Source: https://mokxi.com/ideas/bme280-projects
Updated: 2026-11-17

Projects / Project ideas
Project ideas by part

# Projects with a BME280 sensor

7 Mokxi projects use a BME280 sensor (1 beginner, 5 intermediate and 1 advanced). They run on Arduino Uno, ESP32 and Raspberry Pi Pico boards. Here are all of them, from “CircuitPython BME280 on a Pico” to “LoRa weather station with acknowledgments”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “CircuitPython BME280 on a Pico”, a beginner project that needs a BME280 sensor.
- Arduino Uno runs 2 of them, ESP32 2 and Raspberry Pi Pico 2. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the SSD1306 OLED display (2 projects), the filament lamp (1) and the I2C LCD (1). With those on hand, most of this list is open to you.
- Before you build one on a real bench, read the BME280 weather sensor wiring guide for your board below. It gives every pin and the voltage notes.

Projects

## 7 projects ready to run

### CircuitPython BME280 on a Pico

CircuitPython on a Raspberry Pi Pico: busio.I2C and Adafruit’s adafruit_bme280 read the temperature.

Board

Raspberry Pi Pico

Parts

BME280 weather sensor

Level

Beginner

Open in the simulator

### Indoor and outdoor thermometer on two OLEDs

Two BME280s and two SSD1306 OLEDs share their addresses, so a TCA9548A puts each pair on its own channel: each screen shows its own weather.

Board

Arduino Uno R3

Parts

I2C multiplexer, BME280 weather sensor, SSD1306 OLED display

Level

Intermediate

Open in the simulator

### BME280 on a Pi Zero 2 W with smbus2

A Raspberry Pi Zero 2 W reads a BME280 over I2C with smbus2 and the datasheet formulas: temperature, pressure and humidity every two seconds.

Board

Raspberry Pi Zero 2 W

Parts

BME280 weather sensor

Level

Intermediate

Open in the simulator

### MicroPython BME280 weather on an OLED

MicroPython on a Raspberry Pi Pico: machine.I2C reads a BME280 and shows temperature, pressure and humidity on an SSD1306 OLED with ssd1306.py.

Board

Raspberry Pi Pico

Parts

SSD1306 OLED display, BME280 weather sensor

Level

Intermediate

Open in the simulator

### ESP32 async web server: BME280, slider and relay

ESPAsyncWebServer serves a page with BME280 temperature, humidity and pressure, a slider that dims an LED and a button that switches a relay.

Board

ESP32 DevKit V1

Parts

BME280 weather sensor, resistor, LED, relay module, DC jack and adapter, +1 more

Level

Intermediate

Open in the simulator

### Two barometers

A BME280 and a BMP280 on one I2C bus, told apart by their address straps and their chip ids.

Board

ESP32-C3-DevKitM-1

Parts

BME280 weather sensor, pressure and temperature

Level

Intermediate

Open in the simulator

### LoRa weather station with acknowledgments

A BME280 node sends temperature, humidity and pressure over LoRa with RadioHead, and a gateway acknowledges each reading and shows it on an I2C LCD.

Board

Arduino Uno R3

Parts

LoRa module, BME280 weather sensor, I2C LCD

Level

Advanced

Open in the simulator

Keep going

## Wiring, libraries and more ideas

The BME280 weather sensor part page Every project ideas list

### Wiring guides

- BME280 to Arduino Uno
- BME280 to ESP32
- BME280 to Arduino Nano

### Library pages

- Adafruit BME280 library
- BlueDot BME280 library
- BME280 library
- forcedBMX280 library
- Grove - Barometer Sensor BME280 library
- i2cdetect library

### More project ideas

- Arduino Uno project ideas
- ESP32 project ideas
- Raspberry Pi Pico project ideas
- OLED display projects
- Projects with a lamp
- Projects with an I2C LCD
- LED projects for Arduino, ESP32 and Pico
- Projects with a relay module
