Source: https://mokxi.com/ideas/esp32-iot
Updated: 2026-11-17

Projects / Project ideas
ESP32 IoT

# ESP32 IoT project ideas

These ESP32 projects are tagged IoT. They cover web servers on your WiFi, Bluetooth and BLE lamps, ESP-NOW between boards and Home Assistant sensors. There are 23 (8 beginner, 14 intermediate and 1 advanced). Here are all of them, from “MicroPython WiFi access point mode on an ESP32” to “Smart home hub”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “ESP32 NTP clock on a TM1637 display”, a beginner project that needs a TM1637 display.
- Most of them are intermediate projects. Pick one a level below what you think you can do, finish it, then move up.
- The parts used most here are the LED (11 projects), the push button (4) and the DHT11 or DHT22 sensor (3). With those on hand, most of this list is open to you.
- Start with the project that joins WiFi and serves a page; every other IoT build here is that plus a sensor or a relay.

Projects

## 23 projects ready to run

### MicroPython WiFi access point mode on an ESP32

MicroPython on an ESP32: network.WLAN(AP_IF) starts a hotspot of the board’s own and prints its name and its IP settings.

Board

ESP32-DevKitC V4

Parts

Just the board

Level

Beginner

Open in the simulator

### ESP32 NTP clock on a TM1637 display

An ESP32 gets the time from an NTP server with NTPClient and shows hours and minutes on a TM1637 four-digit display, the colon blinking every second.

Board

ESP32 DevKit V1

Parts

TM1637 four-digit display

Level

Beginner

Open in the simulator

### MicroPython WiFi station mode on an ESP32

MicroPython on an ESP32: network.WLAN(STA_IF) joins Mokxi’s simulated access point and prints the IP address the router hands out.

Board

ESP32-DevKitC V4

Parts

Just the board

Level

Beginner

Open in the simulator

### Plant sensor for Home Assistant

A capacitive soil sensor mapped between two calibration readings, a light level, and a thirsty LED with two thresholds so it does not flicker.

Board

ESP32-C3-DevKitM-1

Parts

Photoresistor module, capacitive soil moisture sensor, resistor, LED

Level

Beginner

Open in the simulator

### ESP32 Bluetooth serial lamp

BluetoothSerial on the ESP32: pair with ESP32-Lamp in the Bluetooth tab, send on or off, and the LED answers.

Board

ESP32 DevKit V1

Parts

Resistor, LED

Level

Beginner

Open in the simulator

### WiFi: join the network

The connect loop every ESP32 tutorial opens with, on a simulated network: no 802.11, and the address a simulated DHCP hands out.

Board

ESP32-C3-DevKitM-1

Parts

Just the board

Level

Beginner

Open in the simulator

### ESP32 web server with two LEDs

The Random Nerd Tutorials ESP32 web server: press Run, open the Web panel, and its ON and OFF buttons switch the LEDs on GPIO 26 and 27.

Board

ESP32 DevKit V1

Parts

Resistor, LED

Level

Beginner

Open in the simulator

### ESP32 access point web server

The ESP32 makes its own WiFi network, MyESP: press Run, open the Web panel, which joins it as a phone.

Board

ESP32 DevKit V1

Parts

Resistor, LED

Level

Beginner

Open in the simulator

### WiFi: a lamp on a web page

A WebServer with two buttons and a form. Press one in the Web panel and the LED on the breadboard follows; the network under it is simulated.

Board

ESP32-C3-DevKitM-1

Parts

Resistor, LED

Level

Intermediate

Open in the simulator

### ESP-NOW button and LED

Two ESP32s and no wire between them: the button on one sends on or off over ESP-NOW, the other lights its LED and prints each message.

Board

ESP32 DevKit V1

Parts

Push button, resistor, LED

Level

Intermediate

Open in the simulator

### Garage door opener

A relay that presses the opener’s wall button for half a second and two reed switches that say closed, opening, open, closing or stopped.

Board

ESP32-C3-DevKitM-1

Parts

Reed switch, push button, relay module

Level

Intermediate

Open in the simulator

### Radar hallway sensor

An RCWL-0516 radar holds a hallway "occupied" for ten seconds after the last movement and lights the lamp only when it is dark.

