Source: https://mokxi.com/ideas/joystick-projects
Updated: 2026-11-17

Projects / Project ideas
Project ideas by part

# Projects with a joystick

25 Mokxi projects use a joystick (5 beginner, 6 intermediate and 14 advanced). They run on Arduino Uno, ESP32 and Raspberry Pi Pico boards. Here are 24, from “Pico W joystick on GP27, GP26 and GP22” to “Bop-It reaction game”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “Joystick on A0, A1 and pin 2”, a beginner project that needs a joystick.
- Arduino Uno runs 17 of them, ESP32 4 and Raspberry Pi Pico 2. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the piezo speaker (6 projects), the LED (4) and the ILI9341 TFT display (3). With those on hand, most of this list is open to you.
- Before you build one on a real bench, read the joystick wiring guide for your board below. It gives every pin and the voltage notes.

Projects

## 24 projects of 25

### Pico W joystick on GP27, GP26 and GP22

MicroPython on a Pico W: a joystick with X on GP27, Y on GP26 and its press switch on GP22 with a 10k pull-up, printed five times a second.

Board

Raspberry Pi Pico W

Parts

Joystick, resistor

Level

Beginner

Open in the simulator

### MicroPython joystick on a Pico: X, Y and the press

MicroPython on a Raspberry Pi Pico: a joystick’s X on GP28 and Y on GP27 read as analog, and its switch on GP26, printed ten times a second.

Board

Raspberry Pi Pico

Parts

Joystick

Level

Beginner

Open in the simulator

### MicroPython joystick on GPIO 36, 39 and 14

MicroPython on an ESP32: a joystick module with X on GPIO 36, Y on GPIO 39 and its switch on GPIO 14, printed once a second.

Board

ESP32-DevKitC V4

Parts

Joystick

Level

Beginner

Open in the simulator

### Joystick on A0, A1 and pin 2

A thumb joystick module with X on A0, Y on A1 and its press switch on pin 2: the sketch prints both axes and the switch, and names the direction.

Board

Arduino Uno R3

Parts

Joystick

Level

Beginner

Open in the simulator

### Joystick lights the way (LEDs on 8 to 11)

A joystick on A0, A1 and pin 2 lights one of four LEDs: left on 11, right on 8, up on 10 and down on 9. Press the stick and all four flash.

Board

Arduino Uno R3

Parts

Resistor, LED, joystick

Level

Beginner

Open in the simulator

### Joystick robot car with an L298N

A thumb stick on A1 and A2 drives a 2WD car on an L298N like a tank: throttle plus steer on one wheel, minus on the other, and a press for slow mode.

Board

Arduino Uno R3

Parts

L298N motor driver, 2WD robot car chassis, joystick

Level

Intermediate

Open in the simulator

### Robot arm with joysticks

A four-servo desktop arm on four Uno pins, steered by two joysticks with the Servo library: base and shoulder on one stick.

Board

Arduino Uno R3

Parts

Four-servo robot arm, joystick

Level

Intermediate

Open in the simulator

### ESP32-C3 thumb stick

A thumb stick on the ESP32-C3 ADC: the raw axes go to the serial monitor and how far the stick is pushed sets how brightly the LED on that side is.

Board

ESP32-C3-DevKitM-1

Parts

Joystick, resistor, LED

Level

Intermediate

Open in the simulator

### RC plane elevon and V-tail mixer

An Arduino flight mixer: two joysticks stand in for the sticks, and two servos move as a flying wing’s elevons or a V-tail, picked by a switch.

Board

Arduino Uno R3

Parts

Servo motor, slide switch, joystick

Level

Intermediate

Open in the simulator

### Brushless motor on an ESC

An A2212 1000KV on a 30 A ESC from pin 9: setup() arms it at 1000 us, then a thumb stick on A0 opens the throttle up to 11,100 rpm on 3S.

Board

Arduino Uno R3

Parts

Brushless motor and 30 A ESC, battery: AA, joystick

Level

Intermediate

Open in the simulator

### Joystick bar graph

A thumb stick moves a bar along eight LEDs, and pressing the stick swaps the bar to the other axis.

Board

Arduino Uno R3

Parts

Joystick, resistor, LED

Level

Intermediate

Open in the simulator

### OLED pong on an ESP32-C3

Thumb-stick pong on an ESP32-C3 and an OLED: a twelve-bit ADC moves the paddle and the score is drawn in digits.

