Level

Advanced

Open in the simulator

### Keypad lock

A 4x4 keypad, a relay and an RGB LED on an Uno: type 1234 then # and the relay clicks the door lamp on.

Board

Arduino Uno R3

Parts

4x4 keypad, RGB LED, resistor, relay module, LED

Level

Advanced

Open in the simulator

### Escape-room puzzle box

Five puzzles in ten minutes: a keypad code, a magnet key, the right RFID card, a tilt sequence and three flashes of light.

Board

Arduino Mega 2560 R3

Parts

4x4 keypad, reed switch, piezo speaker, MPU6050 accelerometer and gyro, servo motor, +6 more

Level

Advanced

Open in the simulator

### Vending machine

Four spiral slots on continuous servos, a keypad, coins and exact change, an LCD price list, a drop sensor that refunds a failed vend.

Board

Arduino Uno R3

Parts

4x4 keypad, I2C LCD, limit switch, vending machine cabinet, piezo speaker

Level

Advanced

Open in the simulator

### MicroPython keypad door lock on a Pico: servo and buzzer

MicroPython on a Raspberry Pi Pico: type 1234 on a 4x4 keypad and a servo on GP0 opens the bolt; each key beeps a buzzer on GP15.

Board

Raspberry Pi Pico

Parts

4x4 keypad, servo motor, resistor, transistor, buzzer

Level

Advanced

Open in the simulator

### Factory 10: Build your own

Design your own factory with a keypad: type two-digit codes to place belts, drills, presses and chests, then run it and watch ore turn into plates.

Board

Arduino Uno R3

Parts

ILI9341 TFT display, 4x4 keypad, resistor, LED, piezo speaker

Level

Advanced

Open in the simulator

### MicroPython keypad door lock with a servo

MicroPython on an ESP32: type 1234 on a 4x4 keypad to swing the servo on GPIO 19 open; every key beeps a buzzer behind an S8050 on GPIO 18.

Board

ESP32-DevKitC V4

Parts

4x4 keypad, buzzer, resistor, transistor, servo motor

Level

Advanced

Open in the simulator

Keep going

## Wiring, libraries and more ideas

The 4x4 keypad part page Every project ideas list

### Wiring guides

- 4x4 keypad to Arduino Uno
- 4x4 keypad to Raspberry Pi Pico
- 4x4 keypad to Arduino Mega
- 4x4 keypad to Arduino Nano
- 4x4 keypad to ESP32

### Library pages

- Keypad library
- I2CKeyPad library
- Adafruit Keypad library
- Servo library
- LiquidCrystal I2C library
- Adafruit NeoPixel library

### More project ideas

- Arduino Uno project ideas
- Raspberry Pi Pico project ideas
- ESP32 project ideas
- Arduino Mega project ideas
- Servo motor projects
- Projects with a piezo speaker
- Projects with a buzzer
- Projects with an I2C LCD
- LED projects for Arduino, ESP32 and Pico
- Projects with a transistor
- Projects with an ILI9341 TFT display
