Source: https://mokxi.com/ideas/intermediate
Updated: 2026-11-17

Projects / Project ideas
Project ideas by level

# Intermediate Arduino and ESP32 projects

An intermediate project adds a library, a display or a sensor bus like I2C or SPI, and code split into functions. Mokxi has 389 projects at this level. Here are 24, picked across boards and topics. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “BME280 on a Pi Zero 2 W with smbus2”, an intermediate project that needs a BME280 sensor.
- Arduino Uno runs 258 of them, ESP32 50 and Raspberry Pi Pico 38. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the LED (100 projects), the push button (81) and the potentiometer (48). With those on hand, most of this list is open to you.
- Read the sketch before you run it and guess what the serial monitor will print; checking that guess is how the next level starts.

Projects

## 24 projects of 389

### MicroPython alarm on a Pico: a siren on a passive buzzer

MicroPython on a Raspberry Pi Pico: while the button on GP16 is held, PWM on GP15 sweeps a passive buzzer between 1 and 2 kHz like a siren.

Board

Raspberry Pi Pico

Parts

Resistor, transistor, piezo speaker, push button

Level

Intermediate

Open in the simulator

### Flappy Bird on an OLED

Flappy Bird on an OLED with an Arduino: one button to flap through the pipes, gravity in whole numbers, sound on a piezo and the best score in EEPROM.

Board

Arduino Uno R3

Parts

Arcade button, piezo speaker, SSD1306 OLED display

Level

Intermediate

Open in the simulator

### ESP32 DHT22 weather web server

ESP32 DHT22 weather web server: the board serves its own page with the temperature in C and F and the humidity, plus the same reading as JSON.

Board

ESP32 DevKit V1

Parts

DHT11 or DHT22 sensor

Level

Intermediate

Open in the simulator

### Pico W four-digit display counts seconds

MicroPython on a Pico W: a 74HC595 on GP18 to GP20 and digit selects on GP10 to GP13 multiplex a four-digit display that counts the seconds.

Board

Raspberry Pi Pico W

Parts

74HC595 shift register, four-digit seven-segment display, resistor

Level

Intermediate

Open in the simulator

### 555 on the bench

A 555 astable with a scope on its output and its timing capacitor and a multimeter reading the average: the frequency.

Board

No board

Parts

Resistor, NE555 timer, capacitor, oscilloscope, multimeter

Level

Intermediate

Open in the simulator

### Sound-reactive LED strip

A KY-038 microphone and sixteen WS2812Bs on an ESP32-C3: a VU meter with a falling peak dot, and colors that turn with every loud beat.

Board

ESP32-C3-DevKitM-1

Parts

Sound sensor, WS2812 NeoPixel LEDs

Level

Intermediate

Open in the simulator

### Fight stick on a Pro Micro

A four-way lever and six buttons on a Pro Micro, debounced with no added delay and reported as a numpad direction plus the buttons held.

Board

SparkFun Pro Micro

Parts

Game console buttons, arcade button

Level

Intermediate

Open in the simulator

### Four-digit display on a 74HC595 (pins 8, 10 and 9)

A 74HC595 with data on pin 8, clock on 10 and latch on 9 drives the segments of a four-digit display whose digits are all switched on.

Board

Arduino Uno R3

Parts

74HC595 shift register, four-digit seven-segment display, resistor

Level

Intermediate

Open in the simulator

### JK flip-flop counter

Two JK flip-flops in a 74HC112 toggle on each falling clock edge and count 0 to 3 in binary on two LEDs.

Board

No board

Parts

Clock, 74HC112 dual JK flip-flop, resistor, LED

Level

Intermediate

Open in the simulator

### Animated diorama: DFPlayer sound + stepper

A button plays a C-3PO line on a DFPlayer Mini while a 28BYJ-48 turns R2-D2’s dome.

Board

Arduino Nano

Parts

DFPlayer Mini MP3 module, resistor, push button, 8 ohm speaker, 28BYJ-48 stepper and ULN2003

Level

Intermediate

Open in the simulator

### HC-SR04 distance sensor with gpiozero

gpiozero DistanceSensor on a Raspberry Pi 5: an HC-SR04 with its echo divided down to 3.3 V.

Board

Raspberry Pi 5

Parts

HC-SR04 ultrasonic sensor, resistor, LED

Level

Intermediate

Open in the simulator

### SSD1306 OLED on a Pi with smbus2

A Raspberry Pi 4 draws text on an SSD1306 OLED over I2C bus 1 with smbus2: an uptime counter each second, and how long each frame takes at 100 kHz.