Board

ESP32-C3-DevKitM-1

Parts

SSD1306 OLED display, joystick

Level

Advanced

Open in the simulator

### Snake

Snake on a 240x320 TFT with a thumb stick: eat the apple, grow, and repaint only the squares that moved.

Board

Arduino Uno R3

Parts

ILI9341 TFT display, joystick, piezo speaker

Level

Advanced

Open in the simulator

### Pong console

An Uno, a 240x320 TFT, a thumb stick and a piezo: a paddle game in the window an Uno can repaint.

Board

Arduino Uno R3

Parts

ILI9341 TFT display, joystick, piezo speaker

Level

Advanced

Open in the simulator

### Animatronic eyes

Two GC9A01 round displays, one on each side of an ESP32: eyes that glide to follow a joystick, blink on their own or when it is pressed.

Board

ESP32 DevKit V1

Parts

GC9A01 round display, joystick

Level

Advanced

Open in the simulator

### Wireless robot arm with nRF24L01

Two Unos and two nRF24L01 radios: joysticks on one board steer a four-servo arm on the other, with a failsafe that holds the arm when the link drops.

Board

Arduino Uno R3

Parts

NRF24L01+ 2.4 GHz radio, four-servo robot arm, joystick

Level

Advanced

Open in the simulator

### Spaceship control panel

Arm three systems, pass the go/no-go poll, lift the safety and launch.

Board

Arduino Mega 2560 R3

Parts

Slide switch, LED arcade button, TM1637 four-digit display, piezo speaker, WS2812 NeoPixel LEDs, +7 more

Level

Advanced

Open in the simulator

### Flight stick and throttle on a Pro Micro

A two-axis stick with a center deadzone and an expo curve, a twist rudder, a hall sensor throttle, a hat switch and two buttons.

Board

SparkFun Pro Micro

Parts

Game console buttons, 49E linear hall sensor, potentiometer, joystick

Level

Advanced

Open in the simulator

### OLED pong

Pong on a 128x64 OLED with a thumb stick for the paddle: where the ball strikes sets the angle it leaves at.

Board

Arduino Uno R3

Parts

SSD1306 OLED display, joystick

Level

Advanced

Open in the simulator

### Game of Life

Conway's Game of Life on a 32x8 LED sign that wraps round at the edges: draw cells with a thumb stick, run or pause, pour in a random soup.

Board

Arduino Uno R3

Parts

MAX7219 8x8 LED matrix, joystick, push button

Level

Advanced

Open in the simulator

### Snake on two matrices

An 8x16 play field on two MAX7219 modules, steered with a thumb stick: eat the apple, grow, and do not hit a wall or yourself.

Board

Arduino Uno R3

Parts

MAX7219 8x8 LED matrix, joystick

Level

Advanced

Open in the simulator

### Claw machine controller

Steer the claw over a prize in the cabinet with the joystick, then press Drop: the winch lowers it, the servo claw grabs.

Board

Arduino Uno R3

Parts

L293D motor driver, arcade button, claw machine cabinet, joystick

Level

Advanced

Open in the simulator

### Arcade claw machine

A complete claw machine you can watch: a stepper gantry with home switches, winch, servo claw and prizes in the cabinet, a coin switch.

Board

Arduino Uno R3

Parts

A4988 stepper driver, joystick, claw machine cabinet, arcade button, DRV8833 motor driver, +5 more

Level

Advanced

Open in the simulator

### Bop-It reaction game

BOP the button, TWIST the knob or FLICK the stick before the time bar runs out.

Board

Arduino Uno R3

Parts

KY-040 rotary encoder, joystick, SSD1306 OLED display, push button, piezo speaker

Level

Advanced

Open in the simulator

Keep going

## Wiring, libraries and more ideas

The joystick part page Every project ideas list

### Wiring guides

- joystick to Arduino Uno
- joystick to ESP32
- joystick to Arduino Nano

### Library pages

- Servo library
- Adafruit GFX library
- Adafruit NeoPixel library
- LedControl library
- LiquidCrystal I2C library
- Adafruit GC9A01A library

### More project ideas

- Arduino Uno project ideas
- ESP32 project ideas
- Raspberry Pi Pico project ideas
- Arduino Mega project ideas
- Projects with a piezo speaker
- LED projects for Arduino, ESP32 and Pico
- Projects with an ILI9341 TFT display
- Projects with a push button
- Servo motor projects
- OLED display projects
- Projects with an arcade button
