Source: https://mokxi.com/ideas/arduino-beginner
Updated: 2026-11-17

Projects / Project ideas
Arduino for beginners

# Arduino projects for beginners

These are the beginner projects on an Arduino Uno, Nano or Mega, with LEDs, buttons, buzzers, a knob and a first display. There are 228. Here are 24, from “Night light with a light sensor” to “Crosswalk”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

## How to pick your first one

- Start with “8-channel relay board”, a beginner project that needs an 8-channel relay board.
- Arduino Uno runs 221 of them, Arduino Nano 5 and Arduino Mega 2. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the LED (55 projects), the push button (40) and the piezo speaker (26). With those on hand, most of this list is open to you.
- You do not need to own a board to start. Every one of these runs in the simulator, and the same sketch uploads to a real Uno later.

Projects

## 24 projects of 228

### Night light with a light sensor

A light-dependent resistor in a divider fades a lamp up when the room goes dark. Drag the slider on the sensor.

Board

Arduino Uno R3

Parts

Photoresistor, resistor, LED

Level

Beginner

Open in the simulator

### Stopwatch with lap times

Stopwatch with lap times on an Arduino Nano and a 16x2 LCD: one button starts, stops and carries on, the other takes laps or resets.

Board

Arduino Nano

Parts

Arcade button, piezo speaker, I2C LCD

Level

Beginner

Open in the simulator

### Light theremin

A phototransistor reads the light and a piezo plays it as a pitch, higher for more light: the Arduino Starter Kit theremin.

Board

Arduino Uno R3

Parts

Phototransistor, resistor, piezo speaker

Level

Beginner

Open in the simulator

### Uno R4 knob

A potentiometer on an Uno R4’s A0 fades an LED on pin 9, and the monitor prints the same pin in ten bits and in the converter’s own fourteen.

Board

Arduino Uno R4 Minima

Parts

Potentiometer, resistor, LED

Level

Beginner

Open in the simulator

### Electronic voting machine

Electronic voting machine on an Arduino Nano: four buttons to vote, a result button for every count and the winner on an LCD.

Board

Arduino Nano

Parts

Arcade button, piezo speaker, I2C LCD

Level

Beginner

Open in the simulator

### Photocell module on A0

A photoresistor module’s analog output on A0, printed twice a second: more light, a different number. Drag the light level and watch it change.

Board

Arduino Uno R3

Parts

Photoresistor module

Level

Beginner

Open in the simulator

### Mega four serial ports

Three of the Mega's four USARTs, each with its TX jumpered back to its own RX, reporting on the fourth.

Board

Arduino Mega 2560 R3

Parts

Just the board

Level

Beginner

Open in the simulator

### Ultrasonic theremin

Ultrasonic theremin on an Arduino Nano: wave a hand over an HC-SR04 to play notes of a pentatonic scale, or glide the pitch like a real theremin.

Board

Arduino Nano

Parts

HC-SR04 ultrasonic sensor, arcade button, piezo speaker

Level

Beginner

Open in the simulator

### LCD1602 hello

A 16x2 character LCD on six pins with the LiquidCrystal library: a greeting on the top line and the seconds since reset under it.

Board

Arduino Uno R3

Parts

16x2 character LCD

Level

Beginner

Open in the simulator

### UV index meter

A GUVA-S12SD UV sensor and a 16x2 I2C LCD: the UV index and how risky it is, from low to extreme. Drag the sunshine.

Board

Arduino Uno R3

Parts

UV sensor, I2C LCD

Level

Beginner

Open in the simulator

### Nano dial

A potentiometer on the Nano's A7, the analog-only pin an Uno does not have, fades an LED on pin 9.

Board

Arduino Nano

Parts

Potentiometer, resistor, LED

Level

Beginner

Open in the simulator

### Analog sound module on A0

A microphone module’s analog output on A0, printed twice a second: clap and the number jumps.

Board

Arduino Uno R3

Parts

Sound sensor

Level

Beginner

Open in the simulator

### Tug of war game

Tug of war game for two players on a 15-LED NeoPixel strip: every button press pulls the light one LED your way, and the first to pull it off wins.

