Source: https://mokxi.com/ideas/iot
Updated: 2026-11-17

Projects / Project ideas
IoT

# IoT project ideas for ESP32 and Pico W

These projects are tagged IoT. They cover WiFi web servers, Bluetooth, ESP-NOW, LoRa, SMS and Home Assistant sensors. Mokxi has 47 of them (18 beginner, 23 intermediate and 6 advanced). Here are 24, from “ESP32 web server with two LEDs” to “LoRa messenger”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “HC-06 Bluetooth chat”, a beginner project that needs a bluetooth serial module.
- Most of them are intermediate projects. Pick one a level below what you think you can do, finish it, then move up.
- The parts used most here are the LED (14 projects), the push button (6) and the filament lamp (5). With those on hand, most of this list is open to you.
- Get the board on WiFi and printing its address before you add a sensor. A web page that never loads is nearly always the network, not the sensor.

Projects

## 24 projects of 47

### ESP32 web server with two LEDs

The Random Nerd Tutorials ESP32 web server: press Run, open the Web panel, and its ON and OFF buttons switch the LEDs on GPIO 26 and 27.

Board

ESP32 DevKit V1

Parts

Resistor, LED

Level

Beginner

Open in the simulator

### Receive an SMS

The GSM receive sketch on a SIM900A, on a simulated network: type sms hello in the modem’s serial box and the Uno prints the +CMT line and the text.

Board

Arduino Uno R3

Parts

GSM modem, DC jack and adapter

Level

Beginner

Open in the simulator

### IR remote control relay module

IRremote and a 21-key handset: keys 1 to 4 toggle the four channels of a relay board, each switching a 12 V lamp, and 0 turns them all off.

Board

Arduino Uno R3

Parts

IR remote, IR receiver and remote, four-channel relay board, DC jack and adapter, filament lamp

Level

Beginner

Open in the simulator

### ESP32 Bluetooth serial lamp

BluetoothSerial on the ESP32: pair with ESP32-Lamp in the Bluetooth tab, send on or off, and the LED answers.

Board

ESP32 DevKit V1

Parts

Resistor, LED

Level

Beginner

Open in the simulator

### Pico W joins WiFi in MicroPython

MicroPython on a Pico W: network.WLAN joins the simulated access point with a ten-second limit and prints the IP address it was given.

Board

Raspberry Pi Pico W

Parts

Just the board

Level

Beginner

Open in the simulator

### HC-06 Bluetooth chat

An HC-06 on SoftwareSerial at 9600. Pair from the Bluetooth tab with PIN 1234, connect, and send 1 or 0 for the LED. Simulated Bluetooth, no radio.

Board

Arduino Uno R3

Parts

Bluetooth serial module

Level

Beginner

Open in the simulator

### MicroPython WiFi access point mode on an ESP32

MicroPython on an ESP32: network.WLAN(AP_IF) starts a hotspot of the board’s own and prints its name and its IP settings.

Board

ESP32-DevKitC V4

Parts

Just the board

Level

Beginner

Open in the simulator

### Home Assistant multisensor

Temperature, humidity, light and motion on one ESP32-C3, the room sensor Home Assistant users build first.

Board

ESP32-C3-DevKitM-1

Parts

Light sensor, DHT11 or DHT22 sensor, PIR motion sensor, resistor, LED

Level

Intermediate

Open in the simulator

### MicroPython WiFi AP and station at once on an ESP32

MicroPython on an ESP32: the board starts its own hotspot and joins Mokxi’s simulated access point at the same time, and prints both addresses.

Board

ESP32-DevKitC V4

Parts

Just the board

Level

Intermediate

Open in the simulator

### Bluetooth lamp

An HC-05 modeled as what it is to the board: a serial bridge whose far end is the serial monitor. Type on or off and the lamp answers.

Board

Arduino Uno R3

Parts

HC-05 Bluetooth module, resistor, LED

Level

Intermediate

Open in the simulator

### API lab: fetch JSON

Call an API with normal HTTPClient code, edit its JSON response in Cloud and inspect the complete request and response.

Board

ESP32-C3-DevKitM-1

Parts

Just the board

Level

Intermediate

Open in the simulator

### ESP-NOW button and LED

Two ESP32s and no wire between them: the button on one sends on or off over ESP-NOW, the other lights its LED and prints each message.

Board

ESP32 DevKit V1

Parts

Push button, resistor, LED

Level

Intermediate

Open in the simulator

### RS-485 link

Two MAX485 modules on one A/B pair carry a numbered ping from the Uno’s TX to pin 8, with pin 4 switching the sender between talk and listen.

