Source: https://mokxi.com/ideas/games
Updated: 2026-11-17

Projects / Project ideas
Games

# Arduino game projects

Games are the quickest way to learn input, timing and a display, because you know at once when something is off. Mokxi has 77 of them (6 beginner, 34 intermediate and 37 advanced). Here are 24, from “Arcade lever” to “Rhythm game”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “Arcade lever”, a beginner project that needs an arcade joystick lever.
- Most of them are advanced projects. Pick one a level below what you think you can do, finish it, then move up.
- The parts used most here are the piezo speaker (35 projects), the arcade button (25) and the push button (24). With those on hand, most of this list is open to you.
- Pick a game you already know the rules of, like Simon or Pong, so the code is the only new thing.

Projects

## 24 projects of 77

### Arcade lever

A Sanwa-style arcade lever on four pins, debounced the way a stick board does it and printed in numpad notation: 5 neutral, 8 up, 9 up-right.

Board

Arduino Uno R3

Parts

Arcade joystick lever

Level

Beginner

Open in the simulator

### Tug of war game

Tug of war game for two players on a 15-LED NeoPixel strip: every button press pulls the light one LED your way, and the first to pull it off wins.

Board

Arduino Nano

Parts

Arcade button, WS2812 NeoPixel LEDs, piezo speaker

Level

Beginner

Open in the simulator

### Stop the light game

Stop the light game on a Raspberry Pi Pico: press the button as a red light runs onto the green LED of a 16-LED NeoPixel ring, faster every level.

Board

Raspberry Pi Pico

Parts

WS2812 NeoPixel LEDs, arcade button, piezo speaker

Level

Beginner

Open in the simulator

### Answer ball

Ask a question and tip the tilt switch: the 16x2 LCD shows one of eight answers, picked with random().

Board

Arduino Uno R3

Parts

Tilt switch, 16x2 character LCD

Level

Beginner

Open in the simulator

### Cyber dice: seven-segment on pins 2 to 8, button on 9

A common-cathode seven-segment digit with segments a to g on pins 2 to 8 spins through 1 to 6 while the button on pin 9 is held.

Board

Arduino Uno R3

Parts

Seven-segment display, resistor, push button

Level

Intermediate

Open in the simulator

### Dice on an ESP32-C3

A button rolls a die and an ESP32-C3 tumbles the number onto a seven-segment display.

Board

ESP32-C3-DevKitM-1

Parts

Seven-segment display, resistor, push button

Level

Intermediate

Open in the simulator

### OLED dice

A die tumbling on a 128x64 OLED, thrown by holding an arcade button and slowing to a stop when you let go.

Board

ESP32-C3-DevKitM-1

Parts

SSD1306 OLED display, arcade button

Level

Intermediate

Open in the simulator

### Laser tag: two Nanos

Infrared laser tag for two Arduino Nanos: each button fires an NEC code through an IR LED, and the other player’s VS1838B counts the hit.

Board

Arduino Nano

Parts

Infrared LED, IR receiver and remote, resistor, push button, LED, +1 more

Level

Intermediate

Open in the simulator

### Leverless SOCD cleaning

Four direction buttons that can be held two at a time, cleaned by the neutral or last-input rule a slide switch picks.

Board

SparkFun Pro Micro

Parts

Game console buttons, slide switch, LED, resistor

Level

Intermediate

Open in the simulator

### Fight stick on a Pro Micro

A four-way lever and six buttons on a Pro Micro, debounced with no added delay and reported as a numpad direction plus the buttons held.

Board

SparkFun Pro Micro

Parts

Game console buttons, arcade button

Level

Intermediate

Open in the simulator

### Ring Simon

Simon on a sixteen-LED ring with a rotary encoder: turn the knob to the color you were shown and press the shaft.

Board

ESP32-C3-DevKitM-1

Parts

WS2812 NeoPixel LEDs, KY-040 rotary encoder

Level

Advanced

Open in the simulator

### Tetris on LED matrices

Tetris on LED matrices with an Arduino Mega: two 8x8 MAX7219s make an 8 by 16 field, with four buttons, all seven pieces.

Board

Arduino Mega 2560 R3

Parts

MAX7219 8x8 LED matrix, arcade button, piezo speaker

Level

Advanced

Open in the simulator

### Pico W guess the number: keypad and LCD

MicroPython on a Pico W: a number game on a 4x4 keypad (rows GP21 to GP18.

