Source: https://mokxi.com/ideas/irreceiver-projects
Updated: 2026-11-17

Projects / Project ideas
Project ideas by part

# Projects with an IR receiver and remote

19 Mokxi projects use an IR receiver and remote (5 beginner and 14 intermediate). They run on Arduino Uno, Raspberry Pi Pico and ESP32 boards. Here are all of them, from “IR remote codes on pin 12” to “Infrared remote rover”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “IR decoder”, a beginner project that needs an IR receiver and remote and an IR remote.
- Arduino Uno runs 13 of them, Raspberry Pi Pico 3 and ESP32 2. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the LED (5 projects), the buzzer (3) and the transistor (3). With those on hand, most of this list is open to you.
- Before you build one on a real bench, read the IR receiver and remote wiring guide for your board below. It gives every pin and the voltage notes.

Projects

## 19 projects ready to run

### IR remote codes on pin 12

An infrared receiver on pin 12: press a button on the remote and the IRremote library prints the code it sends.

Board

Arduino Uno R3

Parts

IR receiver and remote, IR remote

Level

Beginner

Open in the simulator

### Remote control light switch (IR on 12, servo on 11)

An IR receiver on pin 12 and a servo on pin 11: press 1 on the remote and the servo arm swings to flip a wall switch on, press 2 and it flips it off.

Board

Arduino Uno R3

Parts

IR receiver and remote, IR remote, servo motor

Level

Beginner

Open in the simulator

### IR decoder

The kit remote and a VS1838B with the IRremote library: timer 2 samples the receiver in the background.

Board

Arduino Uno R3

Parts

IR receiver and remote, IR remote

Level

Beginner

Open in the simulator

### IR receiver on pin 2

An IR receiver module on pin 2: press a button on the remote and the IRremote library prints the button’s name and its code.

Board

Arduino Uno R3

Parts

IR receiver and remote, IR remote

Level

Beginner

Open in the simulator

### IR remote control relay module

IRremote and a 21-key handset: keys 1 to 4 toggle the four channels of a relay board, each switching a 12 V lamp, and 0 turns them all off.

Board

Arduino Uno R3

Parts

IR remote, IR receiver and remote, four-channel relay board, DC jack and adapter, filament lamp

Level

Beginner

Open in the simulator

### MicroPython IR remote on a Pico: print each button’s code

MicroPython on a Raspberry Pi Pico: an IR receiver on GP15 decodes the kit remote’s NEC frames and prints each button’s hex code.

Board

Raspberry Pi Pico

Parts

IR receiver and remote, resistor, IR remote

Level

Intermediate

Open in the simulator

### Guess the number: IR remote and an I2C LCD

The board picks a number from 0 to 99; type guesses on the remote (IR receiver on pin 2), press PLAY/PAUSE to check.

Board

Arduino Uno R3

Parts

IR receiver and remote, IR remote, I2C LCD

Level

Intermediate

Open in the simulator

### Memory math game on an LCD and an IR remote

A sum flashes on a 16x2 LCD for two seconds, then you key the answer in on an IR remote (receiver on 12).

Board

Arduino Uno R3

Parts

16x2 character LCD, RGB LED, resistor, IR receiver and remote, IR remote, +1 more

Level

Intermediate

Open in the simulator

### Remote-controlled colors: IR on pin 2, RGB on 11, 10 and 9

An IR receiver on pin 2 and an RGB LED with red on 11, green on 10 and blue on 9.

Board

Arduino Uno R3

Parts

RGB LED, resistor, IR receiver and remote, IR remote

Level

Intermediate

Open in the simulator

### Pico W infrared remote decoder on GP17

MicroPython on a Pico W: an IR receiver on GP17 and a small NEC decoder timed from pin interrupts print the name of each remote button pressed.