Board

Arduino Uno R3

Parts

RS-485 module

Level

Intermediate

Open in the simulator

### WiFi: a lamp on a web page

A WebServer with two buttons and a form. Press one in the Web panel and the LED on the breadboard follows; the network under it is simulated.

Board

ESP32-C3-DevKitM-1

Parts

Resistor, LED

Level

Intermediate

Open in the simulator

### MicroPython WiFi AP and station at once on a Pico W

MicroPython on a Raspberry Pi Pico W: the board starts its own access point and joins Mokxi’s simulated network at the same time, printing both.

Board

Raspberry Pi Pico W

Parts

Just the board

Level

Intermediate

Open in the simulator

### Radar hallway sensor

An RCWL-0516 radar holds a hallway "occupied" for ten seconds after the last movement and lights the lamp only when it is dark.

Board

ESP32-C3-DevKitM-1

Parts

Photoresistor module, microwave motion sensor, resistor, LED

Level

Intermediate

Open in the simulator

### LD2410 presence radar

A Hi-Link LD2410 mmWave radar on the Mega’s Serial1 at 256000 baud: the ld2410 library tells a moving person from a still one, and OUT lights the LED.

Board

Arduino Mega 2560 R3

Parts

Presence radar

Level

Intermediate

Open in the simulator

### ESP-NOW on two NodeMCUs

Two ESP8266 boards talking ESP-NOW with the ESP8266 core’s espnow.h: one sends a count and a knob reading every two seconds.

Board

ESP8266 NodeMCU V1.0

Parts

Potentiometer

Level

Intermediate

Open in the simulator

### Garage door opener

A relay that presses the opener’s wall button for half a second and two reed switches that say closed, opening, open, closing or stopped.

Board

ESP32-C3-DevKitM-1

Parts

Reed switch, push button, relay module

Level

Intermediate

Open in the simulator

### LED strip controller

Sixteen WS2812B pixels with on, off, brightness, color and two effects, faded between, from two buttons and a knob on the strip or from the Web tab.

Board

ESP32-C3-DevKitM-1

Parts

Potentiometer, push button, WS2812 NeoPixel LEDs

Level

Intermediate

Open in the simulator

### Pico W web server sets an RGB LED

MicroPython on a Pico W: a socket server on port 80 serves a page whose links set an RGB LED on GP13 to GP15 and that shows a thermistor’s.

Board

Raspberry Pi Pico W

Parts

Resistor, 10k NTC thermistor, RGB LED

Level

Advanced

Open in the simulator

### Send a heartbeat

Two Unos, each with an nRF24L01 radio, a button and a red LED: press the button on one and the heart on the other beats lub-dub.

Board

Arduino Uno R3

Parts

NRF24L01+ 2.4 GHz radio, push button, resistor, LED

Level

Advanced

Open in the simulator

### Smart home hub

An ESP32-C3 web dashboard that switches a lamp and a fan through relays, dims a porch light, reads temperature, humidity and motion.

Board

ESP32-C3-DevKitM-1

Parts

Two-channel relay board, filament lamp, DC motor, LED, resistor, +4 more

Level

Advanced

Open in the simulator

### LoRa messenger

Two Unos, a Ra-02 LoRa module each and no wire between them: one sends a numbered message every two seconds, the other prints it.

Board

Arduino Uno R3

Parts

LoRa module

Level

Advanced

Open in the simulator

See all 47 IoT projects on the templates page

Keep going

## Wiring, libraries and more ideas

Every project ideas list

### Wiring guides

- LED to Arduino Uno
- LED to Arduino Mega
- push button to Arduino Uno
- push button to ESP32
- push button to Arduino Mega
- DHT22 to Arduino Uno
- PIR motion sensor to Arduino Uno
- DHT22 to ESP32

### Library pages

- DHT sensor library
- IRremote library
- RF24 library
- Adafruit BME280 library
- Adafruit NeoPixel library
- Adafruit Unified Sensor library

### More project ideas

- ESP32 project ideas
- Arduino Uno project ideas
- Raspberry Pi Pico project ideas
- Arduino Mega project ideas
- LED projects for Arduino, ESP32 and Pico
- Projects with a push button
- Projects with a lamp
- Projects with an HC-05 Bluetooth module
- Projects with a DHT11 or DHT22 sensor
- Projects with a PIR motion sensor
- Projects with an IR receiver and remote