Board

Raspberry Pi Pico W

Parts

I2C LCD, 4x4 keypad

Level

Advanced

Open in the simulator

### H-pattern shifter and handbrake

Two pots read an H-pattern gate with hysteresis and push-down reverse, two microswitches make sequential paddles and a hall sensor is the handbrake.

Board

SparkFun Pro Micro

Parts

TM1637 four-digit display, limit switch, slide potentiometer, arcade button, 49E linear hall sensor

Level

Advanced

Open in the simulator

### Pinball table

A table you can play on a Mega: flippers, pop bumpers on a kicker solenoid, targets, a drain beam and a plunger, with a four-digit score.

Board

Arduino Mega 2560 R3

Parts

TM1637 four-digit display, WS2812 NeoPixel LEDs, pinball table, MOSFET, diode, +3 more

Level

Advanced

Open in the simulator

### D-pad pong

A TFT, a console pad and a piezo on an Uno: paddle game, arrow keys or clicks, A to serve.

Board

Arduino Uno R3

Parts

ILI9341 TFT display, game console buttons, piezo speaker

Level

Advanced

Open in the simulator

### Autopilot and landing gear panel

An autopilot knob for heading, altitude and vertical speed on a four-digit display, an AP button.

Board

SparkFun Pro Micro

Parts

TM1637 four-digit display, KY-040 rotary encoder, slide switch, arcade button, LED, +1 more

Level

Advanced

Open in the simulator

### Spaceship control panel

Arm three systems, pass the go/no-go poll, lift the safety and launch.

Board

Arduino Mega 2560 R3

Parts

Slide switch, LED arcade button, TM1637 four-digit display, piezo speaker, WS2812 NeoPixel LEDs, +7 more

Level

Advanced

Open in the simulator

### Pocket pet

A Tamagotchi-style pet on a 128x64 OLED: hatch it, feed it, play two mini-games, clean up, and it remembers you after a reset.

Board

Arduino Uno R3

Parts

SSD1306 OLED display, push button, piezo speaker

Level

Advanced

Open in the simulator

### Handheld game console

A pocket console you can build: an ESP32-C3, a color TFT, a D-pad, A, B, Start and Select, chiptune on a piezo and a battery gauge.

Board

ESP32-C3-DevKitM-1

Parts

ILI9341 TFT display, game console buttons, piezo speaker, push button, battery: AA, +1 more

Level

Advanced

Open in the simulator

### Escape-room puzzle box

Five puzzles in ten minutes: a keypad code, a magnet key, the right RFID card, a tilt sequence and three flashes of light.

Board

Arduino Mega 2560 R3

Parts

4x4 keypad, reed switch, piezo speaker, MPU6050 accelerometer and gyro, servo motor, +6 more

Level

Advanced

Open in the simulator

### Mixbox-style controller on a Pico

W A S D directions for the left hand and eight lit buttons for the right, on GP2040-CE’s Pico pins, with SOCD modes, turbo and an OLED input display.

Board

Raspberry Pi Pico

Parts

SSD1306 OLED display, arcade button, LED arcade button

Level

Advanced

Open in the simulator

### ESP32-C3 Simon

Four LEDs flash a growing sequence, four buttons play it back.

Board

ESP32-C3-DevKitM-1

Parts

Resistor, LED, push button

Level

Advanced

Open in the simulator

### Rhythm game

Notes fall down four lanes of a WS2812 panel to Ode to Joy.

Board

Arduino Uno R3

Parts

WS2812 NeoPixel LEDs, I2C LCD, piezo speaker, resistor, LED arcade button

Level

Advanced

Open in the simulator

See all 77 Arduino game projects on the templates page

Keep going

## Wiring, libraries and more ideas

Every project ideas list

### Wiring guides

- buzzer to Arduino Uno
- buzzer to Raspberry Pi Pico
- buzzer to Arduino Nano
- push button to Arduino Uno
- push button to Arduino Mega
- push button to Raspberry Pi Pico
- push button to Arduino Nano
- LED to Arduino Uno

### Library pages

- Adafruit GFX library
- Adafruit NeoPixel library
- LedControl library
- LiquidCrystal I2C library
- Servo library
- TM1637 library

### More project ideas

- Arduino Uno project ideas
- ESP32 project ideas
- Pro Micro and Leonardo project ideas
- Raspberry Pi Pico project ideas
- Projects with a piezo speaker
- Projects with an arcade button
- Projects with a push button
- LED projects for Arduino, ESP32 and Pico
- OLED display projects
- Projects with an ILI9341 TFT display
- Projects with a joystick
- NeoPixel projects