Board

Raspberry Pi Pico W

Parts

IR receiver and remote, IR remote

Level

Intermediate

Open in the simulator

### MicroPython infrared remote codes on GPIO 15

MicroPython on an ESP32: an IR receiver on GPIO 15 and a small NEC decoder print the code of each button pressed on the remote.

Board

ESP32-DevKitC V4

Parts

IR remote, IR receiver and remote, resistor

Level

Intermediate

Open in the simulator

### Laser tag: two Nanos

Infrared laser tag for two Arduino Nanos: each button fires an NEC code through an IR LED, and the other player’s VS1838B counts the hit.

Board

Arduino Nano

Parts

Infrared LED, IR receiver and remote, resistor, push button, LED, +1 more

Level

Intermediate

Open in the simulator

### Remote stepper

An IR receiver on pin 12 and a 28BYJ-48 on its ULN2003 board: VOL+ turns the shaft a quarter turn and VOL- turns it back.

Board

Arduino Uno R3

Parts

28BYJ-48 stepper and ULN2003, IR receiver and remote, IR remote

Level

Intermediate

Open in the simulator

### MicroPython IR remote dimmer on a Pico: keys 0 to 3

MicroPython on a Raspberry Pi Pico: remote keys 0 to 3, read by an IR receiver on GP16, set four levels for the LED on GP14 and beep a buzzer.

Board

Raspberry Pi Pico

Parts

IR receiver and remote, resistor, IR remote, LED, transistor, +1 more

Level

Intermediate

Open in the simulator

### Four AC lamps on an IR remote SSR board

Keys 1 to 4 on an IR handset toggle the four channels of a G3MB-202P solid-state relay board, each switching a 12 V AC lamp; 0 turns them all off.

Board

Arduino Uno R3

Parts

IR remote, IR receiver and remote, SSR board, signal generator, filament lamp

Level

Intermediate

Open in the simulator

### Remote dimmer: IR on 12, LED on 5, buzzer on 13

Buttons 0 to 3 on the remote set the LED on pin 5 to off, dim, medium and full; an active buzzer on pin 13, switched by an NPN transistor.

Board

Arduino Uno R3

Parts

Resistor, LED, transistor, buzzer, IR receiver and remote, +1 more

Level

Intermediate

Open in the simulator

### Remote-controlled lamps

A 21-button handset, a VS1838B and three lamps. NEC decoded from pulse widths, and a receiver that inverts everything it hears.

Board

Arduino Uno R3

Parts

IR remote, IR receiver and remote, resistor, LED

Level

Intermediate

Open in the simulator

### MicroPython remote sets an LED’s brightness

MicroPython on an ESP32: keys 0 to 3 on an IR remote set the PWM brightness of the LED on GPIO 14, and a buzzer beeps on each key.

Board

ESP32-DevKitC V4

Parts

IR remote, IR receiver and remote, resistor, LED, buzzer, +1 more

Level

Intermediate

Open in the simulator

### Infrared remote rover

A two-wheel robot driven from a 21-button infrared remote.

Board

Arduino Uno R3

Parts

MX1508 dual motor driver, 2WD robot car chassis, IR receiver and remote, IR remote

Level

Intermediate

Open in the simulator

Keep going

## Wiring, libraries and more ideas

The IR receiver and remote part page Every project ideas list

### Wiring guides

- IR receiver to Arduino Uno
- IR receiver to Raspberry Pi Pico
- IR receiver to Arduino Nano
- IR receiver to Arduino Mega
- IR receiver to ESP32

### Library pages

- IRremote library
- IRremoteESP8266 library
- LiquidCrystal I2C library
- LiquidCrystal library
- Servo library
- Stepper library

### More project ideas

- Arduino Uno project ideas
- Raspberry Pi Pico project ideas
- ESP32 project ideas
- Arduino Nano project ideas
- LED projects for Arduino, ESP32 and Pico
- Projects with a buzzer
- Projects with a transistor
- Projects with a lamp
- Projects with an RGB LED
- Projects with a robot car chassis