Board

ESP32-C3-DevKitM-1

Parts

Photoresistor module, microwave motion sensor, resistor, LED

Level

Intermediate

Open in the simulator

### Home Assistant multisensor

Temperature, humidity, light and motion on one ESP32-C3, the room sensor Home Assistant users build first.

Board

ESP32-C3-DevKitM-1

Parts

Light sensor, DHT11 or DHT22 sensor, PIR motion sensor, resistor, LED

Level

Intermediate

Open in the simulator

### LED strip controller

Sixteen WS2812B pixels with on, off, brightness, color and two effects, faded between, from two buttons and a knob on the strip or from the Web tab.

Board

ESP32-C3-DevKitM-1

Parts

Potentiometer, push button, WS2812 NeoPixel LEDs

Level

Intermediate

Open in the simulator

### API lab: fetch JSON

Call an API with normal HTTPClient code, edit its JSON response in Cloud and inspect the complete request and response.

Board

ESP32-C3-DevKitM-1

Parts

Just the board

Level

Intermediate

Open in the simulator

### MicroPython WiFi AP and station at once on an ESP32

MicroPython on an ESP32: the board starts its own hotspot and joins Mokxi’s simulated access point at the same time, and prints both addresses.

Board

ESP32-DevKitC V4

Parts

Just the board

Level

Intermediate

Open in the simulator

### ESP32 Telegram doorbell with a PIR sensor

An ESP32 doorbell: the button rings a buzzer and sends you a Telegram message with UniversalTelegramBot, and a PIR sensor reports motion at the door.

Board

ESP32 DevKit V1

Parts

Push button, buzzer, PIR motion sensor

Level

Intermediate

Open in the simulator

### MicroPython WiFi weather on an ESP32

MicroPython on an ESP32 DevKit: network.WLAN joins the simulated access point and urequests fetches the weather from http.

Board

ESP32 DevKit V1

Parts

Just the board

Level

Intermediate

Open in the simulator

### WiFi: fetch the weather

HTTPClient against a simulated origin, with the numbers on a dial in the Cloud panel, and a request to the real internet that is refused.

Board

ESP32-C3-DevKitM-1

Parts

Just the board

Level

Intermediate

Open in the simulator

### ESP32 BLE UART lamp

A Bluetooth LE server with the Nordic UART service: connect from the Bluetooth tab, write on or off to RX, and turn on TX notifications for the reply.

Board

ESP32 DevKit V1

Parts

Resistor, LED

Level

Intermediate

Open in the simulator

### ESP32 DHT22 weather web server

ESP32 DHT22 weather web server: the board serves its own page with the temperature in C and F and the humidity, plus the same reading as JSON.

Board

ESP32 DevKit V1

Parts

DHT11 or DHT22 sensor

Level

Intermediate

Open in the simulator

### ESP32 async web server: BME280, slider and relay

ESPAsyncWebServer serves a page with BME280 temperature, humidity and pressure, a slider that dims an LED and a button that switches a relay.

Board

ESP32 DevKit V1

Parts

BME280 weather sensor, resistor, LED, relay module, DC jack and adapter, +1 more

Level

Intermediate

Open in the simulator

### Smart home hub

An ESP32-C3 web dashboard that switches a lamp and a fan through relays, dims a porch light, reads temperature, humidity and motion.

Board

ESP32-C3-DevKitM-1

Parts

Two-channel relay board, filament lamp, DC motor, LED, resistor, +4 more

Level

Advanced

Open in the simulator

Keep going

## Wiring, libraries and more ideas

Every project ideas list

### Wiring guides

- push button to ESP32
- DHT22 to ESP32
- PIR motion sensor to ESP32
- relay module to ESP32
- BME280 to ESP32
- DS3231 RTC to ESP32
- I2C LCD to ESP32
- potentiometer to ESP32

### Library pages

- DHT sensor library
- Adafruit BME280 library
- Adafruit NeoPixel library
- Adafruit Unified Sensor library
- Async TCP library
- BH1750 library

### More project ideas

- ESP32 project ideas
- LED projects for Arduino, ESP32 and Pico
- Projects with a push button
- Projects with a DHT11 or DHT22 sensor
- Projects with a PIR motion sensor
- Projects with a lamp
- Projects with a light sensor module
- Projects with a relay module
- Home automation projects with ESP32 and Arduino
- IoT project ideas for ESP32 and Pico W
- Weather station projects
- Arduino music and sound projects