Board

Raspberry Pi 4 Model B

Parts

SSD1306 OLED display

Level

Intermediate

Open in the simulator

### BME280 on a Pi Zero 2 W with smbus2

A Raspberry Pi Zero 2 W reads a BME280 over I2C with smbus2 and the datasheet formulas: temperature, pressure and humidity every two seconds.

Board

Raspberry Pi Zero 2 W

Parts

BME280 weather sensor

Level

Intermediate

Open in the simulator

### Rainbow strip

An ESP32-C3 runs a hue wheel along sixteen WS2812Bs, bit-banged to the datasheet pulse widths.

Board

ESP32-C3-DevKitM-1

Parts

WS2812 NeoPixel LEDs

Level

Intermediate

Open in the simulator

### An ESP32 and an Arduino Uno talking over serial

An ESP32 reads a knob and sends the number to an Arduino Uno over a serial wire; the Uno sets an LED’s brightness from it.

Board

ESP32 DevKit V1 and Arduino Uno R3

Parts

Potentiometer, resistor, LED

Level

Intermediate

Open in the simulator

### Stream deck on a Pro Micro

Six keys with their labels drawn on an SSD1306 OLED, a second page on the sixth key, and a Ctrl+Shift+F-key hotkey for each press through Keyboard.h.

Board

SparkFun Pro Micro

Parts

SSD1306 OLED display, arcade button

Level

Intermediate

Open in the simulator

### ESP-NOW on two NodeMCUs

Two ESP8266 boards talking ESP-NOW with the ESP8266 core’s espnow.h: one sends a count and a knob reading every two seconds.

Board

ESP8266 NodeMCU V1.0

Parts

Potentiometer

Level

Intermediate

Open in the simulator

### LED and key

A TM1638 LED&KEY board with the TM1638plus library: each button lights its LED, and the display counts the presses.

Board

Arduino Uno R3

Parts

LED and key board

Level

Intermediate

Open in the simulator

### LM393 night light with a ULN2003A

An LM393 compares an LDR with a knob, its open-collector output pulled up by 10 k.

Board

No board

Parts

Photoresistor, resistor, potentiometer, LM393 dual comparator, ULN2003A Darlington array, +1 more

Level

Intermediate

Open in the simulator

### Drum pads

Arduino drum pads: three force-sensing resistors play a kick, a snare and a hi-hat on a piezo, harder hits longer.

Board

Arduino Nano

Parts

Force-sensing resistor, piezo speaker

Level

Intermediate

Open in the simulator

### Grove OLED

The 1.12 inch 128x128 SH1107 OLED with Adafruit’s SH110X library on a Mega: a ball bounces around the square, sent as sixteen pages of RAM.

Board

Arduino Mega 2560 R3

Parts

OLED display

Level

Intermediate

Open in the simulator

### WiFi: fetch the weather

HTTPClient against a simulated origin, with the numbers on a dial in the Cloud panel, and a request to the real internet that is refused.

Board

ESP32-C3-DevKitM-1

Parts

Just the board

Level

Intermediate

Open in the simulator

### I2C LCD clock and thermometer

An I2C LCD on A4 and A5 shows the time, kept by a timer interrupt every second, and the temperature from a thermistor on A0.

Board

Arduino Uno R3

Parts

10k NTC thermistor, resistor, I2C LCD

Level

Intermediate

Open in the simulator

### TL072 amplifier on +-12 V

A TL072 inverting amplifier with a gain of -4.7 on a +12 V and -12 V supply: a 1 V sine in, a 4.7 V sine out, upside down and both sides of ground.

Board

No board

Parts

Function generator, TL072 dual JFET op-amp, resistor, oscilloscope

Level

Intermediate

Open in the simulator

See all 389 intermediate projects on the templates page

Keep going

## Wiring, libraries and more ideas

Guides and tutorials on /learn Every project ideas list

### Wiring guides

- buzzer to Arduino Uno
- LED to Arduino Uno
- potentiometer to Arduino Uno
- SSD1306 OLED to Arduino Uno
- buzzer to Arduino Nano
- buzzer to ESP32
- LED to Arduino Nano
- potentiometer to Arduino Nano

### Library pages

- Adafruit GFX library
- Adafruit SSD1306 library
- Adafruit SH110X library
- DFRobotDFPlayerMini library
- DHT sensor library
- ESP-NOW (ESP8266 core) library

### More project ideas

- Arduino Uno project ideas
- ESP32 project ideas
- Raspberry Pi Pico project ideas
- Electronics projects with no code
- Projects with an arcade button
- LED projects for Arduino, ESP32 and Pico
- Projects with a piezo speaker
- Projects with a potentiometer
- OLED display projects
- Projects with a 74HC595 shift register
- Projects with a push button
- Projects with a four-digit seven-segment display