Board

Arduino Nano

Parts

Arcade button, WS2812 NeoPixel LEDs, piezo speaker

Level

Beginner

Open in the simulator

### Robotic hand with flex sensors

Robotic hand with flex sensors on an Arduino Mega: five flex sensors on a glove move five servo fingers, and the Serial Monitor names the gesture.

Board

Arduino Mega 2560 R3

Parts

Servo motor, flex sensor

Level

Beginner

Open in the simulator

### Temperature and light on one I2C bus

A TMP117 temperature sensor and a VEML7700 light sensor share the Uno’s SDA and SCL at their own addresses.

Board

Arduino Uno R3

Parts

Temperature sensor, ambient light

Level

Beginner

Open in the simulator

### Piezo melody

The Uno plays the opening of Ode to Joy on a piezo with tone() and noTone().

Board

Arduino Uno R3

Parts

Resistor, LED, piezo speaker

Level

Beginner

Open in the simulator

### Uno R4 WiFi heart

A heart beating on the Uno R4 WiFi’s 12 x 8 LED matrix, drawn through Arduino_LED_Matrix.h with no parts to wire.

Board

Arduino Uno R4 WiFi

Parts

Just the board

Level

Beginner

Open in the simulator

### Stepper motor on pins 8 to 11

A 28BYJ-48 on its ULN2003 board with IN1 to IN4 on pins 8 to 11: the Stepper library turns the shaft one full turn one way, then back.

Board

Arduino Uno R3

Parts

28BYJ-48 stepper and ULN2003

Level

Beginner

Open in the simulator

### 8-channel relay board

An eight-channel relay board on pins 2 to 9 clicks through its channels one at a time. Active low, and every pin is written HIGH first.

Board

Arduino Uno R3

Parts

8-channel relay board

Level

Beginner

Open in the simulator

### Cat laser toy

A KY-008 laser on a pan and tilt pair of servos wanders its dot around the floor for a minute, then rests until the button is pressed.

Board

Arduino Uno R3

Parts

Laser module, servo motor, push button

Level

Beginner

Open in the simulator

### RGB colors on pins 11, 10 and 9

An RGB LED with red on pin 11, green on 10 and blue on 9, each through 220 ohm: analogWrite shows seven colors in turn and names each one.

Board

Arduino Uno R3

Parts

RGB LED, resistor

Level

Beginner

Open in the simulator

### Lit button

A 30 mm arcade button with an LED inside: the lamp breathes while it waits, goes full bright while held, and every press is counted.

Board

Arduino Uno R3

Parts

LED arcade button

Level

Beginner

Open in the simulator

### Blink an LED on pin 9

An LED and a 220 ohm resistor on pin 9, switched on and off once a second: the first sketch, on a pin you wire yourself.

Board

Arduino Uno R3

Parts

Resistor, LED

Level

Beginner

Open in the simulator

### Crosswalk

A traffic light module runs green, yellow and red on its own, and a button asks for the walk signal sooner; a piezo beeps while it is safe to cross.

Board

Arduino Uno R3

Parts

Traffic light module, push button, piezo speaker

Level

Beginner

Open in the simulator

See all 228 beginner projects on the templates page

Keep going

## Wiring, libraries and more ideas

Every project ideas list

### Wiring guides

- LED to Arduino Uno
- LED to Arduino Nano
- LED to Arduino Mega
- push button to Arduino Uno
- push button to Arduino Nano
- push button to Arduino Mega
- buzzer to Arduino Uno
- buzzer to Arduino Nano

### Library pages

- LiquidCrystal I2C library
- Adafruit NeoPixel library
- Servo library
- IRremote library
- LiquidCrystal library
- LedControl library

### More project ideas

- Arduino Uno project ideas
- Arduino Nano project ideas
- Arduino Mega project ideas
- LED projects for Arduino, ESP32 and Pico
- Projects with a push button
- Projects with a piezo speaker
- Projects with an I2C LCD
- NeoPixel projects
- Projects with a potentiometer
- Servo motor projects
- Projects with a buzzer
- Arduino game projects
